FED30-12S1P5 P-DUKE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

VER:00 Page 1 of 3 Issued Date：2008/07/11 INPUT SPECIFICATIONS Input voltage range 12V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Pi type Input surge voltage 100mS max 12V input 24V input 48V input 25VDC 50VDC 100VDC Input reflected ripple current Nominal Vin and full load 20mAp-p Start up time Nominal Vin and constant resistive load Power up Remote ON/OFF 30mS, typ. 30mS, typ. Start-up voltage 12V input 24V input 48V input 9VDC 18VDC 36VDC Shutdown voltage 12V input 24V input 48V input 8VDC 16VDC 32VDC Remote ON/OFF (Note 6) (Positive logic)(Standard) (Negative logic)(Option) DC-DC ON DC-DC OFF DC-DC ON DC-DC OFF Open or 3V < Vr < 12V Short or 0V < Vr < 1.2V Short or 0V < Vr < 1.2V Open or 3V < Vr < 12V Input current of Remote control pin Nominal Vin -0.5mA ~ +0.5mA Remote off state input current Nominal Vin 3mA ENVIRONMENTAL SPECIFICATIONS -40ºC to +50ºC (without derating)Operating ambient temperature +50ºC to +85ºC (with derating) Maximum case temperature 105ºC Storage temperature range -55ºC to +125ºC Over temperature protection 115ºC, typ. Thermal impedance (Note 7) Nature convection Nature convection with heat-sink 12ºC/Watt 10ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 8) EN55022 Class A ESD EN61000-4-2 Air Contact ± 8KV ± 6KV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 9) EN61000-4-4 ± 2KV Perf. Criteria A Surge (Note 9) EN61000-4-5 ± 1KV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A OUTPUT SPECIFICATIONS Output power 30 Watts max. Voltage accuracy Full load and nominal Vin ±1% Voltage adjustability Single output ± 10% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% Load regulation No load to Full load Single Dual ± 0.5% ± 1% Cross regulation (Dual) Asymmetr ical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth (Measured with a 1uF/50V MLCC) 1.5-5.1Vo 100mVp-p 12-15Vo 150mVp-p Temperature coefficient ±0.02% / ºC, max. Transient response recovery time 25% load step change 250μS Over voltage protection Zener diode clamp 1.5V 2.5V 3.3V 5.0V & 5.1V & ±5V 12V & ±12V 15V & ±15V Output Output Output Output Output Output 2.0V 3.3V 3.9V 6.2V 15V 18V Over load protection % of FL at nominal input 150%, typ. Short circuit protection Hiccup, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output Input (Output) to Case 1600VDC, min. 1600VDC, min. Case grounding Connect case to -Vin with decoupling Y Cap Isolation resistance 10 ohms, min. Isolation capacitance 1500pF, max. Switching frequency 430KHz, typ. Design meets safety standard IEC60950-1, UL60950-1, EN60950-1 Case material Nickel-coated copper Base material FR4 PCB Potting material Epoxy (UL94-V0) Dimensions 2.00 X 1.00 X 0.40 Inch (50.8X 25.4 X 10.2 mm) Weight 30.5g(1.07oz) MTBF (Note 1) BELLCORE-TR-NWT-000332 MIL-HDBK-217F 3.173 x 10 hrs. 5.548 x 10 hrs. TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted

FEATURES

  • 30 WATTS OUTPUT POWER
  • OUTPUT CURRENT UP TO 8.5A
  • STANDARD 2.00 X 1.00 X 0.40 INCH
  • HIGH EFFICIENCY UP TO 91%
  • 2:1 WIDE INPUT VOLTAGE RANGE
  • SIX-SIDED CONTINUOUS SHIELD
  • FIXED SWITCHING FREQUENCY
  • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 89/336 EEC
  • DESIGN MEETS UL60950-1, EN60950-1 AND IEC60950-1
  • ISO9001 CERTIFIED MANUFACTURING FACILITIES
  • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS Negative logic Remote On/Off

DESCRIPTION

The FED30 series offer 30 watts of output power from a 2 x 1 x 0.4 inch package. FED30 series have 2:1 wide input voltage of 9-18 and 18-36 and 36-75VDC. The FED30 series have features 1600VDC of isolation, short circuit protection, over-current protection, over-voltage protection, over-temperature protection and six sided shielding.

