FCA1206A105M-H3 CDE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Type FCA Acrylic Surface Mount Film Capacitors Acrylic Stacked Metallized Film Capacitors for Filtering and Noise Attenuation Type FCA acrylic film chips are non-inductive stacked metallized film capacitors which feature large capacitance values in standard surface mount case sizes. Highlights

  • Smallest film chips
  • No piezoelectric effect
  • Non-polarized, non-magnetic
  • Low ESR
  • 1.0 µF/10V in 1206 case Filtering • Decoupling • Noise Attenuation • Distortion Free Audio Type FCA acrylic film capacitors offer high capacitance values in standard surface mount case sizes. They excel in attenuating DC power bus noise, and as ripple filters in dc to dc power conversion circuits. As coupling capacitors in audio circuits, they yield distortion free sound and better high frequency filtering. The 1.0 µF 10 Vdc rating offers a film capacitor that is a direct replacement for tantalum “A” case capacitors. The nonpolar FCA capacitor has lower ESR and lower DCL than an equivalent tantalum capacitor, and in high frequency applications it takes a tantalum capacitor with ten times the capacitance to perform as well as the FCA capacitor. The capacitor is constructed of noninductive stacked layers of metallized acrylic resin film with lead free solder (Sn/Ag/Cu) plated copper alloy terminals. Specifications Capacitance Range: 0.10 µF to 1.0 µF Capacitance Tolerance: ±20% @ 1 kHz and +20 ºC Rated Voltage: 16 Vdc [1.0 µF in 1206 case, 10 Vdc] AC Voltage Rating: 12 Vrms Operating Temperature Range: –40 ºC to +85 ºC Dissipation Factor: 0.015 @ 1 kHz and +20 ºC Dielectric Strength: 175% of rated voltage for 5 seconds Insulation Resistance (IR): After 1 minute @10 Vdc; +20 ºC IR >1000 MΩ (C ≤0.33 µF) IR > 300 MΩ•µF (C >0.33 µF) Resistance to Soldering: The capacitor can withstand being heated in an oven at 235 ºC for 200 seconds Complies with the EU Directive 2 0 0 2 / 9 5 / E C r e q u i r e m e n t restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type FCA Acrylic Surface Mount Film Capacitors Specifications Moisture Resistance: After 500 hours with rated voltage applied at +40 ºC and 90 to 95% RH, the capacitor will meet the following limits: ∆C = +20/–3% of the initial measured value DF ≤2.25% (at 1 kHz) IR > 100MΩ (C ≤0.33 µF) IR > 30MΩ•µF(C > 0.33 µF) Dielectric Strength: Capacitor will withstand 130% of the rated voltage for 1 minute. Life Test: Apply 125% of the rated DC working voltage at 85 ºC for 1000 hours, and then stabilize them to +20 ºC. Capacitors will meet the following limits: C = +7%/–20% of the initial measured value DF ≤1.65% (at 1 kHz) IR > 300MΩ (C ≤0.33 µF) IR > 100MΩ•µF(C > 0.33 µF) Ratings Catalog Part Maximum Current Capacitance Number dv/dt 10kHz 20kHz 50kHz 100kHz 200kHz 500kHz 1MHz (µF) (V/µs) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms)

10 Vdc

16 Vdc

Part Number Case Inches Millmeters Suffix Code L W H S L W H S Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type FCA Acrylic Surface Mount Film Capacitors Temperature Characteristics Capacitance Change (Typical) Capacitance Change (%) -10 -60 -40 -20 0 20 40 60 80 100 Temperature (°C) Dissipation Factor (Typical) -60 -40 -20 0 20 40 60 80 100 Temperature (ºC) Insulation Resistance 1000 0.1 uF 0.33 uF 1.0 uF 100 -60 -40 -20 0 20 40 60 80 100 Temperature (ºC) Frequency Characteristics Capacitance Change Capacitance Change (%) 0.1 uF 0.33 uF 6 1.0 uF -10 1 10 100 1,000 10,000 Frequency (kHz) Dissipation Factor

10 DF (%)

Impedance (ohms) 0.1uF .33 uF 8 1.0 uF 1 10 100 1,000 10,000 Frequency (kHz) Impedance 10000.00 1000.00 100.00 10.00 1.00 0.1 uF .33 uF 1.0 uF 0.10 0.01 1 10 100 1,000 10,000 Frequency (kHz) Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type FCA Acrylic Surface Mount Film Capacitors Typical Applications Coupling Capacitor for Audio: + FCA _ + Sound Signal ESR vs. FrequencyTotal Harmonic Distortion Comparison0.08 Distortion (%)0.02 ESR (Ohms) 100 0.1 FCA MCLL Tantalum 0.01 Aluminum Electrolytic 0.1 µF @ 16 Vdc 0.06 10 Tantalum 0.1 µF @ 16 Vdc 0.04 1 FCA 0.1 µF @ 16 Vdc 1 10 100 1000 10000 0.47 µF 0.47 µF 0.47 µF Frequency (kHz) Using FCA capacitors in audio circuits can result in lower sound distortion. The low ESR, the absence of piezoelectric effects, and the non polar nature of the capacitor will eliminate sources of distortion in your audio circuits. PLL Circuit: Cellular phone, Blue Tooth, Data Communication Card Phase Lock Loop Lock-up time MLCC X7R Tantalum FCA (.33 µF) 0 1 2 3 4 5 6 Charge VCO Pump FCA FCA Filter MLCC X7R Tantalum FCA 0 1 2 3 4 5 6 Time (ms)Time (ms) FCA surface mount film capacitors have advantages over tantalum and ceramic capacitors in PLL circuits. There are no piezoelectric effects to create noise, they are not polarized, and they result in faster signal lock-up time. Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com• • • • • Type FCA Acrylic Surface Mount Film Capacitors Typical Applications Filtering Performance: Switching Power Supply

10 Vdc 200 kHz

Impedance (Ohms Capacitance Change (%) Oscilloscope In the above circuit, one 1 µF FCA capacitor results in the same ripple reduction performance as a 10 µF tantalum capacitor at 200 kHz. With a 1 µF tantalum capacitor in the circuit the measured ripple voltage was 70 mVpp, and with a 10 µF tantalum or a 1 µF FCA capacitor the ripple voltage was 8 mVpp. Impedance vs. Frequency Capacitance Change vs. Temperature Comparison 1000 30 ) 20 100 Tantalum 10 10 1.0 µF Tantalum 0 1.0 µF 1 MLCC -10 MLCC 1.0 µF FCA 0.1 X7R -20 Acrylic Film FCA 1.0 µF 1.0 µF 1.0 µF 0.01 -30 1 10 100 1000 10000 -60 -40 -20 0 20 40 60 80 100 Frequency (kHz) Temperature (°C) Type FCA capacitors have very low ESR and stable capacitance vs. temperature. Design Kits See the Capacitor Kits section at the end of this catalog for design Kits containing various ratings of FCA, FCN and FCP surface mount film capacitors as well as kits for alluminum electrolytic, polymer aluminum, and mica surface mount capacitors Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com