FBR46

FBR46 FUJITSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment. l High surge voltage 2,500 V minimum of surge strength (Bellcore standard), and 1,500 VAC minimum of dielectric strength between coil and contact (-15, -16 type). l Low power consumption 85 mW of operate power (150 mW of nominal power con- sumption) by built-in permanent magnet. l Shipping tube package (a) Series Name FBR46 : FBR46 Series (b) Enclosure N : Plastic sealed (*) Coil Type D : Standard, -15, -16 (DC coil) G : 65% Operate type L1 : Single winding latching type L2 : Double winding latching type (refer to the SPECIFICATIONS) (c) Nominal Voltage (Example) Standard, -15, -16 type (Example) Latching type 005: 5 VDC 05: 5 VDC 012: 12 VDC 12: 12 VDC (refer to the COIL DATA CHART) (d) Contact Material –P : Gold-overlay silver-palladium (e) Dielectric Strength Nil : Between coil and contacts 1,000 VAC, between contacts 750 VAC -15 : Between coil and contacts 1,500 VAC, between contacts 750 VAC -16 : Between coil and contacts 1,500 VAC, between contacts 1,000 VAC (f) Safety Specification Nil : Standard (UL114 recognized) -CSA : UL114 + CSA recognized Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR46ND012-P Stamp: 46ND012-P n ORDERING INFORMATION FBR46 N D 012 -P -15 -CSA[Example] (a) (b) ( *) (c) (d) (e) (f) FBR46 SERIES FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY

2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)

n SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) C22.2 No. 14 (File No. LR40304 or LR64026) Nominal voltage Contact rating 1.5 to 24 VDC 1 A 30 VDC resistive

0.5 A 120 VAC resistive

• Excluding latching type FBR46L Item D type, G type -15 type -16 type Latching Contact Arrangement and Style 2 form C (DPDT), bifurcated Material Gold-overlay silver-palladium Resistance (initial) Maximum 100 m Ω (at 0.1 A 6 VDC) Ratings (resistive) 0.5 A 120 VAC or 1 A 30 VDC Maximum Carrying Current 1.25 A Maximum Switching Power 60 AV or 30 W Max. Switching Voltage*1 125 V Maximum Switching Current 1 A Minimum Switching load*2 0.01 mA 10 mVDC (reference) Electrostatic Capacity Approximately 2 pF (between coil and contacts) (reference) Approximately 1 pF (between open contacts) Operating Temperature –30 °C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Maximum 2 ms Insulation Resistance (initial) Minimum 1000 M Ω (at 500 VDC) Dielectric between coil and contacts1,000 VAC 1,500 VAC 1,000 VACStrength between adjacent contacts (for 1 minute) between open contacts 750 VAC 1,000 VAC 750 VAC between set-reset-coil— 250 VAC Surge Strength between coil and contacts1,500 V (at 10 × 700 µs) 2,500 V (at 2 × 10 µs) 1,500 V (at 10 × 700µs) between adjacent contacts between open contacts 1,500 V(at 10 × 700 µs) Continued n SPECIFICATIONS 2,500 V 1,250 V 2 µs 10 µs 1,500 V 750 V 10 µs 700 µs

Item D type, G type -15 type -16 type Latching Life Mechanical 50 × 106 operations minimum Electrical (refer to the DC 2 × 105 operations minimum (at contact rating) REFERENCE DATA) AC 1 × 105 operations minimum (at contact rating) Other Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm) Shock Misoperation 500 m/s2 (11 ±1 ms) Resistance Endurance 1,000 m/s2 (11 ±1 ms) Weight Approximately 2.5 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The mini- mum switching load varies with the switching frequency and operation environment. n COIL DATA CHART 1. STANDARD (D type) Nominal Nominal Coil current Must Must Nominal Operate Coil MODEL resistance (at nominal operate release temperaturevoltage (±10%) voltage) voltage* 1 voltage*1 power power rise approx. FBR46ND003-P 3 VDC 60 Ω 50 mA FBR46ND005-P 5 VDC 167 Ω 30 mA FBR46ND006-P 6 VDC 240 Ω 25 mA FBR46ND009-P 9 VDC 540 Ω 17 mA FBR46ND012-P 12 VDC 960 Ω 13 mA FBR46ND024-P 24 VDC 2,880 Ω 8 mA 200 mW 112 mW 30 deg *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C of nominal of nominal 150 mW 85 mW 25 deg voltage voltage (at nominal max. (at nominal voltage voltage) 2. 65% OPERATE TYPE (G type) Nominal Nominal Coil current Must Must Nominal Operate Coil MODEL resistance (at nominal operate release temperaturevoltage (±10%) voltage) voltage* 1 voltage*1 power power rise approx. FBR46NG003-P 3 VDC 36 Ω 83 mA FBR46NG005-P 4.5 VDC 81 Ω 56 mA FBR46NG006-P 6 VDC 144 Ω 41 mA FBR46NG009-P 9 VDC 324 Ω 27 mA FBR46NG012-P 12 VDC 576 Ω 20 mA FBR46NG024-P 24 VDC 2,304 Ω 10 mA *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C of nominal of nominal 250 mW 106 mW 35 deg voltage voltage (at nominal max. (at nominal voltage voltage)

