FC61X222XX

FC61 FS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Features

• CMOS Low Power Consumption : Typical 1.0uA at Vin=2.0V
• Selectable Detect V oltage : 1.1V to 7.0V in 0.1V increments
• Highly Accurate : Detect V oltage 1.1V to 1.9V±3% Detect V oltage 2.0V to 7.0V ±2%
• Operating V oltage : 0.8V to 10.0V
• Package Available : SOT-23 (150mW), SOT-89 (500mW) TO92 (300mW) General Description The FC61 is a group of high-precision and low-power voltage detectors. The FC61 consists of a highly-accurate and low-power reference voltage source, a comparator, a hysteresis circuit, and an output driver. Detect voltage is very accurate and stable with N-channel open drain and CMOS, are available. Block Diagram (1) CMOS Output (2) N-Channel Open Drain Output Absolute Maximum Ratings Parameter Symbol Ratings Units Input Voltage V IN 10 Output Current I OUT 50 Output Voltage VOUT VSS-0.3 ~VIN +0.3 SOT-23 150 SOT-89 500 Continuous Total Power Dissipation TO-92 Pd 300 mW Operating Ambient Temperature Topr -40 ~ +85 oC Storage Temperature stg -55 ~ +125 oC 2019. 05. 15 1/13 SEMICONDUCTOR TECHNICAL DATA FC61 Revision No : 1 V mA V T ◆◆ ◆

Electrical Characteristics

Parameter Symbol Conditions Min Typ Max Units Detect Voltage Hysteresis Range Supply Current Operating Voltage Output Current Transient Delay Time (V V Inversion) 2019. 05. 15 2/13 FC61 Revision No : 1 DR OUT VDF VHYS ISS I OUT tDLY VIN V = 1.1V to 1.9VDF V = 5.0VIN V = 4.0VIN V = 0.5VIN V = 1.0VIN V = 2.0VIN V = 5.0VIN V = 4.0VIN V = 3.0VIN V = 2.0VIN V = 1.0VIN V = 1.1 ~ 7.0VDF V = 3.0VIN V = 2.0V to 7.0VDF V = 2.0VDS V = 8.0VIN (CMOS Output) While V changes from 0.6V to 10V IN Nch Pch X0.97 0.8 X0.02 X0.98 VDF VDF V X0.05DF 0.8 1.0 1.3 1.6 2.0 1.0 3.0 5.0 11.0 13.0 -10.0 X1.03 X0.08 X1.02 2.0 2.5 3.0 3.5 4.0 10.0 0.2 V ms mA V uA V V

Electrical Characteristics By Detector Threshold Standard Detector FC61X113XX 1.067 1. 100 1.133 FC61X123XX 1.164 1. 200 1.236 FC61X133XX 1.261 1. 300 1.339 FC61X143XX 1.358 1. 400 1.442 FC61X153XX 1.455 1. 500 1.545 FC61X163XX 1.552 1. 600 1.648 FC61X173XX 1.649 1. 700 1.751 FC61X183XX 1.746 1. 800 1.854 FC61X193XX 1.843 1. 900 1.957 FC61X202XX 1.960 2. 000 2.040 FC61X212XX 2.058 2. 100 2.142 FC61X222XX 2.156 2. 200 2.244 FC61X232XX 2.254 2. 300 2.346 FC61X242XX 2.352 2. 400 2.448 FC61X252XX 2.450 2. 500 2.550 FC61 X262XX 2.548 2. 600 2.652 FC61X272XX 2.646 2. 700 2.754 FC61X282XX 2.744 2. 800 2.856 FC61X292XX 2.842 2. 900 2.958 FC61X302XX 2.940 3. 000 3.060 FC61X312XX 3.038 3. 100 3.162 FC61X322XX 3.136 3. 200 3.264 FC61X332XX 3.234 3. 300 3.366 FC61X342XX 3.332 3. 400 3.468 FC61X352XX 3.430 3. 500 3.570 FC61X362XX 3.528 3. 600 3.672 FC61X372XX 3.626 3. 700 3.774 FC61X382XX 3.724 3. 800 3.876 FC61X392XX 3.822 3. 900 3.978 FC61X402XX 3.920 4. 000 4.0 80 FC61X412XX 4.018 4. 100 4.182 FC61X422XX 4.116 4. 200 4.284 FC61X432XX 4.214 4. 300 4.3 86 FC61X442XX 4.312 4. 40 0 4.488 FC61X452XX 4.410 4. 500 4.590 FC61X462XX 4.508 4. 600 4.692 FC61X472XX 4.606 4. 700 4.794 FC61X482XX 4.704 4. 800 4.896 FC61X492XX 4.802 4. 900 4.998 FC61X502XX 4.900 5. 000 5.100 FC61X512XX 4.998 5. 100 5.202 FC61X522XX 5.096 5. 200 5.304 FC61X532XX 5.194 5. 300 5.4 06 FC61X542XX 5.292 5. 400 5.508 FC61X552XX 5.390 5. 500 5.610 FC61X562XX 5.488 5. 600 5.712 FC61X572XX 5.586 5. 700 5.814 FC61X582XX 5.684 5. 800 5.916 FC61X592XX 5.782 5. 900 6.018 FC61X602XX 5.880 6. 000 6.120 2.5 2.0 1.0 VIN = 1.0V 0.8 VIN = 2.0V VIN = 5.0V 2.0 4.0 VIN = 3.0V 1.3 3.0 VIN = 4.0V 1.6 3.5 Supply Current ISS (uA) Hysteresis Range VHYS (V) Detector Threshold VDF (V) VDF x 0.02 V DF x 0.08 Part Number 2019. 05. 15 3/13 FC61 Revision No : 1 MAX.TYP. VDF x 0.02 V DF x 0.08

