FCD488-010 JDSU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Key Features • Compact – optics and electronics integrated in one housing  Low heat load – no heat sink required  Good efficiency – requires only small 5 V power supply  Fiber-based architecture – enables fiber-delivered version  High reliability – due to telecom-style packaging technology The FCD488 is a continuous wave 10, 20 and 25 mW 488 nm solid-state laser, featuring fiber-based architecture. The package contains both the optical elements of the laser and the control electronics, allowing full control and diagnostics of the laser system through an analog interface and RS232 interface. Powered by an external 5 V DC power supply, the laser is cost-efficient, reliable, and compact, with excellent electrical and thermal efficiency. It has a low heat load, so the laser operates without a heat sink. Based on JDSU’s Frequency Converted Diode technology, the FCD488 enables consistent high volume laser manufacturing, with a “package, splice, and test” design. The components are put in hermetic packaging. The fibers are spliced together. And the laser is tested. The FCD488 is available in two versions: a free space and a fiber-delivered version with the same characteristics and reliability as the free space laser.

Applications

 Biotechnology  Semiconductor instrumentation  General instrumentation Continuous Wave 488 nm Solid-State Laser FCD488 NORTH AMERICA : 800 498-JDSU (5378) WEBSITE : www.jdsu.comWORLDWIDE : +800 5378-JDSU

CONTINUOUS WAVE 488 NM SOLID-STATE LASER Dimensions Diagram (Specifications in mm unless otherwise noted.) 5.0 125 7.5 12.7 ROM LENGTH 55.0 1.5M HARNESS LENGTH 115.04X 4.0 THRU COMMUNICATION PORT 15-PIN D-SUB CONNECTOR 5V POWER SUPPLY LASER STATUS

2 LEDS

5.5 0 . 9 1 5 .71 8. 3 1 4 3 5 .5 TRO P NOI TA CINU M MOC Y LPPU S RE W OP V 5 ROTCENN OC B U S-D NI P-51 SUT AT S R E S AL S D E L 2 0 . 55 0 . 5 5 . 7 5 . 1 1 5 2 1 1. 0 1 0 . 5 1 1 X4 0 . 4 U R HT Free Space Fiber Delivered

CONTINUOUS WAVE 488 NM SOLID-STATE LASER Specifications Parameter FCD488-010 FCD488-020 FCD488-025 FCD488FC-010 FCD488FC-020 ree Space) (Free Space) (Free Space) (Fiber Delivered) (Fiber Delivered) Optical Wavelength 488 ± 2 nm Output power 10 mW 20 mW 25 mW 10 mW 20 mW Power stability (2 hour, 25±3 °C) after warm-up <2.0% Mode quality M2 <1.2 Beam diameter (1/e2 point) 0.7 mm ± 10% Beam divergence (full angle) <1.0 mrad Polarization ratio (E-vector is vertical) >100:1 Noise (rms, 20 Hz to 2 MHz) <0.5% Ellipticity <10% Pointing stability after warm-up <10 µrad/°C Static alignment Beam angle ± 2.5 mrad ± 2.5 mrad ± 2.5 mrad ± 50 mrad ± 50 mrad Environmental Base plate temperature Operating 10 to 45°C Non-operating 0 to 60°C Shock (11 ms duration) Operating 1 g Non-operating 25 g Vibration (sinusoidal, 5 to 500 Hz) Operating 0.3 g Non-operating 2 g Warm-up time <10 minutes Electrical requirements Operating voltage 5.0 ± 0.4 V DC Current required 4 A

Ordering Information

For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide, or via e-mail at customer.service@jdsu.com. Product Code Description FCD488-010 F CD continuous wave 10 mW 488 nm free space solid-state laser FCD488-020 F CD continuous wave 20 mW 488 nm free space solid-state laser FCD488-025 F CD continuous wave 25 mW 488 nm free space solid-state laser FCD488FC-010 FCD continuous wave 10 mW 488 nm fib er delivered solid-state laser FCD488FC-020 FCD continuous wave 20 mW 488 nm fib er delivered solid-state laser Sample: FCD488-010

CONTINUOUS WAVE 488 NM SOLID-STATE LASER NORTH AMERICA : 800 498-JDSU (5378) WEBSITE : www.jdsu.comWORLDWIDE : +800 5378-JDSU Compliance with Regulatory Requirements Warranty JDSU FCD488 solid-state lasers are warranted to be free of defects in materials and workmanship for twelve months from the date of shipment or 5,000 hours, whichever occurs first. The FCD488 laser system is an OEM version of a JDSU solid-state laser and as such only intended for integration into other equipment. These lasers do not comply with CDRH. The custom er is responsible for CDRH certification of the system incorporating the FCD488 laser system. The unit has been designed and tested to comply with the following standards: Electromagnetic radiated and line conducted emissions tested to standard EN 55022. Electromagnetic immunity tested to standard EN 61326 in compliance with IEC 601010-1 and IEC 60825-1. Product specifications and descriptions in this document subject to change without notice. © 2009 JDS Uniphase Corporation 301 49042 003 0309 FCD488.DS.CL.AE March 2009