FC66150

FC66150 FCI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

Features

Fixed and Adjustable Voltage Versions Output Current up to 1.5A Low Dropout Voltage 350mV @ 1.5A Low Ground Current Accurate 1% Guaranteed Tolerance Extremely Fast Transient Response Reverse-battery Protection "Load Dump" Protection Zero-Current shutdown mode(5-pin versions) Error flag signals output out-of-regulation (5-pin versions) TYPICAL APPLICA TION CIRCUITS

5 V ± 5%

66150 - 3.3 3.3 V ± 1% @1.5A 47µF Figure 1. Fixed Voltage Version Figure 2. Adjustable Voltage Version

Pinout On all devices, the Tab is grounded. GM66150/ Three Terminal Pin 1 = Input, 2 = Ground, 3 = Output GM66151/ Five Terminal (Fixed Voltage Devices) Pin 1 = Enable, 2 = Input, 3 = Ground, 4 = Output, 5 = Flag GM66152/ Adjustable with ON/ OFF Control Pin 1 = Enable, 2 = Input, 3 = Ground, 4 = Output, 5 = Adjust GM66153/ Adjustable with Flag Pin 1 = Flag, 2 = Input, 3 = Ground, 4 = Output, 5 = Adjust MARKING INFORMATION & PIN CONFIGURATIONS (TOP VIEW)

ORDERING INFORMATION

Ordering Number Output V oltage TO-263-2 TO-263-2 TO-263-2 TO-263-2 TO-220 TO-220 TO-220 TO-220 TO-252 TO-223 TO-252 TO-252 TO-223 TO-252 TO-263-2 TO-263-2 TO-263-2 TO-263-2

50 Units/ Tube

80 Units/ Tube

2,500 Units/ Tape & Reel 2,500 Units/ Tape & Reel 2,500 Units/ Tape & Reel

800 Units/ Tape & Reel

800 Units/ Tape &Reel

66150-1.8TA3T 66150-1.5TA3T 66150-2.5TA3T 66150-3.0TA3T 66150-1.8TB3T 66150-1.5TB3T 66150-2.5TB3T 66150-3.0TB3T 66150-2.5TC3T 66150-3.0ST3T 66150-3.0TC3T 66150-2.5TC3R 66150-3.0ST3R 66150-3.0TC3R 66150-1.8TA3R 66150-1.5TA3R 66150-2.5TA3R 66150-3.0TA3R 1.8V 1.5V 2.5V 3.0V 2.5V 3.0V 2.5V 3.0V 2.5V 3.0V 3.0V 2.5V 3.0V 3.0V 1.8V 1.5V 1.8V 1.5V 66150 TO-220- 5 66151 VVAYWW V V,VVV = Output Voltage A = Assembly Location Y = Year W W = Weekly SOT-223 VIN VOUT GND 66150 VVAYWW TO-263-5(D PAK) 66151 VVAYWW TO-220- 5 6615X AYWW TO-263-5(D PAK) 6615X AYWW (For GM66152 and GM66153) FC66150~3 1.5A Ultra Low - Droupout Voltage Regulator

Ordering Number Output V oltage TO-263-2 TO-263-5 TO-263-5 TO-263-5 TO-263-5 TO-263-5 TO-263-5 TO-263-5 TO-263-2 TO-263-2 TO-220 TO-220-5 TO-220-5 TO-220-5 TO-220-5 TO-220-5 TO-220-5 TO-220-5 TO-220 TO-220 TO-263-2 TO-263-5 TO-263-5 TO-263-5 TO-263-5 TO-263-5 TO-263-5 TO-263-5 TO-263-2 TO-263-2 66150-3.3TA3T 66151-1.5TA5T 66151-1.8TA5T 66151-2.5TA5T 66151-3.0TA5T 66151-3.3TA5T 66151-5.0TA5T 66151-12TA5T 66150-5.0TA3T 66150-12TA3T 66150-3.3TB3T 66151-1.5TB5T 66151-1.8TB5T 66151-2.5TB5T 66151-3.0TB5T 66151-3.3TB5T 66151-5.0TB5T 66151-12TB5T 66150-5.0TB3T 66150-12TB3T 66150-3.3TA3R 66151-1.5TA5R 66151-1.8TA5R 66151-2.5TA5R 66151-3.0TA5R 66151-3.3TA5R 66151-5.0TA5R 66151-12TA5R 66150-5.0TA3R 66150-12TA3R 3.3V 1.5V 1.8V 2.5V 3.0V 3.3V 5.0V 12V 5.0V 12V 3.3V 1.5V 1.8V 2.5V 3.0V 3.3V 5.0V 12V 5.0V 12V 3.3V 1.5V 1.8V 2.5V 3.0V 3.3V 5.0V 12V 5.0V 12V 66150 66151 * For detail Ordering Number identification, please see last page. FC66150~3 1.5A Ultra Low - Droupout Voltage Regulator

