FEC15-48D12

FEC15-12S33 P-DUKE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Page 1 of 3 Issued Date：2008/05/21 INPUT SPECIFICATIONS Input voltage range 12V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Pi type Input surge voltage 100mS max 12V input 24V input 48V input 36VDC 50VDC 100VDC Input reflected ripple current Nominal Vin and full load 20mAp-p Start up time Nominal Vin and constant resistive load Power up 20mS, typ. Remote ON/OFF (Option) (Note 7) (Positive logic) (Negative logic) DC-DC ON DC-DC OFF DC-DC ON DC-DC OFF Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V Short or 0V < Vr < 1.2V Open or 3.5V < Vr < 12V Input current of remote control pin Nominal Vin -0.5mA ~ +1mA Remote off state input current Nominal Vin 20mA ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC ~ +85ºC (with derating) Maximum case temperature 100ºC Storage temperature range -55ºC ~ +105ºC Thermal impedance (Note 8) Nature convection Nature convection with heat-sink 12ºC/Watt 10ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 9) EN55022 Class A ESD EN61000-4-2 Air Contact ± 8KV ± 6KV Perf. Criteria B Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 10) EN61000-4-4 ± 2KV Perf. Criteria B Surge (Note 10) EN61000-4-5 ± 1KV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A OUTPUT SPECIFICATIONS Output power 15 Watts, max. Voltage accuracy Full load and nominal Vin ± 1% Minimum load (Note 6) See Table Line regulation LL to HL at Full Load ± 0.5% Load regulation Min. load to Full load Single Dual ± 0.5% ± 1% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth Single Dual 50mVp-p 75mVp-p Temperature coefficient ±0.02% / ºC, max. Transient response recovery time 25% load step change 250μS Over voltage protection (Zener diode clamp) 3.3V output 5V output 12V output 15V output 3.9VDC 6.2VDC 15VDC 18VDC Over load protection % of FL at nominal input 150%, max. Short circuit protection Hiccup, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage 1600VDC, min. Isolation resistance 109ohms, min. Isolation capacitance 300pF, max. Switching frequency Single output Dual output 500KHz, typ. 300KHz, typ. Approvals and standard IEC60950-1, UL60950-1, EN60950-1 Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) Dimensions 2.00 X 1.00 X 0.40 Inch (50.8 X 25.4 X 10.2 mm) Weight 27g (0.95oz) MTBF (Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 2.041 x 10 hrs 1.044 x 10 hrs TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted

FEATURES

• 15 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 4A
• STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 88%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• CE MARK MEETS 2006/95/EC,93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS Positive logic & Negative logic Remote On/Off

DESCRIPTION

The FEC15 series offer 15 watts of output power from a 2 x 1 x 0.4 inch package. The FEC15 series with 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC.

APPLICATIONS

Page 2 of 3 Issued Date：2008/05/21 Output Current Input Current Model Number Input Range Output Voltage Min. load Full load Output (4) Ripple & Noise No load (3) Full load (2) Eff (4) (%) Capacitor (5) Load max FEC15-12S33 9 – 18 VDC 3.3 VDC 0mA 4000mA 50mVp-p 30mA 1467mA 79 10200μF FEC15-12S05 9 – 18 VDC 5 VDC 15mA 3000mA 50mVp-p 25mA 1603mA 82 7050 μF FEC15-12S12 9 – 18 VDC 12 VDC 0mA 1250mA 50mVp-p 25mA 1524mA 86 1035μF FEC15-12S15 9 – 18 VDC 15 VDC 0mA 1000mA 50mVp-p 20mA 1524mA 86 705 μF FEC15-12D05 9 – 18 VDC ± 5 VDC 0mA ± 1500mA 75mVp-p 20mA 1582mA 83 ± 1020μF FEC15-12D12 9 – 18 VDC ± 12 VDC 0mA ± 625mA 75mVp-p 30mA 1524mA 86 ± 495 μF FEC15-12D15 9 – 18 VDC ± 15 VDC ±10mA ± 500mA 75mVp-p 35mA 1563mA 84 ± 165μF FEC15-24S33 18 – 36 VDC 3.3 VDC 0mA 4000mA 50mVp-p 15mA 724mA 80 10200 μF FEC15-24S05 18 – 36 VDC 5 VDC 15mA 3000mA 50mVp-p 10mA 781mA 84 7050μF FEC15-24S12 18 – 36 VDC 12 VDC 0mA 1250mA 50mVp-p 20mA 772mA 85 1035 μF FEC15-24S15 18 – 36 VDC 15 VDC 10mA 1000mA 50mVp-p 15mA 772mA 85 705μF FEC15-24D05 18 – 36 VDC ± 5 VDC 0mA ± 1500mA 75mVp-p 15mA 781mA 84 ± 1020 μF FEC15-24D12 18 – 36 VDC ± 12 VDC 0mA ± 625mA 75mVp-p 25mA 762mA 86 ± 495μF FEC15-24D15 18 – 36 VDC ± 15 VDC 0mA ± 500mA 75mVp-p 25mA 762mA 86 ± 165 μF FEC15-48S33 36 – 75 VDC 3.3 VDC 0mA 4000mA 50mVp-p 10mA 357mA 81 10200μF FEC15-48S05 36 – 75 VDC 5 VDC 0mA 3000mA 50mVp-p 20mA 396mA 83 7050 μF FEC15-48S12 36 – 75 VDC 12 VDC 10mA 1250mA 50mVp-p 15mA 377mA 87 1035μF FEC15-48S15 36 – 75 VDC 15 VDC 0mA 1000mA 50mVp-p 15mA 381mA 86 705 μF FEC15-48D05 36 – 75 VDC ± 5 VDC 0mA ± 1500mA 75mVp-p 10mA 386mA 85 ± 1020μF FEC15-48D12 36 – 75 VDC ± 12 VDC 0mA ± 625mA 75mVp-p 15mA 372mA 88 ± 495 μF FEC15-48D15 36 – 75 VDC ± 15 VDC 0mA ± 500mA 75mVp-p 15mA 377mA 87 ± 165μF Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Maximum value at nominal input voltage and full load 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 7. The ON/OFF control pin voltage is referenced to -Vin. To order positive logic ON-OFF control add the suffix-P (Ex: FEC15-24S05-P) To order negative logic ON-OFF control add the suffix-N (Ex: FEC15-24S05-N) 8. Heat sink is optional and P/N: 7G-0020C-F. 9. The FEC15 series can meet EN55022 Class A with parallel an external capacitor to the input pins. 10. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. FEC15-48S05 Derating Curve With Heatsink (Note 8 ) 100 120 -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE(℃) OUTPUT POWER(%) FEC15-48S05 Derating Curve 100 120 - 4 0 - 2 00 2 04 06 08 0 1 0 0 1 2 0 AMBIENT TEMPERATURE( ℃) OUTPUT POWER (%) FEC15-48S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) EFFICIENCY(%) FEC15-48S05 Efficiency VS Input Voltage 36 40 44 48 52 56 60 64 68 72 INPUT VOLTAGE (V) EFFICIENCY(%)

Page 3 of 3 Issued Date：2008/05/21 1.5 2 2.5 3 0.5 1 OUTPUT LOAD (A) EFFICIENCY (%) FEC15-48S05 Efficiency VS Output load Recommended Filter for EN55022 Class B Compliance The components used in the above figure, together with the manufacturers’ part numbers for these components, are as follows: C1 C2 C3 C4 L1 FEC15-12xxx 4.7μF /50V

1812 MLCC N/A 1000pF/2KV

325μH Common Choke PMT-050 FEC15-24xxx 3.3μF /50V 325μH Common Choke PMT-050 FEC15-48xxx 2.2μF /100V

1812 MLCC

2.2μF /100V 325μH Common Choke PMT-050 Recommended EN55022 Class B Filter Circuit Layout PIN CONNECTION PIN SINGLE DUAL 1 + INPUT + INPUT 2 - INPUT - INPUT 3 + OUTPUT + OUTPUT

4 NO PIN COMMON

6 CTRL (Option) CTRL (Option)

1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1)