HPF24S6 GAMEWELL-FCI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
UL Listed NAC synchronization using System Sensor, Cooper-Wheelock or Gentex (Commander Series) appliances. Cascade up to ten (10) power supplies (four (4) power supplies with Gentex) with strobe timing maintained. Operates as a sync follower or a sync generator (default). Contains two (2), fully -isolated input/control circuits energized from FACP notification appliance circuit (NAC expander mode) or jumpered permanently on (stand-alone mode). Configured to internally house addressable SLC control module for alarm activation. Four (4) Class B (Style Y) or four (4), Class A (Style Z) (with ZNAC-4 Module) notification appliance circuits. 6.0A or 8.0A (depending on model) full load output (3.0A maximum per circuit) in NAC expander mode (UL Standard 864). 4.0A or 6.0A continuous output in stand-alone mode (UL Standard 1481). HFP24S6/8 dh1061.jpg An ISO 9000-2000 Company SIGNALING UOXX.S6677 UTRZ.S6677 7315-1637:102
12 Clintonville Road, Northford, CT 06472-1610 USA Tel: (203) 484-7161 Fax: (203) 484-7118
CS-60062 Rev. A1 page 2 of 2 www.gamewell-fci.com Features (Continued) In stand-alone mode, output power circuits configured as resettable, (using the FACP reset switch), non-resettable, or a combination of both. Fully regulated and filtered power output (optimal for powering four-wire smoke detectors, annunciators and other system peripherals requiring regulated/filtered power). Power-limiting technology meets UL power-limiting requirements. Normally-closed trouble relay. Fully supervised power supply, battery and notification appliance circuits. Selectable earth fault detection. AC trouble report selectable for immediate or up to 8 hour delay. Compatible with any UL 864 fire alarm control which uses an industry standard reverse polarity notification circuit (including unfiltered and unregulated bell power). Requires input trigger voltage of 9.0 -32 VDC. Self-contained in compact, lockable cabinet Includes an integral battery charger capable of charging up to 18 AH batteries. The cabinet has the capacity of housing 7.0 AH batteries. Battery charger may be disabled via DIP (Dual In-Line Package) switch for applications requiring larger batteries. Fixed, clamp-type terminal blocks accommodate up to 12 AWG (3.1 mm 2) wire. Specifications Primary (AC) Power HPF24S6: 120 VAC 60 Hz, 3.2A maximum HPF24S8: 120 VAC 60 Hz, 3.2A maximum Wire size: minimum 14 AWG (2.0 mm²) with 600V insulation Control Input Circuit Input Voltage: 9.0 to 32 VDC Input Current: 2.0 mA (16 - 32 V) per input 1.0 mA (9 - 16 V) Trouble Contact Rating 5.0A at 24 VDC Auxiliary Power Output Specific Application Power - 500 mA maximum Specifications (Continued) Output Circuits +24 VDC filtered, regulated 3.0A maximum for any one circuit 4.0A maximum total continuous current for all outputs (Stand-alone mode) for the HPF24S6 and 6A for the HPF24S8 6A or 8A, depending on the model, maximum total short-term current for all outputs (NAC Expander mode). Secondary Power (Battery) Charging Circuit Supports lead-acid batteries only Float Charge Voltage: 27.6 VDC Maximum Charge Current: 1.5A Maximum Battery Capacity: 18 AH
Ordering Information
HPF24S6 Remote charger 6A power supply (120 VAC). Includes the main printed circuit board, transformers, red enclosure, and installation instructions. HPF24S8 Remote charger 8A power supply (120 VAC). Includes the main printed circuit board, transformers, red enclosure, and installation instructions. FCPS-24S6RB Replacement mother board. ZNAC-4 - Class A (Style Z) NAC option module BAT-1270 - Battery, 12 volt, 7.0 AH (two required).