FBR20H

FBR20H FUJITSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

High efficiency electromagnetic circuit saves power consumption. Nominal power consumption: 200 mW Operate power consumption: 112 mW l Strong shock resistance Even with 500 m/s 2 shock, FBR20H Series relays never miss an operation. l High dielectric strength type available (conforms to FCC68.302) Dielectric strength between coil-contact: AC 1,000 V Surge strength between coil-contact: 1,500 V l Easy pattern design Separate location of drive (coil) and output (contact) terminals allows easy PC board pattern design. l Formed terminals for temporary mounting The uniquely designed terminals allow FBR20H Series relays to be mounted temporarily on PC boards. l UL recognized (File No. E63615) l Tube packaging (a) Series Name FBR21: FBR20H Series (single contact) (Contact Style) FBR22: FBR20H Series (bifurcated contact) (b) Enclosure Nil: Flux free type N: Plastic sealed type (Example) H03: 3 VDC (c) Nominal Voltage H05: 5 VDC H12: 12 VDC (refer to the COIL DATA CHART) (d) UL Standard No designation: standard U: UL114 recognized (e) Contact Material P: Gold-overlay silver-palladium (f) Special Type Nil: Standard 02: High dielectric strength type Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR21H05-P Stamp: 21H05-P n ORDERING INFORMATION FBR21 N H12 U – P (–02)[Example] (a) (b) (c) (d) (e) (f) FBR20H SERIES MINIATURE RELAY

1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)

Item Single contact type Bifurcated contact type Contact Arrangement 1 form C (SPDT) Material Gold-overlay silver-palladium Resistance (initial) Maximum 100 m Ω (at 0.1 A 6 VDC) Rating (resistive) 0.5 A 120 VAC or 1 A 24 VDC (resistive load) Maximum Carrying Current 2 A Maximum Switching Power 60 VA or 24 W Maximum Switching Voltage*1 125 V Maximum Switching Current 1 A Minimum Switching Load*2 Plastic sealed 1 mA 1 V Plastic sealed 100 µA 0.1 VDC (reference) Flux free 1 mA 5 V Flux free 1 mA 1 VDC Capacitance Approximately 2 pF (between coil and contact) (reference) Approximately 1 pF (between open contacts) Coil Nominal Power (at 20 °C) Approximately 0.2 W to 0.25 W (24 V coil) Operate Power (at 20°C) Approximately 0.112 W to 0.14 W maximum (24 V coil) Operating Temperature –30 °C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Maximum 2 ms Insulation Resistance (initial) Minimum 100 M Ω (at 500 VDC) Dielectric between coil and contacts 500 VAC 1 minute (standard) Strength 1,000 VAC 1 minute (high dielectric strength type) between open contacts500 VAC 1 minute Surge Strength 1,500 V (10 × 700 µs)(high dielectric strength type) Life Mechanical 5 × 106 operations minimum Electrical 2 × 105 operations minimum (at contact rating)(refer to the REFERENCE DATA) Other Vibration Resistance 10 to 55 Hz (double amplitude of 3.0 mm) Shock Misoperation 500 m/s2 (11±1 ms) Resistance Endurance 1,000 m/s2 (11±1 ms) Weight Approximately 1.7 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The mini- mum switching load varies with the switching frequency and operation environment. Nominal voltage Contact rating 1.5 to 24 VDC 1 A 24 VDC resistive

0.5 A 30 VAC resistive

n SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) 1.500 V 750 V 10 µs 700 µs

Nominal Coil current Must Must Maximum Nominal Coil Single contact type Bifurcated contact type resistance (at nominal operate release allowable temperaturevoltage ±10% voltage) voltage voltage voltage power rise Flux free Plastic sealed Flux free Plastic sealed approx. FBR21H01-P FBR21NH01-P FBR22H01-P FBR22NH01-P 1.5 VDC 11 Ω 136 mA FBR21H03-P FBR21NH03-P FBR22H03-P FBR22NH03-P 3 VDC 45 Ω 67 mA FBR21H05-P FBR21NH05-P FBR22H05-P FBR22NH05-P 5 VDC 125 Ω 40 mA 75% max. 10% min. 200% of Approx. Approx. FBR21H06-P FBR21NH06-P FBR22H06-P FBR22NH06-P 6 VDC 180 Ω 33 mA of nominal of nominal nominal 200 mW 35 deg voltage voltage voltage (at nominal (at nominal FBR21H09-P FBR21NH09-P FBR22H09-P FBR22NH09-P 9 VDC 405 Ω 22 mA voltage) voltage) FBR21H12-P FBR21NH12-P FBR22H12-P FBR22NH12-P 12 VDC 720 Ω 17 mA FBR21H18-P FBR21NH18-P FBR22H18-P FBR22NH18-P 18 VDC 1,620 Ω 11 mA FBR21H24-P FBR21NH24-P FBR22H24-P FBR22NH24-P 24 VDC 2,300 Ω 10 mA 180% 250 mW 40 deg Note: All values in the table are measured at 20°C. n CHARACTERISTIC DATA n REFERENCE DATA Operate Release Distribution of Operate & Release Voltage Rated coil voltage multiplying factor (%) 01 0 2 0 3 0 4 05 06 07 08 0 Operate Release Distribution of Operate & Release Time Time (ms) 100 012 34 5 6 7 Contact Resistance (mΩ ) Distribution of Contact Resistance 01 0 2 0 3 0 4 05 06 07 08 0 Distribution (%) Distribution (%) Distribution (%) 100 110 120 130 140 150 160 0 1 02 03 04 0 5 06 07 0–10 Operating voltage range Must operate voltage Range of operation temperature and voltageNominal Voltage Multiplying Factor (%) Operating temperature (˚C) 0.1 10 20 30 50 120 200 0.2 0.3 0.5 1.0 2.0 Contact load current (A) À À Maximum switching capacity Contact load voltage (V)

24 V DC

120 V AC

Service life (ops.) 0.50 1 1.5 2 2.5 100 200 (x10 )4 Contact load current (A) Maximum allowable coil voltage À AC resistive load ( AC contact rating) \` DC resistive load ( DC contact rating) (DATA) assumes that the maximum allowable temperature of E type insulation coil is 115˚C

9.7+0.34 9.8+0.2 7.4+0.2 (1.3 Max.)5.08 Flux free type 9.7+0.34 10.7+0.2 8.2+0.2 (1.7 Max.)5.08 Plastic sealed type 520 Max. 10.8 Max. 17.6 Max. 5.08 5.08 6–ø0.82.54 12 4 87 5 Flux free type:50 pcs/Tube Plastic sealed type:40 pcs/Tube l Tube carrier l PC board mounting hole layout (BOTTOM VIEW)l Dimensions l Schematics (BOTTOM VIEW) © 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 03/2002 Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25

2132 WV Hoofddorp

Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com Fujitsu Components International Headquarter Offices