FBR12

FBR12 FUJITSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

(a) Series Name FBR12 : FBR12 Series (b) Enclosure & Coil Power N : Standard (plastic sealed type) W : High dielectric strength type (plastic sealed type) H : High sensitivity type (c) Coil Type D : DC coil (d) Nominal Voltage Refer to the COIL DATA CHART (e) Contact Material Nil : Gold-overlay silver-nickel –P : Gold-overlay silver-palladium (f) Custom Designation To be assigned custom specification (g) CSA Standard –CSA : UL114 + CSA recognized –CSA : UL1950 + CSA (under application) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR12ND05 Stamp: 12ND05 n FEATURES l Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom relay. l Slim type for high density mounting l Conforms to Bellcore TR-NWT-001089 and FCC Part 68 requirements l UL recognized and CSA certified l Low power consumption l Conforms to IEC 950 (W type only) – 2.5 mm clearance and creepage between coil and contacts –5000 V surge strength between coil and contacts (2x10µs surge wave) –2000 Vrms dielectric strength between coil and contacts –UL 1950 and IEC950 (approval in process) FBR12 N D 12 –P –** (–CSA)[Example] (a) (b) (c) (d) (e) (f) (g) FBR12 SERIES MINIATURE RELAY

2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)

n SAFETY STANDARD AND FILE NUMBERS Nominal coil voltage Contact rating

0.5 A 125 VDC resistive

3 to 24 VDC 2 A 30 VDC resistive

0.3 A 110 VAC resistive

UL508, 1950, 114 (File No. E63615) C22.2 No. 0, No. 14 (File No. LR40304 or LR64026) NOT FOR NEW DESIGNFBR12 SERIES TO BE DISCONTINIED

Life Mechanical 1 × 108 operations minimum Electrical DC 2 × 105 operations minimum 5 × 105 operations minimum (at contact rating) AC 1 × 105 operations minimum 200 × 103 operations minimum Other Vibration Misoperation 10 to 55 Hz (double amplitude of 3.3 mm) Resistance Endurance 10 to 55 Hz (double amplitude of 5.0 mm) Shock Misoperation 500 m/s2 (11±1 ms) Resistance Endurance 1,000 m/s2 ( 6 ±1 ms) n SPECIFICATIONS Item Standard (Gold-overlay silver-nickel)-P type (Gold-overlay silver-palladium) Standard High dielectric Standard High dielectric strength type strength type Contact Arrangement 2 form C (DPDT) Material Gold-overlay silver-nickel Gold-overlay silver-palladium Style Bifurcated Resistance (initial) Maximum 100 m Ω (at 0.1 A 6 VDC) Rating (resistive) 0.5 A 125 VAC or 1 A 30 VDC Maximum Carrying Current 2 A (at 20°C) Maximum Switching Power 62.5 VA or 60 W Max. Switching Voltage*1 250 VAC or 220 VDC Maximum Switching Current 2 A Minimum Switching Load*2 10 µA 10 VDC (reference) Capacitance Approximately 1.0 pF (between open contacts, adjacent contacts ) (at 10 kHz) Approximately1.0 pF (between coil and contacts) Coil Nominal power (at 20 °C) Approximately Approximately Approximately Approximately Operate power (at 20°C) Approximately Approximately Approximately Approximately Thermal Resistance at Approximately 115°C/WContinuous Thermal Load Operating Temperature –40 °C to +85°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 4 msec. Release (at nominal voltage) Maximum 4 msec. Max. Switching Frequency Mechanical 3 Hz or electrical 0.5 Hz (at contact rating) Insulation Resistance (initial) Minimum 1000 M Ω (at 500 VDC) Dielectric between open contacts 1,000 VACStrength adjacent contacts 1 minimum between coil and contacts1,500 VAC 1 min. 2,000 VAC 1 min. 1,500 VAC 1 min. 2,000 VAC 1 min. Surge between open 1,500 VStrength contacts, 10 × 700 µs adjacent contacts between coil and contacts2,500 V 5,000 V 2,500 V 5,000 V 2 × 10 µs 2 × 10 µs 2 × 10 µs 2 × 10 µs 1,500 750 10 700 2,500 1,250 21 0 *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment.

Standard (Gold-overlay silver-nickel) -P type (Gold-overlay silver-palladium) Contact Arrangement 2 form C (DPDT) Material Gold-overlay silver-nickel Gold-overlay silver-palladium Style Bifurcated Resistance (initial) Maximum 100 m Ω (at 0.1 A 6 VDC) Rating (resistive) 0.3 A 125 VAC or 1 A 30 VDC Maximum Carrying Current 2 A (at 20°C) Maximum Switching Power 62.5 VA or 30 W Max. Switching Voltage*1 250 VAC or 220 VDC Maximum Switching Current 2 A Minimum Switching Load*2 10m VDC - 10µ A Capacitance Approximately 1.0 pF (between open contacts, adjacent contacts ) (at 10 kHz) Approximately1.0 pF (between coil and contacts) Coil Nominal power (at 20 °C) Approximately 50mW Operate power (at 20°C) Approximately 40m W Operating Temperature –40 °C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 5 msec. Release (at nominal voltage) Maximum 5 msec. Insulation Resistance (initial) Minimum 1000 M Ω (at 500 VDC) Dielectric between open contacts 750 VACStrength adjacent contacts 1 minute between coil and contacts1,500 VAC 1 minutes Surge between open 1,500 VStrength contacts, 10 × 700 µs adjacent contacts between coil and contacts2,500 V 2 × 10 µs Life Mechanical 1 x 10 8 operations minimum Electrical DC 2 × 105 operations minimum 5 × 105 operations minimum (at contact rating) AC 1 × 105 operations minimum 200 × 103 operations minimum Other Vibration Misoperation 10 to 55 Hz (double amplitude of 3.3\` mm) Resistance Endurance 10 to 55 Hz (double amplitude of 5.0 mm) Shock Misoperation 500 m/s2 (11±1 ms) Resistance Endurance 1,000 m/s2 ( 6 ±1 ms) Weight Approx. 1.9 g n SPECIFICATIONS *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment.

