FBR3 EDI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Up to 250 nanosec. max recovery Exceptionally low leakage Avalanche characteristics EDI T YPE # PRV VOLTS REVERSE RECOVERY TIME FB4 4,000 Not Applicable FB5 5,000 Not Applicable FBR3 3,000 250 Nanoseconds Max FBR3.5 3,500 250 Nanoseconds Max FBR4 4,000 250 Nanoseconds Max ELECTRICAL CHARACTERISTIC FB Series FBR Series AVERAGE FORWARD CURRENT, IO (With Proper Heat sink) 4.0 A 3.0 A AVERAGE FORWARD CURRENT, IO (Circuit Board Mounted) 2.0 A 1.5 A MAX FORWARD VOLTAGE DROP (@ 20 Amps), 5.0 V 6.5 V MAX SURGE CURRENT (1/2 CYCLE, 60 Hz) 800 A 800 A MAX DC REVERSE CURRENT (25ºC) 5.0 ìA 5.0 ìA OPERATING TEMPERATURE RANGE -55 To 150ºC STORAGE TEMPERATURE RANGE -55 To 150ºC FB FBR HIGH VOLTAGE, HIGH CURENT, STANDARD & FAST RECOVERY, SILICON RECTIFIER DIODES Electrical Characteristics (at T = 25°C Unless Otherwise Specified)A NOTES: It is recommended that a proper heat sink be used on the terminals of this device between the body and the soldering point to prevent damage from excess heat. 21 GRAY OAKS AVENUE * YONKERS. NEW YORK 10710 914-965-4400 * FAX 914-965-5531 * 1-800-678-0828 ELECTRONIC DEVICES, INC. DESIGNERS AND MANUFACTURERS OF SOLID STATE DEVICES SINCE 1951. EE-mail:sales@edidiodes.com Wwebsite: http://www.edidiodes.com* EDI reserves the right to change these specifications at any time without notice.
21 GRAY OAKS AVENUE * YONKERS. NEW YORK 10710 914-965-4400 * FAX 914-965-5531 * 1-800-678-0828 ELECTRONIC DEVICES, INC. DESIGNERS AND MANUFACTURERS OF SOLID STATE DEVICES SINCE 1951. EE-mail:sales@edidiodes.com Wwebsite: http://www.edidiodes.com* EDI reserves the right to change these specifications at any time without notice. NOTE: Maximum lead and terminal temperature for soldering: 1/4 inch from case, for 5 seconds at 250°C