tDLY (ms) MIN. MAX. Cond ition TYP. MAX. FC61X113X X FC61X123XX FC61X133XX FC61X143XX VDS = 0.5V FC61X153XX FC61X163XX VIN = 1.0V FC61X173XX FC61X183XX FC61X193XX FC61 X202XX FC61 X212XX FC61 X222XX FC61 X232XX FC61 X242XX VDS = 0.5V FC61X252XX FC61X262XX VIN = 2.0V FC61X272XX FC61X282XX FC61 X292XX FC61 X302XX FC61 X312XX FC61 X322XX FC61 X332XX FC61 X342XX VDS = 2.1V VDS = 0.5V FC61X352XX FC61X362XX V N = 8.0V VIN = 3.0V FC61X372XX FC61X382XX FC61 X392XX FC61 X402XX FC61 X412XX FC61 X422XX FC61 X432XX FC61 X442XX VDS = 0.5V FC61X452X X FC61X462XX VIN = 4.0V FC61X472XX FC61X482XX FC61 X492XX FC61 X502XX FC61 X512XX FC61 X522XX FC61 X532XX FC61 X542XX VDS = 0.5V FC61X552XX FC61X562XX VIN = 5.0V FC61X572XX FC61X582XX FC61 X592XX FC61 X602XX FC61 X702XX 0.2 1.0 0.8V 10V -1 0.0 13.0 3.0 5.0 11.0 Part Number Operating Voltage V N (V) Pch IOUT (mA) Nch IOUT (mA) 2019. 05. 15 4/13 FC61 Revision No : 1 Pch Output Current Nch Output Current Condition TYP.

SOT-23-3 SOT-89-3 TO-92 Pin Name Function 1 1 1 VOUT Supply Voltage Output 3 2 2 VIN Supply Voltage Input 2 3 3 VSS Ground Pin Configuration SOT-23-3 SOT-89-3 TO-92 2019. 05. 15 5/13 FC61 Revision No : 1

