FBR46_09 FUJITSU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment. l High surge voltage 2,500 V minimum of surge strength (Bellcore standard), and 1,500 VAC minimum of dielectric strength between coil and contact (-15, -16 type). l Low power consumption 85 mW of operate power (150 mW of nominal power con- sumption) by built-in permanent magnet. l Shipping tube package l RoHS compliant since date code: 0433A Please see page 7 for more information (a) Series Name FBR46 : FBR46 Series (b) Enclosure N : Plastic sealed (*) Coil Type D : Standard, -15, -16 (DC coil) G : 65% Operate type (c) Nominal Voltage (Example) Standard, -15, -16 type (Example) Latching type 005: 5 VDC 05: 5 VDC 012: 12 VDC 12: 12 VDC (refer to the COIL DATA CHART) (d) Contact Material –P : Gold-overlay silver-palladium (e) Dielectric Strength Nil : Between coil and contacts 1,000 VAC, between contacts 750 VAC -15 : Between coil and contacts 1,500 VAC, between contacts 750 VAC -16 : Between coil and contacts 1,500 VAC, between contacts 1,000 VAC (f) Safety Specification Nil : Standard (UL114 recognized) -CSA : UL114 + CSA recognized Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR46ND012-P Stamp: 46ND012-P n ORDERING INFORMATION FBR46 N D 012 -P -15 -CSA [Example] (a) (b) (*) (c) (d) (e) (f) FBR46 SERIES MINIATURE RELAY

2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)

  1. STANDARD (D type) Nominal Nominal Coil current Must Must Nominal Operate Coil MODEL resistance (at nominal operate release temperature voltage (±10%) voltage) voltage*1 voltage*1 power power rise approx. FBR46ND003-P 3 VDC 60 Ω 50 mA FBR46ND005-P 5 VDC 167 Ω 30 mA FBR46ND006-P 6 VDC 240 Ω 25 mA FBR46ND009-P 9 VDC 540 Ω 17 mA FBR46ND012-P 12 VDC 960 Ω 13 mA FBR46ND024-P 24 VDC 2,880 Ω 8 mA 200 mW 112 mW 30 deg *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C of nominal of nominal 150 mW 85 mW 25 deg voltage voltage (at nominal max. (at nominal voltage voltage) 2. 65% OPERATE TYPE (G type) Nominal Nominal Coil current Must Must Nominal Operate Coil MODEL resistance (at nominal operate release temperature voltage (±10%) voltage) voltage*1 voltage*1 power power rise approx. FBR46NG003-P 3 VDC 36 Ω 83 mA FBR46NG005-P 4.5 VDC 81 Ω 56 mA FBR46NG006-P 6 VDC 144 Ω 41 mA FBR46NG009-P 9 VDC 324 Ω 27 mA FBR46NG012-P 12 VDC 576 Ω 20 mA FBR46NG024-P 24 VDC 2,304 Ω 10 mA *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C of nominal of nominal 250 mW 106 mW 35 deg voltage voltage (at nominal max. (at nominal voltage voltage) Nominal MODEL Nominal Coil current Must Must Nominal Operate Coil resistance (at nominal operate release temperature voltage (±10%) voltage) voltage*1 voltage*1 power power rise -15 type -16 type approx. FBR46ND003-P-15 FBR46ND003-P-16 3 VDC 45 Ω 67 mA FBR46ND005-P-15 FBR46ND005-P-16 5 VDC 125 Ω 40 mA FBR46ND006-P-15 FBR46ND006-P-16 6 VDC 180 Ω 33 mA FBR46ND009-P-15 FBR46ND009-P-16 9 VDC 405 Ω 22 mA FBR46ND012-P-15 FBR46ND012-P-16 12 VDC 720 Ω 17 mA FBR46ND024-P-15 FBR46ND024-P-16 24 VDC 2,304 Ω 10 mA 250 mW 140 mW 35 deg *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 3. HIGH DIELECTRIC STRENGTH TYPE (-15, -16 type) of of 200 mW 112 mW 30 deg nominal nominal (at nominal max. (at nominal voltage voltage voltage) voltage)

Item Standard -65% operate -15 type -16 type Contact Arrangement and Style 2 form C (DPDT), bifurcated Material Gold-overlay silver-palladium Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) Ratings (resistive) 0.5 A 120 VAC or 1 A 30 VDC Maximum Carrying Current 1.25 A Maximum Switching Power 60 AV or 30 W Max. Switching Voltage*1 125 V Maximum Switching Current 1 A Minimum Switching load*2 0.01 mA 10 mVDC (reference) Electrostatic Capacity Approximately 2 pF (between coil and contacts) (reference) Approximately 1 pF (between open contacts) Coil Nominal power (at 20°C) 150 to 200 mW 205 mW 200 to 250 mW Operate power (at 20°C) 85 to 112 mW 106 mW 112 to 114 mW Operating Temperature –30°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Maximum 5 ms Life Mechanical 50 × 106 operations minimum Electrical (refer to the DC 2 × 105 operations minimum (at contact rating) REFERENCE DATA) AC 1 × 105 operations minimum (at contact rating) Other Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm) Shock Misoperation 500 m/s2 (11 ±1 ms) Resistance Endurance 1,000 m/s2 (11 ±1 ms) Weight Approximately 2.5g n SPECIFICATIONS *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment.

