FC101 BEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: belfuse@belfuse.com Website: www.belfuse.com Specifications subject to change without notice Fuse Clips Material Brass (65Cu/35Zn), 0.020 inch thick, full hard temper Plating Bright tin (150 microinch, minimum), over nicke barrier plate Solderability Per Mil-Std-202F , Method 208 Torque Minimum 1.0 in.-oz. to twist a fuse in a single clip Extraction Minimum 2 lbs. to extract a fuse from a single clip Marking “bel” die stamped on 1 side Ampere Rating FC-101, -102 -up to 15A. FC-201, -211 -up to 10A NOTE - suitability at higher currents is dependent on fuse type, circuit conditions, AND PC board design (track width/thickness, means to solder clip legs, etc). Each combination of clip, fuse, PC board and operat- ing condition needs to be evaluated For 1/4 inch (6.35mm) Diameter Fuses TYPE FC-101 PC Board Mount [Ear Stops] TYPE FC-102 PC Board Mount [Earless] For 5mm Diameter Fuses TYPE FC-201 5mm Clip PC Board Mount [Ear Stops] TYPE FC211 Locking Type PC Board Mount [Ear Stops] The T ype FC-211 Locking Clip is designed for 5 mm diameter fuses, for use in 0.062 inch thick printed cir- cuit boards. The legs have tabs which “lock” into the board and prevent “floating” of the clip during wave solder. This design also allows elimination of the “clinching” operation on the underside of the board. BEL .280 .425 .14 .30 .312 .065 BEL .280 .425 .14 .30 .312 .065 BEL .265 .245 .34 .14 .250 .066 .035 .059 .011 .045 .265 .245 .34 .14 .25 .028 REF .066