FCM31PT CHENMKO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FEATURES
- For surface mounted applications * Low profile package * Built-in strain relief * Fast recovery times for high efficiency * Metallurgically bonded construction * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * High temperature soldering guaranteed : 260oC/10 seconds at terminals Case: JEDEC SMC molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band Weight: 0.003 ounces, 0.093 gram MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. FCM31PT THRU FCM37PT SMC SMCDimensions in inches and (millimeters) CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 3.0 Amperes ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) NOTES : CHARACTERISTICS SYMBOL UNITS 1.3 5.0@ TA = 25oC 150 250 500 uAmps 50 uAmps nSec VoltsMaximum Instantaneous Forward Voltage at 3.0 A DC Maximum DC Reverse Current at Rated DC Blocking Voltage MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TL = 100oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO CJ VF Maximum Reverse Recovery Time (Note 2) trr IR TJ, TSTG IFSM UNITS Volts Volts Volts Amps FCM31PT 3.0 100 -65 to +150 Amps pF oC FCM33PT 200 140 200 FCM34PT 400 280 400 FCM35PT 600 420 600 FCM37PT 1000 700 1000 FCM36PT 800 560 800 FCM32PT 100 100 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts 2. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A @ TA = 100oC 0.245(6.22) 0.220(5.59) 0.103(2.62) 0.079(2.06) 0.060(1.52) 0.030(0.76) 0.012(0.305) 0.008(0.203)(max) 0.006(0.152) 0.280(7.11) 0.260(6.60) 0.125(3.17) 0.115(2.92) 0.320(8.13) 0.305(7.75) 2002-5 (1) (2) FCM31PT FCM33PT FCM34PT FCM35PT FCM37PTFCM36PTFCM32PT
RATING CHARACTERISTIC CURVES ( FCM31PT THRU FCM37PT ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, (A) LEAD TEMPERATURE, ( oC ) NUMBER OF CYCLES AT 60 Hz 3.0 1.5 0.5 1.0 2.0 2.5 0 25 50 75 100 125 150 175 Single Half Wave 60HZ Resistive or Inductive Load FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, ( A ) 1 2 5 10 20 50 100 140 120 100 8.3ms Single Half Sine-Wave (JEDEC Method) FIG. 3 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT INSTANTANEOUS REVERSE CURRENT, (uA) PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) 0 20 40 60 80 100 120 140 .01 1.0 100 TJ =25oC TJ =100oC FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD VOLTAGE, ( V ) INSTANTANEOUS FORWARD CURRENT, ( A ) 3.0 1.0 0.3 0.1 .03 .01 Pulse Width = 300uS 1% Duty Cycle TJ =25oC FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, ( pF ) REVERSE VOLTAGE, ( V ) TJ =25oC 200 100 .1 .2 .4 1.0 2 4 10 20 40 100