Ordering Number Output V oltage Adj Adj Adj Adj Adj * For detail Ordering Number identification, please see last page. FC66150~3 1.5A Ultra Low - Droupout Voltage Regulator

PARAMETER SYMBOL VALUE UNIT Internally limited W Input Supply Voltage (Note 1) V IN -20 to +60 V Lead Temperature (Soldering, 5 sec) Storage Temperature Range TLEAD TSTG 260 -65 to +150 Power Dissipation PD ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL VALUE UNIT 26 V Operating junction Temperature Range T J -40 to +125 °C Maximum Operating Input Voltage VIN OPERATING RATINGS BLOCK DIAGRAM * Feedback network in fixed version only ** Adjustable version only IN FLAG EN 1.18V 1.24V Ref. 28V R1* R2* OUT GND ADJ** Thermal Shut-down O.V. ILimit FC66150~3 1.5A Ultra Low - Droupout Voltage Regulator

ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted)A Unless otherwise specified: T = 25°C; Bold values are guaranteed across the operating temperature range. J Adjustable versions are programmed to 5.0V. Parameter Conditions Min Typ Max Unit Line Regulation Load Regulation (Note 2, 6) Output Voltage change with Temperature Coef. (Note 6) Dropout Voltage Ground Current Ground Pin Current at Dropout IGNDDO Current Limit Output Voltage (Note2) I = 10 mA O V = V + 5V, 10mA I I IN OUT OUT FL DV/ DTOUT DV -1% (Note 3) =OUT I = 100mAO I = 750mAO I = 1.5AO I = 750mA, V = V + 1VO IN OUT I = 1.5AO 0.06 0.20 220 350 2.0 2.1 0.5 1.0 100 200 600 3.5 ppm/°C mV mA A V = 0.5V less than specified V , I = 10mAIN OUT OUT V ,= 0V (Note 4)OUT mA Output Noise Voltage e , (10Hz to 100Hz)n I = 100mAO Reference Voltage Reference Voltage C = 10µFL C = 33 L µF (Note 8) 400 260 1.240 1.277 µV (rms) V V V Reference GM66152 1.228 1.215 1.252 1.265 1.203 Adjust Pin Bias Current 40 nA80 120 Reference Voltage change with Temperature Coef. Adjust Pin Bias Current change with Temperature Output Leakage Current Output Low Voltage Upper Treshold Voltage Lower Treshold Voltage Hysteresis Input Logic Voltage Low (OFF) High (ON) (Note 7) 20 0.1 0.01 220 2.4 ppm/°C nA/°C Flag Output (Error Comparator) GM66151/ GM66153 V = 26VOH Device set for 5V, V = 4.5VIN I = 250OL µA Device set for 5V(Note 9) Device set for 5V(Note 9) Device set for 5V(Note 9) 300 400 µA mV 140 mV mV V mV Enable Input GM66151 / GM66152 0.8 Enable Pin Input Current 100V = 26VEN 600 750 V = 0.8VEN 2.5 5.0 µA µA Regulator Output Current In Shutdown 10(Note10) 500 10mA I I ,(V + 1V) V 26V O FL OUT IN I = 10mA, (O V + 1V) V 26V OUT IN µA FC66150~3 1.5A Ultra Low - Droupout Voltage Regulator

