FED30TW_14 P-DUKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
1 www.PDUKE.com 2014/04/30 FED30TW SERIES DC-DC CONVERTER 4 : 1 ULTRA WIDE INPUT RANGE UP TO 30Watts FEATURES APPLICATIONS
- 1600VDC INPUT TO OUTPUT ISOLATION
- STANDARD 2.00 X 1.00 X 0.40 INCH
- SIX-SIDED CONTINUOUS SHIELD
- UL60950-1, EN60950-1, IEC60950-1, & EN50155 SAFETY APPROVALS
- CE MARKED
- COMPLIANT TO RoHS II & REACH
- WIRELESS NETWORK
- TELECOM/DATACOM
- INDUSTRY CONTROL SYSTEM
- DISTRIBUTED POWER ARCHITECTURES
- SEMICONDUCTOR EQUIPMENT 1600VDC ISOLATION REMOTE CONTROL UVP OCP SCP OVP OTP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 otherwise noted℃ Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load (2) Min. Load (1) Full Load Model Number VDC VDC mA mA mA % µF FED30-24T3312W 9 ~ 36 3.3 / ±12 500 / ±42 5000 / ±416 105 87 15000 / ± 340 FED30-24T3315W 9 ~ 36 3.3 / ±15 500 / ±33 5000 / ±333 105 87 15000 / ± 220 FED30-24T0512W 9 ~ 36 5 / ±12 400 / ±42 4000 / ±416 105 88 8000 / ± 340 FED30-24T0515W 9 ~ 36 5 / ±15 400 / ±33 4000 / ±333 105 88 8000 / ± 220 FED30-48T3312W 18 ~ 75 3.3 / ±12 500 / ±42 5000 / ±416 55 87 15000 / ± 340 FED30-48T3315W 18 ~ 75 3.3 / ±15 500 / ±33 5000 / ±333 55 87 15000 / ± 220 FED30-48T0512W 18 ~ 75 5 / ±12 400 / ±42 4000 / ±416 55 88 8000 / ± 340 FED30-48T0515W 18 ~ 75 5 / ±15 400 / ±33 4000 / ±333 55 88 8000 / ± 220 PART NUMBER STRUCTURE FED30 - 48 T 0515 W - N HS Series Name Input Voltage Output Quantity Output Voltage Input Range Remote Control Option Assembly Option Primary / Auxiliary (VDC) (VDC) 24: 48: 9~36 18~75 T: Triple 3312: 3315: 0512: 0515: 3.3 / ±12 3.3 / ±15 5 / ±12 5 / ±15 4:1 /filetall/filetall /filetall/filetall: Positive logic Negative logic /filetall/filetall /filetall/filetall: HS: HC: No assembly Heat-sink Heat-sink with Clamp INPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating input voltage range 24Vin(nom) 48Vin(nom)
75 VDC
Input reflected ripple current 20 mAp-p Start up voltage 24Vin(nom) 48Vin(nom)
18 VDC
24Vin(nom) 48Vin(nom) VDC Start up time Constant resistive load Power up Remote ON/OFF 30 30 ms Input surge voltage 100 ms, max. 24Vin(nom)
48 Vin(nom) 50
100 VDC
(Standard) DC-DC ON DC-DC OFF Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Referred to –Vin pin Negative logic (Option) DC-DC ON DC-DC OFF Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC Remote ON/OFF Input current of Ctrl pin -0.5 +0.5 mA Remote off input current 3 mA
2 www.PDUKE.com 2014/04/30 OUTPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Voltage accuracy 3.3Vout, 5Vout 12Vout, 15Vout -1.0 -5.0 +1.0 +5.0 % Line regulation Low Line to High Line at Full Load 3.3Vout, 5Vout 12Vout, 15Vout -1.0 -5.0 +1.0 +5.0 % Load regulation Min. Load to Full Load 3.3Vout, 5Vo ut 12Vout, 15Vout -1.0 -5.0 +1.0 +5.0 % Ripple and noise 20MHz bandwidth (Measured with a 0.1 µF/50V MLCC) 3.3Vout, 5Vout 12Vout, 15Vout 50 75 mVp-p Temperature coefficient -0.02 +0.02 %/ ℃ Transient response recovery time 25% load step change 250 µs Over voltage protection Zener diode clamp 3.3Vout 5Vout 12Vout 15Vout 3.9 6.2 VDC Over load protection % of Iout rated; Hiccup mode 150 % Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Isolation voltage 1 minute Input to Output Input (Output) to Case 1600 1600 VDC Isolation resistance 500VDC 1 G Ω Isolation capacitance 1500 pF Switching frequency 360 400 440 kHz Safety approvals IEC60950-1, UL60950-1, EN60950-1 Case material Nickel-coated copper Base material FR4 PCB Potting material Epoxy(UL94 V-0) Weight 30.5g (1.07oz) MTBF MIL-HDBK-217F, Full load 1.177 x 10 6 hrs ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating ambient temperature Without derating With derating -40 +50 +50 +85 ℃ Maximum case temperature 105 ℃ Over temperature protection 115 ℃ Storage temperature range -55 +125 ℃ Thermal impedance Vertical direction by natural con vection (20LFM) Without heat-sink With heat-sink ℃ /W Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC SPECIFICATIONS Parameter Conditions Level EMI (3) EN55022 Class A, Class B ESD EN61000-4-2 Air ± 8kV and Contact ± 6kV Perf. C riteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (4) EN61000-4-4 ±2kV Perf. Criteria A Surge (4) EN61000-4-5 ±1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A Note: 1. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. Test by minimum input and constant resistive load 3. The standard modules meet EN55022 Class A and Class B with external components.For more detail information, please contact with P-DUKE. 4. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: 24VDC input Nippon chemi-con KY series, 330 µF/50V The filter capacitor Power Mate suggest::48VDC input Nippon chemi-con KY series, 220 µF/100V CAUTION: This power module is not internally fused. An input line fuse must always be used.
3 www.PDUKE.com 2014/04/30 CHARACTERISTIC CURVE FED30-48T0515W Derating Curve FED30-48T0515W Derati ng Curve With Heat-sink FED30-48T0515W Efficiency vs. Input Voltage FED30-4 8T0515W Efficiency vs. Output Load MECHANICAL DRAWING PIN CONNECTION 1. All dimensions in inch (mm) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) PIN TRIPLE 1 +Vin 2 -Vin