Item Standard 65% operate -15 type -16 type Resistance (initial) (500 VDC) Minimum 1,000 MΩ 1 min. Dielectric Strength open contacts 720VAC - 1 min. coil and contact adjacent contact 1,000 VAC -1min. open contacts 750VAC coil and contact adjacent contact 1,500 VAC -1min. open contacts 1,000VAC -1min. coil and contact adjacent contact 1,500 VAC -1min. Surge Voltage non-conducted terminals 1,500V 10 x 700µs standard wave open contact 1,500V 10 x 700µs standard wave coil and contact adjacent contact 2,500V 2 x 10µs standard wave n INSULATION 1,500 V 750 V 10μs 700μs 1,500 V 750 V 10μs 700μs 2,500 V 1,250 V 2μs 10μs Type Compliance Contact rating UL UL 114 E63615 Flammability: UL 94-V0 (plastics) 0.3A, 250VAC (resistive) 1A, 30VDC CSA C22.2 No. 14 LR 40304, LR 64026 n SAFETY STANDARDS

Contact load current (A) 100 (´104) Service life (operations) 0.5 1.0 1.5 2.0

30 V DC resistive load

Range of operation temperature and voltage [D type] Operating temperature (°C) –10 0 10 20 30 40 50 60 70 80 100 110 120 130 140 150 160 Range of operation temperature and voltage [G type] –10 0 10 20 30 40 50 60 70 80 100 110 120 130 140 150 160 Range of operation temperature and voltage [–15,–16 type] –10 0 10 20 30 40 50 60 70 80 100 110 120 130 140 150 160 Maximum switching capacity Contact load voltage (V) 0.1 10 20 120 20030 50 0.3 0.5 1.0 À Contact load current (A) Á ÀAC resistive load ( AC contact rating) ÁDC resistive load ( DC contact rating) Operating voltage range Must operate voltage (Data) assumes that the maximum allowable tem- perature of E type insula- tion coil is 115°C Maximum allowable coil voltage Operating temperature (°C) Operating temperature (°C) Nominal voltage multiplying factor (%) Nominal voltage multiplying factor (%) Nominal voltage multiplying factor (%) Must operate voltage Must operate voltage (Data) assumes that the maximum allowable tem- perature of E type insula- tion coil is 115°C (Data) assumes that the maximum allowable tem- perature of E type insula- tion coil is 115°C Maximum allowable coil voltage Maximum allowable coil voltage

120 V AC

Operating voltage range Operating voltage range n REFERENCE DATA Operate Release Distribution of operate and release voltage Rated coil voltage multiplying factor (%) 0 10 20 30 40 50 60 70 80 Operate Release Distribution of operate and release time Time (ms) 100 0 1 2 3 4 5 6 7 8 Contact resistance (mΩ) Distribution of contact resistance 0 10 20 30 40 50 60 70 80 Distribution (%) Distribution (%) Distribution (%)

■ Dimensions ■ Schematics (BOTTOM VIEW) ■ PC board mounting hole layout (BOTTOM VIEW) ■Tube carrier 12.8 max. 15.8 maximum 501 maximum 5.08 7.62(1.09) .54 15.9+0.1 9.8+0.1 1 3 5 6 12 10 8 7 Polarity 5.08 7.62 5.08 2.54 8–ø0.8 n DIMENSIONS ■ Dimensions (Latching type) ■ Schematics (BOTTOM VIEW) ■ PC board mounting hole layout (BOTTOM VIEW) ■ Tube carrier 5.08 7.9+0.13.5 12.8 max. 15.8 maximum 501 maximum 5.08 2.54 15.9+0.1 9.8+0.1 1 3 5 6 12 10 8 7 polarity 5.08 7.62 5.08 2.54 10–ø0.8 Note: ·No 2, 11 terminals are for double winding latching type only.

  • ( ) ( ) are reset polarity for single winding latching type.
  • The terminal number is not shown on the relay. ( ) 2.54 2.54 Unit: mm
  1. General Information l Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. RoHS Compliance and Lead Free Relay Information Reflow Solder condition 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. We highly recommend that you confirm your actual solder conditions Flow Solder condition: Pre-heating: maximum 120˚C Soldering: dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec.

3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25

2132 WV Hoofddorp

Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ Fujitsu Components International Headquarter Offices ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June 30, 2009.