FED30_14 P-DUKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Page 1 of 3 www.pduke.com 2014/4/30 FED30 SERIES
30 WATTS DC -DC CONVERTER
9 ~ 18VDC 18 ~ 36VDC 36 ~ 75VDC Input filter Pi type Input surge voltage 12VDC input 24VDC input 48VDC input 25VDC 100ms, max. 50VDC 100ms, max. 100VDC 100ms, max. Input reflected ripple current 20mAp-p Start up time Nominal input and constant resistive load Power up Remote ON/OFF 30ms 30ms Start-up voltage 12VDC input 24VDC input 48VDC input 9VDC, max. 18VDC, max. 36VDC, max. Shutdown voltage 12VDC input 24VDC input 48VDC input 8VDC 16VDC 32VDC Remote ON/OFF (Note 5) (Positive logic)(Standard) (Negative logic)(Option) DC-DC ON DC-DC OFF DC-DC ON DC-DC OFF Open or 3V < Vr < 12V Short or 0V < Vr < 1.2V Short or 0V < Vr < 1.2V Open or 3V < Vr < 12V Input current of Remote control pin Nominal Input -0.5mA ~ +0.5mA Remote off state input current Nominal Input 3mA ENVIRONMENTAL SPECIFICATIONS -40ºC to +50ºC (without derating) Operating ambient temperature +50ºC to +85ºC (with derating) Maximum case temperature 105ºC Storage temperature range -55ºC to +125ºC Over temperature protection 115ºC Thermal impedance (Note 6) Nature convection Nature convection with heat-sink 12ºC/Watt 10ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 7) EN55022 Class A, Class B ESD EN61000-4-2 Air Contact ± 8kV ± 6kV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 8) EN61000-4-4 ± 2kV Perf. Criteria A Surge (Note 8) EN61000-4-5 ± 1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A OUTPUT SPECIFICATIONS Output power 30 Watts max. Voltage accuracy ±1% Voltage adjustability Single output ± 10% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% Load regulation No load to Full load Single Dual ± 0.5% ± 1% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth (Measured with a 1uF/50V MLCC) 1.5-5.1Vo 100mVp-p 12-15Vo 150mVp-p Temperature coefficient ± 0.02% / ºC, max. Transient response recovery time 25% load step change 250 µs Over voltage protection Zener diode clamp 1.5V 2.5V 3.3V 5.0V & 5.1V & ± 5V 12V & ± 12V 15V & ± 15V Output Output Output Output Output Output 2.0V 3.3V 3.9V 6.2V 15V 18V Over load protection % of FL at nominal input 150% Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output Input (Output) to Case 1600VDC min. 1minute 1600VDC min. 1minute Case grounding Connect case to –input with decoupl ing Y Cap Isolation resistance 500VDC 10 9ohms, min. Isolation capacitance 1500pF, max. Switching frequency 430kHz± 10% Safety approvals IEC60950-1, UL60950-1, & EN60950-1 Case material Nickel-coated copper Base material FR4 PCB Potting material Epoxy (UL94 V-0) Dimensions 2.00 X 1.00 X 0.40 Inch (50.8X 25.4 X 10.2 mm) Weight 30.5g(1.07oz) MTBF (Note 1) MIL-HDBK-217F 1.453 x 10 6 hrs. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
FEATURES
- 30 WATTS MAXIMUM OUTPUT POWER
- OUTPUT CURRENT UP TO 8.5A
- STANDARD 2.00 X 1.00 X 0.40 INCH
- HIGH EFFICIENCY UP TO 91%
- 2:1 WIDE INPUT VOLTAGE RANGE
- SIX-SIDED CONTINUOUS SHIELD
- FIXED SWITCHING FREQUENCY
- UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
- CE MARKED
- COMPLIANT TO RoHS II & REACH OPTIONS NEGATIVE LOGIC REMOTE ON/OFF
DESCRIPTION
The FED30 series offer 30 watts of output power from a 2 x 1 x 0.4 inch package. FED30 series have 2:1 wide input voltage of 9 ~18VDC, 18 ~36 and 36 ~75VDC. The FED30 series have features 1600VDC of isolation, short circuit protection, over-current protection, over-voltage protection, over-temperature protection and six sided shielding.
