FBR20

FBR20 FUJITSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Two FBR20 Series relays can be mounted in the space re- quired for a single FBR210 Series relay. l 2 A carrying current l Strong shock resistance Even with 500 m/s 2 shock, FBR20 Series relays never miss an operation. l Easy pattern design Separate location of drive (coil) and output (contact) termi- nals allows easy PC board pattern design. l Formed terminals for temporary mounting The uniquely designed terminals allow FBR20 Series re- lays to be mounted temporarily on PC boards. l Conforms to FCC68.302 (high dielectric strength type) l UL recognized (File No. E63615) l Tube packaging (a) Series Name FBR21: FBR20 Series (single contact) (Contact Style) FBR22: FBR20 Series (bifurcated contact) (b) Enclosure Nil: Flux free type N: Plastic sealed type (Example) D03: 3 VDC (c) Nominal Voltage D05: 5 VDC D12: 12 VDC (refer to the COIL DATA CHART) (d) UL Standard Nil: Standard U: UL114 recognized (e) Contact Material P: Gold-overlay silver-palladium (f) Special Type Nil: Standard 02: High dielectric strength type (1,000 VAC) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR21D05-P Stamp: 21D05-P n ORDERING INFORMATION FBR21 N D12 U – P (–02)[Example] (a) (b) (c) (d) (e) (f) FBR20 SERIES MINIATURE RELAY

1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)

Item Single contact type Bifurcated contact type Contact Arrangement 1 form C (SPDT) Material Gold-overlay silver-palladium Resistance (initial) Maximum 100 m Ω (at 0.1 A 6 VDC) Rating (resistive) 0.5 A 120 VAC or 1 A 24 VDC (resistive load) Maximum Carrying Current 2 A Maximum Switching Power 60 VA or 24 W Maximum Switching Voltage*1 125 V Maximum Switching Current 1 A Minimum Switching Load*2 Plastic sealed 1 mA 1V Plastic sealed 0.1V 100µA (reference) Flux free 1 mA 5V Flux free 1V, 1mA Capacitance Approximately 2 pF (between coil and contacts) (reference) Approximately 1 pF (between open contacts) Coil Nominal Power (at 20 °C) Approximately 0.3 W Operate Power (at 20°C) Approximately 0.192 W maximum Operating Temperature –30 °C to +65°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Maximum 2 ms Insulation Resistance (initial) Minimum 100 M Ω (at 500 VDC) Dielectric Between coil and contacts 500 VAC for 1 minute (standard) Strength 1,000 VAC for 1 minute (high dielectric strength type) Between open contacts 500 VAC 1 minute Surge Strength 1,500 V (10 × 700 µs)(high dielectric strength) Life Mechanical 5 × 106 operations minimum Electrical 2 × 105 operations minimum (at contact rating)(refer to the REFERENCE DATA) Other Vibration Resistance 10 to 55 Hz (double amplitude of 3.0 mm) Shock Misoperation 500 m/s2 (11±1 ms) Resistance Endurance 1,000 m/s2 (11±1 ms) Weight Approximately 1.7 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The mini- mum switching load varies with the switching frequency and operation environment. Nominal voltage Contact rating 1.5 to 24 VDC 1 A 24 VDC resistive

0.5 A 30 VAC resistive

n SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) 1,500 V 750 V 10µs 700 µs(between coil and contacts)

Nominal Coil current Must Must Maximum Nominal Coil Single contact type Bifurcated contact type resistance (at nominal operate release allowable temperaturevoltage ±10% voltage) voltage voltage voltage power rise Flux free Plastic sealed Flux free Plastic sealed approx. FBR21D01-P FBR21ND01-P FBR22D01-P FBR22ND01-P 1.5 VDC 7.5 W 200 mA FBR21D03-P FBR21ND03-P FBR22D03-P FBR22ND03-P 3 VDC 30 W 100 mA FBR21D05-P FBR21ND05-P FBR22D05-P FBR22ND05-P 5 VDC 83 W 60 mA 80% max. 5% min. 160% of Approx. Approx. FBR21D06-P FBR21ND06-P FBR22D06-P FBR22ND06-P 6 VDC 120 W 50 mA of nominal of nominal nominal 300 mW 45 deg voltage voltage voltage (at nominal (at nominal FBR21D09-P FBR21ND09-P FBR22D09-P FBR22ND09-P 9 VDC 270 W 33 mA voltage) voltage) FBR21D12-P FBR21ND12-P FBR22D12-P FBR22ND12-P 12 VDC 480 W 25 mA FBR21D18-P FBR21ND18-P FBR22D18-P FBR22ND18-P 18 VDC 1,080 W 17 mA FBR21D24-P FBR21ND24-P FBR22D24-P FBR22ND24-P 24 VDC 1,920 W 12.5 mA Note: All values in the table are measured at 20°C. n CHARACTERISTIC DATA 100 110 120 130 140 150 160 170 0 1 02 03 04 05 06 07 0–10 Operating voltage range Must operate voltage (Data) assumes that the maximum allowable temperature of E type insulation coil is 115˚C Range of operation temperature and voltageNominal voltage multiplying factor (%) Operating temperature (˚C) 0.1 10 20 30 50 120 200 0.2 0.3 0.5 1.0 2.0 Contact load current (A) À À À AC resistive load ( AC contact rating) \` DC resistive load ( DC contact rating) Maximum switching capacity Contact load voltage (V)

24 V DC

120 V AC

Service life (ops.) 0.50 1 1.5 2 2.5 100 200 (x10 )4 Contact load current (A) Maximum allowable coil voltage n REFERENCE DATA Operate Release Distribution of operate and release voltage Rated coil voltage multiplying factor (%) 01 0 2 0 3 0 4 05 06 07 08 0 Operate Release Distribution of operate and release time Time (ms) 100 0 1 2 3 4567 Contact resistance (mΩ ) Distribution of contact resistance 01 0 2 0 3 0 4 05 06 07 08 0 Distribution (%) Distribution (%) Distribution (%)

9.7+0.34 9.8+0.2 7.4+0.2 (1.3 Max.)5.08 Flux free type 9.7+0.34 10.7+0.2 8.2+0.2 (1.7 Max.)5.08 Plastic sealed type 520 Max. 10.8 Max. 17.6 Max. 5.08 5.08 6–ø0.82.54 12 4 87 5 Flux free type:50pcs/Tube Plastic sealed type:40pcs/Tube l Tube carrier l PC board mounting hole layout (BOTTOM VIEW)l Dimensions l Schematics (BOTTOM VIEW) Unit: mm © 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 03/2002 Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25

2132 WV Hoofddorp

Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com Fujitsu Components International Headquarter Offices