ELECTRICAL CHARACTERISTICS (continued) Note 1: Maximum positive supply voltage of 60V must be of limited duration (<100msec) and duty cycle ( 1%). The maximum continuous supply voltage is 26V. Note 2: Full Load current (I ) is defined as 1.5A for the GM66150 series.FL Note 3: Dropout voltage is defined as the input-to-output differential when the output voltage drops to 99% of its nominal value with V + 1V applied to VOUT IN Note 4: V = V (nominal) + 1V. For example, use V = 4.3V for a 3.3V regulator or use 6V for a 5V regulator. Employ pulse-testing IN OUT IN procedures to minimize temperature rise. Note 5: Ground pin current is the regulator quiescent current. The total current drawn from the source is the sum of the load current plus the ground pin current. Note 6: Output voltage temperature coefficient is defined as the worst case voltage change divided by the total temperature range. Note 7: Thermal regulation is defined as the change in output voltage at a time T after a change in power dissipation is applied, excluding load or line regulation effects. Specifications are for a 200mA load pulse at V = 20V (a 4W pulse) for T = 10ms.IN Note 8: V V (V -1V), 2.3V V 26V, 10mA < I I , T T .REF OUT IN IN L FL J J MAX Note 9: Comparator thresholds are expressed in terms of a voltage differential at the Adjust terminal below the nominal reference voltage measured at 6V input. To express these thresholds in terms of output voltage change, multiply by the error amplifier gain = V / V = (R1 + R2)/ R2. For example, at a programmed output voltage of 5V, the Error output is guaranteed to goOUT REF low when the output drops by 95 mV x 5V/1.240 V = 384 mV. Thresholds remain constant as a percent of V as V is OUT OUT varied, with the dropout warning occurring at typically 5% below nominal, 7.7% guaranteed. Note 10: V 0.8V and V 26V, V = 0.EN IN OUT Note 11: When used in dual supply systems where the regulator load is returned to a negative supply, the output voltage must be diode clamped to ground. FC66150~3 1.5A Ultra Low - Droupout Voltage Regulator

APPLICATION INFORMATION

The 66150 series is high performance with low- dropout voltage regulators, suitable for all moderate to high-current voltage regulator applications. Their 350mV dropout voltage at full load makes them espe- cially valuable in battery powered systems and as high efficiency noise filters in "post-regulator" applications. Unlike older NPN-pass transistor designs, for which where the minimum dropout voltage is limited by the base-emitter voltage drop and collector-emitter satura- tion voltage, dropout performance of the PNP output of these devices is limited merely by the low V satura-CE tion voltage. A trade-off for the low dropout voltage is a varying base drive requirement. But, PNP process reduces this drive requirement to merely 1% of the load current. The 66150 series of regulators is fully protected from damage due to fault conditions. Current limiting is provided. This limiting is linear, and output current un- der overload conditions is constant. Thermal shutdown disables the device when the die temperature exceeds the 125°C maximum safe operating temperature. Transient protection allows device (and load) survival even when the input voltage spikes between -20V and +60V. When the input voltage exceeds about 35V to 40V, the overvoltage sensor temporarily disables the regulator. The output structure of these regulators al- lows voltages in excess of the desired output voltage to be applied without reverse current flow. 66151 and 66152 versions offer a logic level ON/OFF control: when disabled, the devices draw nearly zero current. An additional feature of this regulator family is a com- mon pinout: a design's current requirement may change up or down yet use the same board layout, as all of these regulators have identical pinouts. VIN IN OUT GND VOUT Figure 10. Linear regulators require only two ated heat sink without compromising performance.