MODEL Nominal Coil current Must Must Nominal Operate Coil resistance (at nominal operate release temperaturevoltage (±10%) voltage) voltage*1 voltage*1 power power rise -15 type -16 type approx. FBR46ND003-P-15 FBR46ND003-P-16 3 VDC 45 Ω 67 mA FBR46ND005-P-15 FBR46ND005-P-16 5 VDC 125 Ω 40 mA FBR46ND006-P-15 FBR46ND006-P-16 6 VDC 180 Ω 33 mA FBR46ND009-P-15 FBR46ND009-P-16 9 VDC 405 Ω 22 mA FBR46ND012-P-15 FBR46ND012-P-16 12 VDC 720 Ω 17 mA FBR46ND024-P-15 FBR46ND024-P-16 24 VDC 2,304 Ω 10 mA 250 mW 140 mW 35 deg *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 3. HIGH DIELECTRIC STRENGTH TYPE (-15, -16 type) of of 200 mW 112 mW 30 deg nominal nominal (at nominal max. (at nominal voltage voltage voltage) voltage) NominalMODEL Coil current Must MustNominal resistance (at nominal operate release Nominal Operate Single winding Double winding voltage (±10%) voltage) voltage*1 voltage*1 power power latching type latching type approx. FBR46NL103-P FBR46NL203-P 3 VDC 45 Ω 67 mA FBR46NL105-P FBR46NL205-P 5 VDC 125 Ω 40 mA FBR46NL106-P FBR46NL206-P 6 VDC 180 Ω 33 mA FBR46NL109-P FBR46NL209-P 9 VDC 405 Ω 22 mA FBR46NL112-P FBR46NL212-P 12 VDC 720 Ω 17 mA *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 4. LATCHING TYPE (L1, L2 type) 80% max. 80% max. Approx. Approx. of nominal of nominal 200 mW 128 mW voltage voltage (at nominal max. voltage)

Contact load current (A) 100 (×104) Service life (operations) 0.5 1.0 1.5 2.0

30 V DC resistive load

Range of operation temperature and voltage [D type] Operating temperature (˚C) – 1 00 1 02 03 04 05 06 07 08 0 100 110 120 130 140 150 160 Range of operation temperature and voltage [G type] – 1 00 1 02 03 04 05 06 07 08 0 100 110 120 130 140 150 160 Range of operation temperature and voltage [–15,–16 type] – 1 00 1 02 03 04 05 06 07 08 0 100 110 120 130 140 150 160 Maximum switching capacity Contact load voltage (V) 0.1 10 20 120 20030 50 0.3 0.5 1.0 À Contact load current (A) À AC resistive load ( AC contact rating) \` DC resistive load ( DC contact rating) Operating voltage range Must operate voltage (Data) assumes that the maximum allowable tem- perature of E type insula- tion coil is 115˚C Maximum allowable coil voltage Operating temperature (˚C) Operating temperature (˚C) Nominal voltage multiplying factor (%) Nominal voltage multiplying factor (%) Nominal voltage multiplying factor (%) Must operate voltage Must operate voltage (Data) assumes that the maximum allowable tem- perature of E type insula- tion coil is 115˚C (Data) assumes that the maximum allowable tem- perature of E type insula- tion coil is 115˚C Maximum allowable coil voltage Maximum allowable coil voltage

120 V AC

Operating voltage range Operating voltage range n REFERENCE DATA Operate Release Distribution of operate and release voltage Rated coil voltage multiplying factor (%) 01 0 2 0 3 0 4 05 06 07 08 0 Operate Release Distribution of operate and release time Time (ms) 100 0 1 2 3 45678 Contact resistance (mΩ ) Distribution of contact resistance 01 0 2 0 3 0 4 05 06 07 08 0 Distribution (%) Distribution (%) Distribution (%)

(BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) l Tube carrier 12.8 max. 15.8 maximum 501 maximum 5.08 7.62 (1.09) .54 15.9+0.1 9.8+0.1 135 6 12 10 8 7 Polarity 5.08 7.62 5.08 2.54 8–ø0.8 n DIMENSIONS l Dimensions (Latching type) l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) l Tube carrier 5.08 7.9+0.13.5 12.8 max. 15.8 maximum 501 maximum 5.08 2.54 15.9+0.1 9.8+0.1 135 6 12 10 8 7 polarity 5.08 7.62 5.08 2.54 10–ø0.8 Note: ·No 2, 11 terminals are for double winding latching type only.

• ( ) ( ) are reset polarity for single winding latching type.
• The terminal number is not shown on the relay. ( ) 2.54 2.54 Unit: mm

Fujitsu Takamisawa Component Limited Global Marketing and Sales Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 North and South America Fujitsu Takamisawa America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Europe Fujitsu Takamisawa Europe B.V. Diamantlaan 25

2132 WV Hoofddorp

Tel: (31-23) 5560910 Fax: (31-23) 5560950 Asia Pacific Fujitsu Takamisawa Asia Pacific Pte. Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Fujitsu Takamisawa International Headquarter Offices www.fujitsu.takamisawa.com