DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

DESCRIPTION

The Relay Function Module 2 is a member of the Linx pre-certified OEM product line. The modules have been tested for FCC, Industry Canada, and European CE (433MHz only) compliance and can be quickly customized to meet a specific OEM’s labeling requirements. This greatly reduces the time and expense of bringing an RF-based product to market. The Relay Function Modules provide four latched or momentary relay outputs that are capable of switching external AC or DC powered loads of up to 7 amps. The Relay Modules incorporate a Linx LR Series receiver. Selectable addressing provides security and allows the creation of 256 distinct transmitter / receiver relationships to avoid unwanted interaction when multiple systems are in use. When paired with a compatible Holtek based Linx OEM Handheld transmitter or transmitter module, the Relay Function Module 2 serves as a reliable wireless switching device at distances of up to 750 feet. 4-POSITION RELAY FUNCTION MODULE 2 DATA GUIDE 1.770" 4.700" 5.775" 3.100" 3.200" APPLICATIONS INCLUDE nGeneral Remote Control nMotor Control nGarage / Gate Openers nLighting Control nCall Systems nHome / Industrial Automation nWire Elimination Revised 1/14/11 Figure 1: Package Dimensions WIRELESS MADE SIMPLE® nFCC, Canada, and CE pre-tested nWide operational voltage (7 to 30VDC) nDual power inputs n4 long-life relays, switch AC or DC nFlange-mount case nQuick-attach heavy-duty device connectors n256 unique addresses nCan be cosmetically customized for OEM applications

FEATURES

PART # DESCRIPTION FCTN-RLY4-315-2 Relay Function Module 2 - 315MHz FCTN-RLY4-418-2 Relay Function Module 2 - 418MHz FCTN-RLY4-433-2 Relay Function Module 2 - 433MHz

ORDERING INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment. COMPLIANCE REQUIREMENTS The FCTN-RLY4-*-2 has been tested by an FCC-approved facility and been found to comply with all applicable FCC and Industry Canada requirements as of the date of this document. A Declaration of Conformity (DoC) is on file. It is the user’s responsibility to consult the FCC or other testing body to determine if any additional testing may be required on the user’s completed product. In products where no additional testing is required, further labeling of the unit is not needed unless the module will be placed inside another housing. It is, however, necessary to include the following statement in the end product’s instruction manual or insert card. Place the above statement in the instruction manual or insert card. LABELING REQUIREMENTS In cases where the FCTN-RLY4-*-2 module is incorporated inside a product and its standard labeling is not visible, the end product must be labeled as shown below.  The following label shall be affixed in a conspicuous location to any device self-certified under the FCC’s Declaration of Conformity process:  When the device is constructed in two or more sections connected by wires and marketed together, the label is required to be affixed only to the main control unit.  The label shall not be a stick-on paper label. The label shall be “permanently affixed” to the device (meaning the label is etched, engraved, stamped, silk- screened, indelibly printed on a permanently attached part of the device, or on a nameplate fastened to the equipment by welding, riveting, or a permanent adhesive). The label must be designed to last the expected lifetime of the equipment in the environment in which the equipment may be operated and may not be readily detachable. Trade Name Model Number

Figure 9: FCTN-RLY4-***-2 Schematic Diagram GND GND VCC3 ANT1 ANT-xxx-PW-RA NC 1 NC 2 NC 3 GND4 VCC5 PDN6 RSSI 7 DATA8NC9 NC10 NC11 NC12 NC13 NC14 GND15 ANT16 RX1 RXM-xxx-LR SW-DIP-4 GND 100k 100k 100k VCC3 GND SW-DIP-8 VPP GND VCC31 NS RE4 RE3 RE2 RE1 GND VCC3VCC1 RA5/OSC1 2 RA4/AN3/OSC2 3 RA3/MCLR 4 RC5 5 RC4 6 RC3/AN7 7 RC6/AN8 8 RC7/AN99 RB7/TX10RB611 RB5/AN11/RX12 RB4/AN1013 RC2/AN614 RC1/AN515 RC0/AN416 RA2/AN217 RA1/AN1/CLK18 RA0/AN0/DAT19 GND20 CHP-PIC-FCTN-RLY LM1 LM2 LM3 LM4 VPP GND GND VCC VCCVCC VCC RE4 RE3 RE2 RE1 10 11 JP1 USL-5HB2-10P RE1 RE2 RE3 RE4 1I 1 2I 2 3I 3 4I 4 5I 5 6I 6 7I 7 GND 8COM9 7O10 6O11 5O12 4O13 3O14 2O15 1O16 MC1413BDR2G VCC VCC12 GND GND VCC12 VCC12 VCC 0.01uF GND GND 1N4002 V- SW V- PWRJACK VCC3 GND GND IN GND EN OUT BYP MIC5205-3.3YM5 4.7uF GND NS GND BOOT 1 NC 2 NC 3 FB 4EN5 GND6 VIN7 SW8 GND LM22674 100uH 0.01uF 10uF GND 1uF 22uF

LINX TECHNOLOGIES, INC.

159 ORT LANE

MERLIN, OR 97532 PHONE: (541) 471-6256 FAX: (541) 471-6251 www.linxtechnologies.com U.S. CORPORATE HEADQUARTERS WIRELESS MADE SIMPLE® Linx Technologies is continually striving to improve the quality and function of its products. For this reason, we reserve the right to make changes to our products without notice. The information contained in this Data Guide is believed to be accurate as of the time of publication. Specifications are based on representative lot samples. Values may vary from lot-to-lot and are not guaranteed. "Typical" parameters can and do vary over lots and application. Linx Technologies makes no guarantee, warranty, or representation regarding the suitability of any product for use in any specific application. It is the customer's responsibility to verify the suitability of the part for the intended application. NO LINX PRODUCT IS INTENDED FOR USE IN ANY APPLICATION WHERE THE SAFETY OF LIFE OR PROPERTY IS AT RISK. Linx Technologies DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL LINX TECHNOLOGIES BE LIABLE FOR ANY OF CUSTOMER'S INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY FROM ANY DEFECTIVE OR NON-CONFORMING PRODUCTS OR FOR ANY OTHER BREACH OF CONTRACT BY LINX TECHNOLOGIES. The limitations on Linx Technologies' liability are applicable to any and all claims or theories of recovery asserted by Customer, including, without limitation, breach of contract, breach of warranty, strict liability, or negligence. Customer assumes all liability (including, without limitation, liability for injury to person or property, economic loss, or business interruption) for all claims, including claims from third parties, arising from the use of the Products. The Customer will indemnify, defend, protect, and hold harmless Linx Technologies and its officers, employees, subsidiaries, affiliates, distributors, and representatives from and against all claims, damages, actions, suits, proceedings, demands, assessments, adjustments, costs, and expenses incurred by Linx Technologies as a result of or arising from any Products sold by Linx Technologies to Customer. Under no conditions will Linx Technologies be responsible for losses arising from the use or failure of the device in any application, other than the repair, replacement, or refund limited to the original product purchase price. Devices described in this publication may contain proprietary, patented, or copyrighted techniques, components, or materials. Under no circumstances shall any user be conveyed any license or right to the use or ownership of such items. Disclaimer © 2011 by Linx Technologies, Inc. The stylized Linx logo, Linx, “Wireless Made Simple”, CipherLinx, and the stylized CL logo are the trademarks of Linx Technologies, Inc. Printed in U.S.A.