Nominal Coil current Must Must Nominal Operate Coil resistance (at nominal operate operate temperaturevoltage (±10%) voltage) voltage* 1 voltage*1 power power rise Standard -P type approx. FBR12ND03 FBR12ND03-P 3 VDC 64.3 Ω 46 mA FBR12ND04 FBR12ND04-P 4.5 VDC 145 Ω 31 mA of nominal of nominal0.14 W 0.08 W 20 deg FBR12ND06 FBR12ND06-P 6 VDC 257 Ω 23 mA (at nominal Max. voltage voltage voltage) Max. (at nominal FBR12ND09 FBR12ND09-P 9 VDC 579 Ω 15 mA voltage) FBR12ND12 FBR12ND12-P 12 VDC 1,028 Ω 11 mA FBR12ND24 FBR12ND24-P 24 VDC 2,880 Ω 8 mA 0.2 W 0.112 W 30 deg n COIL DATA CHART *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. MODEL Nominal Nominal Coil current Must Must Nominal Operate Coil resistance (at nominal operate release temperaturevoltage (±10%) voltage) voltage* 1 voltage*1 power power rise Standard -P type approx. FBR12WD03 FBR12WD03-P 3 VDC 39 Ω 77 mA FBR12WD04 FBR12WD04-P 4.5 VDC 88 Ω 51 mA of nominal of nominal0.23 W 0.13 W 30 degFBR12WD06 FBR12WD06-P 6 VDC 156 Ω 38 mA (at nominal (at nominal voltage voltage voltage) Max. voltage) FBR12WD09 FBR12WD09-P 9 VDC 352 Ω 25 mA FBR12WD12 FBR12WD12-P 12 VDC 626 Ω 19 mA FBR12WD24 FBR12WD24-P 24 VDC 2,304 Ω 10 mA 0.25 W 0.14 W 33 deg *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 1.STANDARD 2.HIGH DIELECTRIC STRENGTH MODEL Nominal Coil Must Must Nominal Operate Coil resistance operate release temperature voltage (±10%) voltage* 1 voltage*1 power power rise Standard -P type FBR12HD03 FBR12HD03-P 3 VDC 180 Ω FBR12HD04 FBR12HD04-P 4.5 VDC 405 Ω of nominal of nominal0.05 W 0.04 W 4 degFBR12HD06 FBR12HD06-P 6 VDC 720 Ω (at nominal (at nominal voltage voltage voltage) Max. voltage) FBR12HD09 FBR12HD09-P 9 VDC 1,620 Ω FBR12HD12 FBR12HD12-P 12 VDC 2,880 Ω *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 3. HIGH SENSITIVITY TYPE

Unit: mm n REFERENCE DATA n CHARACTERISTIC DATA Life curve 500 Contact load current (A) 100 (×104) Service life (operations) 0.5 1.0 1.5 2.0 Maximum switching capacity Contact load voltage (V) 0.1 10 20 125 20030 50 0.2 0.3 0.5 1.0 2.0 À Range of operation temperature and voltage Operating temperature (˚C) – 1 00 1 02 03 04 05 06 07 08 0 100 110 120 130 140 150 160 À AC resistive load ( AC contact rating) \` DC resistive load ( DC contact rating) Operating voltage range Must operate voltage Maximum allowable coil voltage (DATA) assumes that the maximum allow- able temperature of E type insulation coil is 115˚C Contact load current (A) Nominal voltage multiplying factor (%)

125 V AC

30 V DC resistive load

(–P)TYPE (–P)TYPE l Dimensions l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) l Tube carrier 14.6+0.4 0.50 (0.95) 9.7+0.33.2 7.2+0.3 0.25 (1.06) 5.08 5.08 2.54 5.08 2.54 8–ø1.00 10.6 Max. 30 pcs/Tube 15.6 Max. 500–2 ]SHOW ONE OUT OF THBSB 3 DIMENSIONS (See NA) Operate Release Distribution of operate and release voltage Rated coil voltage multiplying factor (%) 01 0 2 0 3 0 4 05 06 07 08 0 Distribution (%) Operate Release Distribution of operate and release time Time (ms) 100 0 1 2 3 45678 Contact resistance (mΩ ) Distribution of contact resistance 01 0 2 0 3 0 4 05 06 07 08 0 Distribution (%) Distribution (%)

© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 07/26/2004. Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25

2132 WV Hoofddorp

Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com Fujitsu Components International Headquarter Offices