APPLICATIONS

VER:00 Page 2 of 3 Issued Date：2008/07/11 Output Current Input Current Model Number Input Range Output Voltage Min. Load Max. Load Output (4) Ripple & Noise No load (3) Full Load (2) Eff (4) (%) Capacitor(5) Load max FED30-12S1P5 9 – 18 VDC 1.5 VDC 0mA 8500mA 100mVp-p 70mA 1416mA 79 20000μF FED30-12S2P5 9 – 18 VDC 2.5 VDC 0mA 8000mA 100mVp-p 100mA 2083mA 84 20000μF FED30-12S3P3 9 – 18 VDC 3.3 VDC 0mA 8000mA 100mVp-p 90mA 2716mA 85 20000μF FED30-12S05 9 – 18 VDC 5.0 VDC 0mA 6000mA 100mVp-p 130mA 3012mA 87 14400μF FED30-12S5P1 9 – 18 VDC 5.1 VDC 0mA 6000mA 100mVp-p 130mA 3072mA 87 14400μF FED30-12S12 9 – 18 VDC 12 VDC 0mA 2500mA 150mVp-p 90mA 2941mA 89 3000 μF FED30-12S15 9 – 18 VDC 15 VDC 0mA 2000mA 150mVp-p 80mA 2941mA 89 2000μF FED30-12D05 9 – 18 VDC ±5VDC 0mA ±3000mA 100mVp-p 90mA 3012mA 87 ± 3000 μF FED30-12D12 9 – 18 VDC ±12VDC 0mA ±1250mA 150mVp-p 50mA 3012mA 87 ± 2000μF FED30-12D15 9 – 18 VDC ±15VDC 0mA ±1000mA 150mVp-p 40mA 3012mA 87 ± 1300 μF FED30-24S1P5 18 – 36 VDC 1.5 VDC 0mA 8500mA 100mVp-p 50mA 700mA 80 20000μF FED30-24S2P5 18 – 36 VDC 2.5 VDC 0mA 8000mA 100mVp-p 50mA 1028mA 85 20000 μF FED30-24S3P3 18 – 36 VDC 3.3 VDC 0mA 8000mA 100mVp-p 50mA 1325mA 87 20000μF FED30-24S05 18 – 36 VDC 5.0 VDC 0mA 6000mA 100mVp-p 75mA 1453mA 90 14400 μF FED30-24S5P1 18 – 36 VDC 5.1 VDC 0mA 6000mA 100mVp-p 75mA 1482mA 90 14400μF FED30-24S12 18 – 36 VDC 12 VDC 0mA 2500mA 150mVp-p 40mA 1437mA 91 3000 μF FED30-24S15 18 – 36 VDC 15 VDC 0mA 2000mA 150mVp-p 30mA 1437mA 91 2000μF FED30-24D05 18 – 36 VDC ±5VDC 0mA ±3000mA 100mVp-p 70mA 1453mA 90 ± 3000 μF FED30-24D12 18 – 36 VDC ±12VDC 0mA ±1250mA 150mVp-p 30mA 1471mA 89 ± 2000μF FED30-24D15 18 – 36 VDC ±15VDC 0mA ±1000mA 150mVp-p 30mA 1453mA 90 ± 1300 μF FED30-48S1P5 36 – 75 VDC 1.5 VDC 0mA 8500mA 100mVp-p 45mA 350mA 80 20000μF FED30-48S2P5 36 – 75 VDC 2.5 VDC 0mA 8000mA 100mVp-p 45mA 514mA 85 20000 μF FED30-48S3P3 36 – 75 VDC 3.3 VDC 0mA 8000mA 100mVp-p 30mA 663mA 87 20000μF FED30-48S05 36 – 75 VDC 5.0 VDC 0mA 6000mA 100mVp-p 45mA 727mA 90 14400 μF FED30-48S5P1 36 – 75 VDC 5.1 VDC 0mA 6000mA 100mVp-p 45mA 750mA 89 14400μF FED30-48S12 36 – 75 VDC 12 VDC 0mA 2500mA 150mVp-p 40mA 718mA 91 3000 μF FED30-48S15 36 – 75 VDC 15 VDC 0mA 2000mA 150mVp-p 40mA 718mA 91 2000μF FED30-48D05 36 – 75 VDC ±5VDC 0mA ±3000mA 100mVp-p 35mA 727mA 90 ± 3000 μF FED30-48D12 36 – 75 VDC ±12VDC 0mA ±1250mA 150mVp-p 30mA 744mA 88 ± 2000μF FED30-48D15 36 – 75 VDC ±15VDC 0mA ±1000mA 150mVp-p 20mA 735mA 89 ± 1300 μF Note 1. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) MIL-STD-217F Notice2 @Ta=25 ºC, Full load (Ground, Benign, controlled environment) 2. Maximum value at nominal input voltage. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. The ON/OFF control pin voltage is referenced to -Input. 7. Heat sink is optional and P/N: 7G-0020A-F. 8. The FED30 series can meet EN55022 Class A with parallel an external capacitor to the input pins. Recommend: 12Vin : 10 μF/25V X7R 1812 MLCC; 24Vin : 4.7μF/50V X7R 1812 MLCC; 48Vin : 2.2μF/100V X7R 1812 MLCC . 9. An external filter capacitor is required if the module has to meet EN61000-4-4,EN61000-4-5. The filter capacitor Power Mate suggest: 12Vin & 24Vin : Nippon chemi-con KY series, 330μF/50V, ESR 55mΩ. 48Vin : Nippon chemi-con KY series, 220 μF/100V, ESR 48mΩ EFFICIENCY (%) FED30-48S05 Efficiency VS Output Load 85% 87% 89% 91% 93% 95% 36 40 44 48 52 56 60 64 68 72 76 INPUT VOLTAGE (V) FED30-48S05 Efficiency VS Input voltage FED30-48S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) EFFICIENCY (%) FED30-48S05 Efficiency VS Output Load OUTPUT POWER (%) 100 120 -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE(℃) FED30-48S05 Derating Curve with Heat-Sink 100 120 -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE(℃) OUTPUT POWER (%) FED30-48S05 Derating Curve

VER:00 Page 3 of 3 Issued Date：2008/07/11 Recommended Filter for EN55022 Class A Compliance The components used in the above figure, together with the manufacturers’ part numbers for these components, are as follows: Single Output C1 C2 & C3 FED30-12S XX 10 μF/25V 1812 MLCC 1000pF/2KV 1808 MLCC FED30-24S XX 6.8 μF/50V 1812 MLCC 1000pF/2KV 1808 MLCC FED30-48S XX 2.2 μF/100V 1812 MLCC 1000pF/2KV 1808 MLCC Dual Output C1 C2 & C4 FED30-12D XX 10 μF/25V 1812 MLCC 1000pF/2KV 1808 MLCC FED30-24D XX 6.8 μF/50V 1812 MLCC 1000pF/2KV 1808 MLCC FED30-48D XX 2.2 μF/100V 1812 MLCC 1000pF/2KV 1808 MLCC Recommended EN55022 Class A Filter Circuit Layout 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) PIN CONNECTION PIN SINGLE DUAL 1 + INPUT + INPUT 2 - INPUT - INPUT

3 CTRL CTRL

6 TRIM - OUTPUT

Output can be externally trimmed by using the method shown below. TRIM UP RU TRIM DOWN RD