FCR SEI | Alldatasheet
Document overview
- Manufacturer or author: LCLOUD
- PDF pages: 4
Technical content
Rev Date: 11/18/2020 1 www.seielect.com This specification may be changed at any time without prior notice. marketing@seielect.com Please confirm technical specifications before you order and/or use. FCR Series Trimmable Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions Features:
- YAG laser user-trimmable in circuit
- Available in a variety of pre-trim tolerance ranges
- TCR of ± 200 ppm/ºC
- RoHS compliant and halogen free
- REACH compliant Electrical Specifications Performance Characteristics Mechanical Specifications Test Test Results (JIS C 5202) Load Life in Moisture ± 3% Temperature Cycle ± 1% Load Life ± 3% Resistance to Solder Heat ± 1% Terminal Adhesion ± 1% Short Time Overload ± 2% Operating Temperature Range: -55ºC to +125ºC FCR0402 0.063 50 100 FCR0603 0.1 50 100 FCR0805 0.125 100 200 FCR1206 0.25 200 400 FCR1210 0.33 200 400 FCR2010 0.75 200 400 FCR2512 1 200 400 (1) Lesser of or maximum working voltage. 10 - 1M± 200 Type/Code Power Rating (W) @ 70ºC Maximum Working Voltage (V)(1) Maximum Overload Voltage (V) TCR (ppm/ºC) Ohmic Range (Ω) √ P*R FCR0805 Type/Code FCR1206 FCR1210 FCR0402 FCR0603 FCR2010 UnitW Body Width H Body Height a Top Termination b Bottom Termination L Body Length
Rev Date: 11/18/2020 2 www.seielect.com This specification may be changed at any time without prior notice. marketing@seielect.com Please confirm technical specifications before you order and/or use. FCR Series Trimmable Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions Power Derating Curve: Trimming Ration Curve: Recommended Solder Profile This information is intended as a reference for solder profiles for Stackpole resistive components. These profiles should be compatible with most soldering processes. These are only recommendations. Actual numbers will depend on board density, geometry, packages used, etc., especially those cells labeled with “*”. 100% Matte Tin / RoHS Compliant Terminations Soldering iron recommended temperatures: 330°C to 350°C with minimum duration. Maximum number of reflow cycles: 3. Wave Soldering Description Maximum Recommended Minimum Preheat Time 80 seconds 70 seconds 60 seconds Temperature Diff. 140°C 120°C 100°C Solder Temp. 260°C 250°C 240°C Dwell Time at Max. 10 seconds 5 seconds * Ramp DN (°C/sec) N/A N/A N/A Temperature Diff. = Defference between final preheat stage and soldering stage. Convection IR Reflow Description Maximum Recommended Minimum Ramp Up (°C/sec) 3°C/sec 2°C/sec * Dwell Time > 217°C 150 seconds 90 seconds 60 seconds Solder Temp. 260°C 245°C * Dwell Time at Max. 30 seconds 15 seconds 10 seconds Ramp DN (°C/sec) 6°C/sec 3°C/sec *
Rev Date: 11/18/2020 3 www.seielect.com This specification may be changed at any time without prior notice. marketing@seielect.com Please confirm technical specifications before you order and/or use. FCR Series Trimmable Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the v arious regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictions on Hazardous Substance s” (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 201 1/65/EU of the European Parliament a s amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. “Conflict Metals” Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the “conflict region” of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to “REACH” We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, “The Registration, Evaluation, Authorization and Restriction of Chemicals”, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. RoHS Compliance Status FCR Trimmable Thick Film Surface Mount Chip Resistor SMD YES(1) 100% Matte Sn over Ni Jan-04 04/01 Note (1): RoHS Compliant by means of exemption 7c-I. Standard Product Series
Description
Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) Recommended Lead Free Resistor Reflow Profile
Rev Date: 11/18/2020 4 www.seielect.com This specification may be changed at any time without prior notice. marketing@seielect.com Please confirm technical specifications before you order and/or use. FCR Series Trimmable Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions How to Order Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. 1 2 3 4 5 6 7 8 9 10 11 12 13 F C R 0 8 0 5 K T 4 7 K 0 Resistance Value FCR Trimmable Code W Code Tol Value Code Description Size Quantity 0402 0.063 K ±10 0402 10000 0603 0.1 L ±15 0603, 0805 0805 0.125 M ±20 1206, 1210 1206 0.25 N ±30 7" Reel - Plastic Tape 2010, 2512 4000 10 ohm = 10R0 1210 0.33 S 0 ~ -5% 10 Kohm = 10K0 2010 0.75 U 0 ~ -10% 1 Mohm = 1M00 2512 1 V 0 ~ -20% W 0 ~ -30% Size 50007" Reel - Paper TapeT Tolerance Packaging Four characters with the multiplier used as the decimal holder. E24 Product Series