FE3-120B OMEGA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
55To Order, Call or Shop Online at omega.com SM
20 Mil FEP
and metal overbraid* extruded jacket Continuous label marker tape Nickel-chromium resistance wire Contact module point alternately located Main-conductor bus wires are 12(AWG), multi-stranded, nickel-plated copper Fluorocarbon film FEP extruded insulation medium TemperaTure COnSTanT waTTage heaTing Cable U Continuous exposure rating up to 204°C (400°F) U low watt density U parallel resistance heater U Cut-to-length at the Job Site U Constant watt density U moisture and Chemical resistance U low Cost U metal Overbraid SpeCiFiCaTiOnS wattage: 3, 5, 8, and 12 Watts/ft. Outside dimension: Nominal 7.62 x 5.08 mm (0.30 x 0.20") maximum Short Term exposure Temperature: (De-energized) 232°C (450°F) dielectric Strength: In excess of 2500V apprOValS Factory Mutual Class l, Division II, Groups B, C, D; Class ll, Division II, Groups E, F, G; and Class lll * Cable circuit module length in feet. When ordering please allow a minimum of 1 module length extra for terminations. ** Maximum circuit lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 148°C (300°F). NOTE: Price per foot. When ordering, specify desired length in feet [7.6 m (25') minimum]. To complete your system the following accessories are recommended: (1) Termination kits for FE cable, (2) Control options—a complete selection of controllers and thermostats are available online. 8 W/pt., 120 Vac. Fe Series
appliCaTiOnS
OMEGALUX® FE cable is a low-watt density electrical resistance heater. It is designed for freeze protection and midrange process temperature control and maintenance applications in lines periodically purged with 150 psig steam. To Order module* maximum** watts/ft. Volts length (ft) length (ft) model no. 3 120 2 360 Fe3-120b 3 240 4 720 Fe3-240b 5 120 2 275 Fe5-120b 5 240 3 550 Fe5-240b 8 120 2 220 Fe8-120b 8 208 4 381 Fe8-208b 8 240 4 440 Fe8-240b 8 277 4 508 Fe8-277b 8 480 6 880 Fe8-480b 12 120 2 180 Fe12-120b 12 208 4 312 Fe12-208b 12 240 2 360 Fe12-240b 12 277 4 416 Fe12-277b The FE cable heating element is tension wrapped and covered with a fluorocarbon film and enclosed in a minimum 20 mil FEP abrasion resistant extruded jacket. This tough outer cover provides moisture and dielectric protection as well as resistance to abrasion. A tinned copper overbraid provides additional protection and electrical ground return path.