3 VIN

2 VSS

1 VOUT SOT-23

2 VIN

3 VSS

1 VOUT SOT-89

V SS V OUT TO-92 ◆ ◆

Functional Description (Refers to CMOS Output) 1. Firstly, when a voltage, higher than the Release Voltage (VDR) , is applied to the Voltage Input pin (VIN), that voltage will gradually fall. When a voltage higher than the Detect Voltage (VDF) is applied to the Input Voltage pin (VIN), output at VOUT will be equal to the input at the VIN pin. High impedance exists on the Output pin (VOUT) with the N-channel open drain configuration. If the pin is pulled-up. VOUT will be identical to the pull-up voltage. 2. When the i nput Voltage (VIN) falls below the Detect Voltage (VDF) level, the Output Voltage (VOUT) is equal to the Ground Voltage (VSS) level (detect state). Also applicable to N-channel open drain configuration. 3. When the Input Voltage (VIN) falls below the Minimum Operating Voltage (VMIN) level, output becomes unstable. In the case of N-channel open drain configuration, as the output pin is generally pulled-up, the output will be equal to the pull-up voltage. 4. When the Input Voltage (VIN) rises, output become stable once the voltage has exceeded VMIN. The Output Voltage (VOUT) will remain equal to the Ground Voltage SS) level until the Input Voltage (VIN) reaches the Detect Release Voltage (VDR) level. 5. When the Input Voltage (VIN) rises above the Detect Release Voltage (VDR) level, output at the Output pin (VOUT) is equal to VIN. (High impedance exists with the N-channel open drain output configuration and V OUT follows the pull-up voltage.) Notes : 1. The difference between V DR and VDF represents the Hysteresis Range. 2. The Propagation Delay Time (tDLY) represents the time it takes for the Input Voltage (V IN) to appear at the Output pin (VOUT), once the said voltage has exceeded the Release Voltage (VDR) level. Timing Diagram 2019. 05. 15 6/13 FC61 Revision No : 1 1 2 3 4 5 Input V oltage (V ) Detect Release V oltage(D ) Detect V oltage(V ) Minimum Operating V oltage (V ) Ground V oltage (V ) Output V oltage (V ) Propagation Delay Time (t ) Ground V oltage (V ) IN DR DF OUT SS OUT SS DLY

1) Supply Current vs. Input V oltage FC61C182 0.5 1.5 2.5 3.5 0 1 234 5 6 7 8 9 10 Input Voltage VIN (V) T opr =80℃ Topr =25℃ T opr =-40℃ 2) Detect, Release V oltage vs. Ambient Temperature FC61C272 2.68 2.70 2.72 2.74 2.76 2.78 2.80 2.82 2.84 2.86 2.88 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature (℃) VDF VD R FC61C182 1.78 1.80 1.82 1.84 1 86 1.88 1.90 1.92 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature (℃) VDF VDR 3) Output V oltage vs. Input V oltage Typical Performance Characteristics 2019. 05. 15 7/13 FC61 Revision No : 1 FC61C272 0.5 1.5 2.5 3.5 0 1 2 3 4 5 6 7 8 9 10 Input Voltage VIN(V) Topr =80℃ Topr =25℃ Topr =-40℃ FC61C182 0 5 1 5 2 5 0 0.5 1 1 5 2 2.5 Input Voltage VIN(V) Topt = 25℃ FC61C272 0.5 1.5 2.5 3.5 0 0.5 1 1.5 2 2.5 3 Input Voltage VIN(V) Topt = 25℃ Supply Current Iss(uA)Detector Threshold VDET(V)Output Voltage VOUT(V) Supply Current Iss(uA)Detector Threshold VDET(V)Output Voltage VOUT(V)

4) N-ch Driver Output Current vs. VDS FC61C272 0 0 5 1 1 5 2 2.5 3 VDS(V) Topt = 25℃ VIN = 2.5V VIN = 2.0V VIN = 1 5V 5) N-ch Driver Output Current vs. Input V oltage FC61C272 0 0.5 1 1 .5 2 2.5 3 Input Voltage VIN(V) VDS = 0.5V Topr =80℃ Topr =25℃ Topr =-40℃ FC61C182 0.5 1.5 2.5 3.5 0 0 5 1 1.5 2 Input Voltage VIN(V) VDS = 0.5V Topr =80℃ Topr =25℃ Topr =-40℃ 6) P-ch Driver Output Current vs. Input V oltage FC61C272 012 3 4 5 6 7 Input Voltage VIN(V) VDS = 2.0V Topt = 25℃ VDS = 1.5V VDS = 1.0V VDS = 0.5V FC61C182 0 123 4567 Input Voltage VIN(V) VDS = 2.0V Topt = 25℃ VDS = 1.5V VDS = 1.0V VDS = 0.5V 2019. 05. 15 8/13 FC61 Revision No : 1 FC61C182 0 2 0.4 0 6 0.8 1 2 1.4 1 6 1.8 VDS(V) VIN = 1.5V Topt = 25℃ Output Current IOUT(mA)Output Current IOUT(mA)Output Current IOUT(mA) Output Current IOUT(mA)Output Current IOUT(mA)Output Current IOUT(mA)

