FBMH1608HL300-T

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS ˙ Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be- fore practical application or usage of the Products. Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor- porating such products, which are caused under the conditions other than those specified in this catalog or indi- vidual specification. ˙ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification is available. ˙ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. ˙ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad- vance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma- rine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil- ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ˙ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu- tors (so called ʠTAIYO YUDENʟs official sales channelʡ). It is only applicable to the products purchased from any of TAIYO YUDENʟ s official sales channel. ˙ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights. ˙ Caution for export Certain items in this catalog may require specific procedures for export according to ʠForeign Exchange and For- eign Trade Control Lawʡ of Japan, ʠU.S. Export Administration Regulationsʡ, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 109 NOISE SUPPRESSION COMPONENTS ／FERRITE BEAD INDUCTORS CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE) REFLOWWAVE chipbeads_e-E02R01 CHIP BEAD INDUCTORS FOR POWER LINES （FB SERIES M TYPE） ■PARTS NUMBER *Operating Temp. : -40～+125℃（Including self-generated heat） F B △ M J 3 2 16 H S 800－T△ △＝Blank space ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ①Series name Code Series name FB Ferrite bead ②Shape Code Shape M Rectangular chip ③Characteristics Code Characteristics J Standard H High Impedance type ④Dimensions（L×W） Code Type（inch） Dimensions 1608 1608（0603） 1.6×0.8 2125 2125（0805） 2.0×1.25 2012 2012（0805） 2016 2016（0806） 2.0×1.6 3216 3216（1206） 3.2×1.6 3225 3225（1210） 3.2×2.5 4516 4516（1806） 4.5×1.6 4525 4525（1810） 4.5×2.5 4532 4532（1812） 4.5×3.2 ⑤Material Code Material HS Refer to impedance curves for material differences HM HL ⑥Nominal impedance Code （example） Nominal impedance［Ω］ 330 33 111 110 132 1300 ⑦Impedance tolerance Code Impedance tolerance － ±25％ N ±30％ ⑧Packaging Code Packaging T Taping ⑨Internal code Code Internal code △ Standard ■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY Recommended Land Patterns Surface Mounting ・Mounting and soldering conditions should be checked beforehand. Type A B C FB MJ1608 1.0 1.0 1.0 FB MJ2125 1.4 1.2 1.65 FB MJ3216 1.4 2.2 2.0 FB MJ4516 1.75 3.5 2.0 FB MH1608 1.0 1.0 1.0 FB MH2012 1.4 1.2 1.65 FB MH2016 1.4 1.2 2.0 FB MH3216 1.4 2.2 2.0 FB MH3225 1.4 2.2 2.9 FB MH4516 1.75 3.5 2.0 FB MH4525 1.75 3.5 2.9 FB MH4532 1.75 3.5 3.7 Unit：mm Type L W T e Standard quantity [pcs] Paper tape Embossed tape FB MJ1608 （0603） 1.6±0.2 （0.063±0.008） 0.8±0.2 （0.031±0.008） 0.8±0.2 （0.031±0.008） 0.3±0.2 FB MJ2125 （0805） 2.0±0.2 （0.079±0.008） 1.25±0.2 （0.049±0.008） 0.85±0.2 （0.033±0.008） 0.5±0.3 FB MJ3216 （1206） 3.2±0.3 （0.126±0.012） 1.6±0.2 （0.063±0.008） 1.1±0.2 （0.043±0.008） 0.5±0.3 FB MJ4516 （1806） 4.5±0.3 （0.177±0.012） 1.6±0.2 （0.063±0.008） 1.1±0.2 （0.043±0.008） 0.5±0.3 FB MH1608 （0603） 1.6±0.1 （0.063±0.004） 0.8±0.1 （0.031±0.004） 0.8±0.1 （0.031±0.004） 0.3±0.15 FB MH2012 （0805） 2.0±0.2 （0.079±0.008） 1.25±0.2 （0.049±0.008） 0.85±0.2 （0.033±0.008） 0.5±0.3 FB MH2016 （0806） 2.0±0.2 （0.079±0.008） 1.6±0.2 （0.063±0.008） 1.6±0.2 （0.063±0.008） 0.5±0.3 FB MH3216 （1206） 3.2±0.3 （0.126±0.012） 1.6±0.2 （0.063±0.008） 1.6±0.2 （0.063±0.008） 0.5±0.3 FB MH3225 （1210） 3.2±0.3 （0.126±0.012） 2.5±0.3 （0.098±0.012） 2.5±0.3 （0.098±0.012） 0.5±0.3 FB MH4516 （1806） 4.5±0.3 （0.177±0.012） 1.6±0.2 （0.063±0.008） 1.6±0.2 （0.063±0.008） 0.5±0.3 FB MH4525 （1810） 4.5±0.4 （0.177±0.016） 2.5±0.3 （0.098±0.012） 2.5±0.3 （0.098±0.012） 0.9±0.6 FB MH4532 （1812） 4.5±0.4 （0.177±0.016） 3.2±0.3 （0.126±0.012） 3.2±0.3 （0.126±0.012） 0.9±0.6 Unit：mm（inch）

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 110 NOISE SUPPRESSION COMPONENTS ／FERRITE BEAD INDUCTORS ■PARTS NUMBER Standard type