TO-220P ACKAGE OUTLINE DIMENSIONS TO-220-5 PACKAGE OUTLINE DIMENSIONS 9.90 ± 0.20 3.60 ± 0.20 1.50 DP0.20 13.08 ± 0.20 9.20 ± 0.20 3.70 ± 0.20 1.30 2.80 ± 0.10 15.90 ± 0.20 18.95 MAX10.08 ± 0.30 1.52 ± 0.10 0.80 ± 0.10

2.54 TYP

(2.54 ± 0.20) 0.50 2.40 ± 0.20 Unit: mm 1.30 ± 0.10 4.50 ± 0.20 8.70 1.70 4.60 1.46 1.00 3.00 45° +0.1 -0.05 +0.1 -0.05 8.0 7.0 7.0 0.9 3-R0.2 10.00 ± 0.20 8.40 1.27 ± 0.10 2 - R 0.3 9.90 ± 0.20 1.50 DP0.20 13.08 ± 0.20 9.20 ± 0.20 3.70 ± 0.20 1.30 2.80 ± 0.10 15.90 ± 0.20

28.78 MAX

0.50 2.40 ± 0.20 Unit: mm 1.30 ± 0.10 4.50 ± 0.20 8.70 1.70 4.60 +0.1 -0.05 +0.1 -0.05 8.0 ± 0.20 7.0 7.0 ± 0.20 3-R0.2 10.00 ± 0.20 8.40 2 - R 0.3 3.60 ± 0.20 1.2 1.7(TYP) 5-0.8 ± 0.10 9.97 ± 0.20 9.20 ± 0.20 FC66150~3 1.5A Ultra Low - Droupout Voltage Regulator

TO-263-5 P ACKAGE OUTLINE DIMENSIONS Pad Layout 11.5 9 3.8 1.07 Units: mm 17.5 1.7 9.90 15' 0.40 1.50 DP0.20 9.20 4.90 15.3

0.801.70 TYP

(1.70 ± 0.20) 4.50 1.30 0.10 2.40 2.00 R0.30 R0.30 2.54 0.50 4.40 7.0 10.0 0.40 R 0.45 7.2 9.20 4.90 Unit: mm 10.00 4.60 1.20 0.75 8.0 1.75 15.30 R 0.3 1.20 0.90 FC66150~3 1.5A Ultra Low - Droupout Voltage Regulator

TO-252 P ACKAGE OUTLINE DIMENSIONS SOT- 223 PACKAGE OUTLINE DIMENSIONS 0~10° Pad Layout 0.059 1.5 0.059 1.5 0.059 1.5 0.248 6.3 0.091 2.3 0.091 2.3 0.079 2.0 0.079 2.0 Inches mm 0.15 3.8 6.50 ± 0.05 5.340 ± 0.05 29° ± 0.5° REF 0.6 6.10 ± 0.05 7.20 ± 0.05 0.75 ± 0.10 0.89 ± 0.05 0.81 ± 0.038 2.30 ± 0.05 0.508 ± 0.0127 0.070 ± 0.05 1.0 ± 0.05 0.75 ± 0.10 1.525 ± 0.10 2.70 ± 0.10 9.900 R0.15 max Unit: mm Unit: mm 3.0 ± 0.05 7.0 ± 0.15 1.75 ± 0.10 3.5 ± 0.10 0.70 ± 0.05 2.30TYP 4.6 ± 0.1 0.95TYP 0~0.075 0.3 ± 0.05 0.65 ± 0.10 1.80max 0.60 1.75 ± 0.10 0.06 ± 0.04 6.50 ± 0.10 1.6 ± 0.10 0.84 0.46 R 0.25 ± 0.13 13° 13° Pad Layo ut 0.244 6.20 0.228 5.80 0.118 3.0 0.063 1.6 0.243 6.172 0.101 2.58 Inches mm ( ) FC66150~3 1.5A Ultra Low - Droupout Voltage Regulator

1.8 TA3 T

TA3: TO-263-3 TA5: TO-263-5 TB3: TO-220 TC3: TO-252 Shipping R: Tape & Reel T: Tube Output Voltage 1.5: 1.5V 1.8: 1.8V 2.5: 2.5V 3.0: 3.0V 3.3: 3.3V 5.0: 5.0V 12: 12V FC66150~3 1.5A Ultra Low - Droupout Voltage Regulator FC FCI