Ordering Information

a Output Configuration C = CMOS Output N = N-Channel Output Detect Voltage eg. 30=3.0V b 50=5.0V c Detect Voltage Accuracy 2 = ±2.0% 3 = ±3.0% d Package Type M = SOT-23-3 P = SOT-89 T = TO-92 e Device Orientation R = Embossed Tape (Orientation of Device : Right) L = Embossed Tape (Orientation of Device : Left) B = Bag (TO-92) H = Paper Tape (TO-92) G = Lead Free Part SOT-89-3 : Type C = V oltage Detector (CMOS Output) N = V oltage Detector (N-channel Output) 2,3 Output Voltage eg. 30 = 3.0V

4 Internal Code

SOT-23-3 : Designator Type C = V oltage Detector (CMOS Output) N = V oltage Detector (N-channel Output) 2,3 Output Voltage eg. 30 = 3.0V TO-92 : Type C = V oltage Detector (CMOS Output) N = V oltage Detector (N-channel Output) 2,3 Output Voltage eg. 30 = 3.0V 5, 6 Year Code eg. 05 = Year 2005 7, 8 Week Code eg. 30 = Week 30 2019. 05. 15 9/13 FC61 Revision No : 1 FC61 x x x x x x G G

Description

Recommended Pattern Layout 0.4 -0.1 -0.05 (0.95) 1.9 ± 0.2 2.9 ± 0.2 . 1 6-0.01 .2 1 . 2 8 ± 2 . 0 1.1 ± 0.1 2 . 0 . n mi 0 ~ 0.1 (0.8) 0.15 -0.1 -0.05 SOT-23-3: 0.49 ± 0.06 2. 5 4± 5 1 0. . 5 4 x a 2 m 1.72 ± 0.1 4.5 ± 0.1 mm 0.4 ± 0.04 1.5 ± 0.1 SOT-89-3 : 4.2 max 1.27 1.27 Ø5.2 max . 3 5 maxn mi . 2 7 1 TO-92 : . 8 0 1.0 9 1. 2.4 2.2 .9 0 1.5 1.6 1.01 0 3.7 45º 45º Units : mm SOT-23-3 : SOT-89-3 : 2019. 05. 15 10/13 FC61 Revision No : 1 1.1

SOT-23 Taping Specifications : Direction of feed “R” type [Orientation of Device: Right] Standard Type Direction of feed “L” type [Orientation of Device: Left] Reverse Type 4 ± 0.1 2 ± 0.05 Ø 1.5 + 0.1 - 0 8 ± 2 0. 4 ± 0.1 SIZE (mm) A Ø 178 ± 0.8 B 2 ± 0.2 C Ø 13 ± 0.2 D Ø 21 ± 0.8 G 8 ± 0.5 H Ø 60 3,000 pcs / reel SOT-23 : 2019. 05. 15 11/13 FC61 Revision No : 1

SOT-89 Taping Specifications : Direction of feed “R” type [Orientation of Device Right] Standard Type SOT-89 : 1,000 pcs / reel 4.0 ± 0.1 . 1 5± 0. 1 5 6 5± 0 05 8.0 ± 0.1 ± . 0 2 2.0 ± 0.05 Ø 1.5 + 0.1 “L” type [Orientation of Device Left] Reverse Type Direction of feed 2019. 05. 15 12/13 FC61 Revision No : 1 SIZE (mm) A Ø 178 ± 0.8 B 2 ± 0.2 C Ø 13 ± 0.2 D Ø 21 ± 0.8 G 12 ± 0.5 H Ø 60 120

SIZE (mm) P 12.7 ± 1.0 PO 12.7 ± 0.3 P2 6.35 ± 0.4 F 2.5 W 18.0 ± 1.0 WO 6.0 ± 0.3 W1 9.0 ± 0.5 W2 0.5 MAX H 19.0 ± 0.5 H0 16.0 ± 0.5 H1 32.25 MAX D Ø 4.0 ± 0.2 t 0.6 ± 0.2 L1 3.5 MIN P H WO W DF PO 0 H t + 0.45 - 0.15 2,000 pcs / box TO-92 Taping Specifications : The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. 2019. 05. 15 13/13 FC61 Revision No : 1