APPLICATIONS
Page 2 of 3 www.pduke.com 2014/4/30 FED30 SERIES Output Current No load (2) Model Number Input Range Output Voltage Min. Load Max. Load Output (3) Ripple & Noise Input Current Eff (3) (%) Capacitor (4) Load max FED30-12S1P5 9 ~ 18 VDC 1.5 VDC 0mA 8500mA 100mVp-p 70mA 79 20000 µF FED30-12S2P5 9 ~ 18 VDC 2.5 VDC 0mA 8000mA 100mVp-p 100mA 84 20000 µF FED30-12S3P3 9 ~ 18 VDC 3.3 VDC 0mA 8000mA 100mVp-p 90mA 85 20000µF FED30-12S05 9 ~ 18 VDC 5.0 VDC 0mA 6000mA 100mVp-p 130mA 87 14400 µF FED30-12S5P1 9 ~ 18 VDC 5.1 VDC 0mA 6000mA 100mVp-p 130mA 87 14400 µF FED30-12S12 9 ~ 18 VDC 12 VDC 0mA 2500mA 150mVp-p 90mA 89 3000 µF FED30-12S15 9 ~ 18 VDC 15 VDC 0mA 2000mA 150mVp-p 80mA 89 2000 µF FED30-12D05 9 ~ 18 VDC ± 5VDC 0mA ± 3000mA 100mVp-p 90mA 87 ± 3000 µF FED30-12D12 9 ~ 18 VDC ± 12VDC 0mA ± 1250mA 150mVp-p 50mA 87 ± 2000 µF FED30-12D15 9 ~ 18 VDC ± 15VDC 0mA ± 1000mA 150mVp-p 40mA 87 ± 1300 µF FED30-24S1P5 18 ~ 36 VDC 1.5 VDC 0mA 8500mA 100mVp-p 50mA 80 20000 µF FED30-24S2P5 18 ~ 36 VDC 2.5 VDC 0mA 8000mA 100mVp-p 50mA 85 20000 µF FED30-24S3P3 18 ~ 36 VDC 3.3 VDC 0mA 8000mA 100mVp-p 50mA 87 20000µF FED30-24S05 18 ~36 VDC 5.0 VDC 0mA 6000mA 100mVp-p 75mA 90 14400 µF FED30-24S5P1 18 ~ 36 VDC 5.1 VDC 0mA 6000mA 100mVp-p 75mA 90 14400 µF FED30-24S12 18 ~ 36 VDC 12 VDC 0mA 2500mA 150mVp-p 40mA 91 3000 µF FED30-24S15 18 ~ 36 VDC 15 VDC 0mA 2000mA 150mVp-p 30mA 91 2000 µF FED30-24D05 18 ~ 36 VDC ± 5VDC 0mA ± 3000mA 100mVp-p 70mA 90 ± 3000 µF FED30-24D12 18 ~ 36 VDC ± 12VDC 0mA ± 1250mA 150mVp-p 30mA 89 ± 2000 µF FED30-24D15 18 ~ 36 VDC ± 15VDC 0mA ± 1000mA 150mVp-p 30mA 90 ± 1300 µF FED30-48S1P5 36 ~ 75 VDC 1.5 VDC 0mA 8500mA 100mVp-p 45mA 80 20000 µF FED30-48S2P5 36 ~ 75 VDC 2.5 VDC 0mA 8000mA 100mVp-p 45mA 85 20000 µF FED30-48S3P3 36 ~ 75 VDC 3.3 VDC 0mA 8000mA 100mVp-p 30mA 87 20000µF FED30-48S05 36 ~ 75 VDC 5.0 VDC 0mA 6000mA 100mVp-p 45mA 90 14400 µF FED30-48S5P1 36 ~ 75 VDC 5.1 VDC 0mA 6000mA 100mVp-p 45mA 89 14400 µF FED30-48S12 36 ~ 75 VDC 12 VDC 0mA 2500mA 150mVp-p 40mA 91 3000 µF FED30-48S15 36 ~ 75 VDC 15 VDC 0mA 2000mA 150mVp-p 40mA 91 2000 µF FED30-48D05 36 ~ 75 VDC ± 5VDC 0mA ± 3000mA 100mVp-p 35mA 90 ± 3000 µF FED30-48D12 36 ~ 75 VDC ± 12VDC 0mA ± 1250mA 150mVp-p 30mA 88 ± 2000 µF FED30-48D15 36 ~ 75 VDC ± 15VDC 0mA ± 1000mA 150mVp-p 20mA 89 ± 1300 µF Note 1. MIL-HDBK-217F @Ta=25 ºC, Full load. 2. Typical value at nominal input voltage and no load . 3. Typical value at nominal input voltage and full lo ad. 4. Test by minimum input and constant resistive load. 5. The CTRL pin voltage is referenced to -INPUT. 6. Heat-sink is optional and P/N: 7G-0020A-F. 7. The FED30 series standard module meets EN55022 Cla ss A and Class B with external components. For more detail information, please contact with P-DUKE. 8. An external filter capacitor is required if the mo dule has to meet EN61000-4-4,EN61000-4-5. The filter capacitor Power Mate suggest: 12 VDC INPUT & 24 VDC INPUT : Nippon chemi-con KY series, 330µF/50V. 48 VDC INPUT : Nippon chemi-con KY series, 220 µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. EFFICIENCY (%) FED30-48S05 Efficiency VS Ou tpu t Load 8 5 % 8 7 % 8 9 % 9 1 % 9 3 % 9 5 % 3 6 4 0 4 4 4 8 5 2 5 6 6 0 6 4 6 8 7 2 7 6 INPUT VO LTAG E (V) FED30-48S05 Efficiency VS Input voltage FED 30-48S05 Efficien cy VS Ou tpu t Load 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 O U T P U T LO A D (% of Full Load) EFFICIENCY (%) FED30-48S05 Efficiency VS Output Load OUTPUT POWER (%) 100 120 - 4 0 - 2 0 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 AMBIENT TEMPERATURE( ℃ ) FED30-48S05 Derating Curve with Heat-Sink 100 120 - 4 0 - 2 0 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 AMBIENT TEMPERATURE( ℃ ) OUTPUT POWER (%) FED30-48S05 Derating Curve
Page 3 of 3 www.pduke.com 2014/4/30 FED30 SERIES
3 CTRL CTRL
6 TRIM - OUTPUT
- All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) Output can be externally trimmed by using the method shown below. EXTERNAL OUTPUT TRIMMING TRIM UP TRIM DOWN RU RD