• FB MJ1608 FB MJ1608HS280NT RoHS 28 ±30％ 100 0.007 4.0 0.8 ±0.2 FB MJ1608HM230NT RoHS 23 ±30％ 100 0.007 4.0 0.8 ±0.2
• FB MJ2125 FB MJ2125HS250NT RoHS 25 ±30％ 100 0.004 6.0 0.85 ±0.2 FB MJ2125HS420-T RoHS 42 ±25％ 100 0.008 4.0 0.85 ±0.2 FB MJ2125HM210NT RoHS 21 ±30％ 100 0.004 6.0 0.85 ±0.2 FB MJ2125HM330-T RoHS 33 ±25％ 100 0.008 4.0 0.85 ±0.2 FB MJ2125HL8R0NT RoHS 8 ±30％ 100 0.008 4.0 0.85 ±0.2
• FB MJ3216 FB MJ3216HS480NT RoHS 48 ±30％ 100 0.005 6.0 1.1 ±0.2 FB MJ3216HS800-T RoHS 80 ±25％ 100 0.010 4.0 1.1 ±0.2 FB MJ3216HM380NT RoHS 38 ±30％ 100 0.005 6.0 1.1 ±0.2 FB MJ3216HM600-T RoHS 60 ±25％ 100 0.010 4.0 1.1 ±0.2 FB MJ3216HL160NT RoHS 16 ±30％ 100 0.012 4.0 1.1 ±0.2
• FB MJ4516 FB MJ4516HS720NT RoHS 72 ±30％ 100 0.007 6.0 1.1 ±0.2 FB MJ4516HS111-T RoHS 110 ±25％ 100 0.014 4.0 1.1 ±0.2 FB MJ4516HM560NT RoHS 56 ±30％ 100 0.007 6.0 1.1 ±0.2 FB MJ4516HM900-T RoHS 90 ±25％ 100 0.014 4.0 1.1 ±0.2 FB MJ4516HL230NT RoHS 23 ±30％ 100 0.014 3.5 1.1 ±0.2 High impedance type
• FB MH1608 FB MH1608HM470-T RoHS 47 ±25％ 100 0.020 3.5 0.8 ±0.1 FB MH1608HM600-T RoHS 60 ±25％ 100 0.025 3.0 0.8 ±0.1 FB MH1608HM101-T RoHS 100 ±25％ 100 0.035 2.5 0.8 ±0.1 FB MH1608HM151-T RoHS 150 ±25％ 100 0.050 2.1 0.8 ±0.1 FB MH1608HM221-T RoHS 220 ±25％ 100 0.070 1.8 0.8 ±0.1 FB MH1608HM331-T RoHS 330 ±25％ 100 0.130 1.2 0.8 ±0.1 FB MH1608HM471-T RoHS 470 ±25％ 100 0.150 1.0 0.8 ±0.1 FB MH1608HM601-T RoHS 600 ±25％ 100 0.170 0.9 0.8 ±0.1 FB MH1608HM102-T RoHS 1000 ±25％ 100 0.350 0.6 0.8 ±0.1 FB MH1608HL300-T RoHS 30 ±25％ 100 0.028 2.6 0.8 ±0.1 FB MH1608HL600-T RoHS 60 ±25％ 100 0.045 2.1 0.8 ±0.1 FB MH1608HL121-T RoHS 120 ±25％ 100 0.130 1.2 0.8 ±0.1 FB MH1608HL221-T RoHS 220 ±25％ 100 0.170 0.9 0.8 ±0.1 FB MH1608HL331-T RoHS 330 ±25％ 100 0.210 0.8 0.8 ±0.1 FB MH1608HL471-T RoHS 470 ±25％ 100 0.350 0.6 0.8 ±0.1 FB MH1608HL601-T RoHS 600 ±25％ 100 0.450 0.5 0.8 ±0.1
• FB MH2012 FB MH2012HM800-T RoHS 80 ±25％ 100 0.025 2.7 0.85 ±0.2 FB MH2012HM121-T RoHS 120 ±25％ 100 0.032 2.5 0.85 ±0.2 FB MH2012HM221-T RoHS 220 ±25％ 100 0.060 2.0 0.85 ±0.2 FB MH2012HM331-T RoHS 330 ±25％ 100 0.080 1.8 0.85 ±0.2
• FB MH2016 FB MH2016HM121NT RoHS 120 ±30％ 100 0.015 4.5 1.6 ±0.2 FB MH2016HM251NT RoHS 250 ±30％ 100 0.050 2.0 1.6 ±0.2
• FB MH3216 FB MH3216HM221NT RoHS 220 ±30％ 100 0.020 4.0 1.6 ±0.2 FB MH3216HM501NT RoHS 500 ±30％ 100 0.070 2.0 1.6 ±0.2
• FB MH3225 FB MH3225HM601NT RoHS 600 ±30％ 100 0.042 3.0 2.5 ±0.3 FB MH3225HM102NT RoHS 1000 ±30％ 100 0.100 2.0 2.5 ±0.3 FB MH3225HM202NT RoHS 2000 ±30％ 100 0.130 1.2 2.5 ±0.3 Parts number EHS Nominal impedance （Ω） