FD0200YR ETC1 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • Silicon bi-directional trigger device intended for use in thyristor (SCR and TRIAC) trigger circuits, energy saving lighting circuits and other switching functions. SPECIAL FEATURES:
  • Low breakover current.
  • Excellent symmetry.
  • Very low leakage current. BREAKOVER VOLTAGE 32 V ON-STATE CURRENT

2.0 Amps

Electrical Characteristics at Tamb = 25 ºC Breakover Voltage * Breakover Voltage Symmetry Dynamic breakover voltage * Output Voltage * Breakover Current * Rise Time * Leakage Current * VBO VBO+ - -VBO- ΔV± VO IBO tr IB IBO, C = 22nF (see Figure 1) IBO, C = 22nF (see Figure 1) ΔI = [IBO to IF = 10 mA] (see Figure 1) (see Figure 3) C = 22 nF (see Figure 4) V B = 0.5 VBO max (see Figure 1) V V V V µA µs µA PARAMETER CONDITIONS Min. Typ. Max. Unit 1.5 Thermal Resistance Junction to Ambient Junction to leads R th (j-a) R th (j-l) 400 150 ºC/W ºC/W PARAMETER CONDITIONS Min. Typ. Max. Unit Absolute Maximum Ratings, according to IEC publication No. 134 Total Power Dissipation Repetitive peak on-state current Storage Temperature Range Operating Junction Temperature Ptot ITRM Tstg Tj Ta = 65 ºC tp = 20 µs, f = 100 Hz -40 -40 150 +125 +125 mW A ºC ºC PARAMETER CONDITIONS Min. Typ. Max. Unit MARKING CODE P1 Connected in parallel with the devices. Mounting instructions 1. Min. distance from body to soldering point, 4 mm. 2. Max. solder temperature, 250 °C. 3. Max. soldering time, 3.5 sec. 4. Do not bend lead at a point closer than 2 mm. to the body . Dimensions in mm. DO-35 Glass Axial Package 3.60 ± 0.55 54.4 ± 0.55 FD0200YR DIAC IP Peak Current * see Figure 3 (Gate) ± 3 A0.3 * Applicable to both forward and reverse directions.

FIGURE 1: Current-V oltage Characteristics +VBO -VBO +IBO -IBO ΔV+ ΔV - t t FIGURE 2 +IF 10mA IBO IB VBO 0.5VBO -V +V -IF ΔV FIGURE 3: T est Circuit for Output V oltage. D.U.T . 50Hz

220 VAC

10KΩ 500KΩ R = 20Ω0.1 µF FIGURE 4: T est circuit see Figure 3. Adjust R for Ip = 0.5 A t r Ip 90 % 10 % FD0200YR DIAC Feb - 03 PART NUMBER INFORMATION FAGOR DIAC CURRENT CASE VOLTAGE SENSITIVITY F D 02 00 Y R 00 FORMING AM PACKAGING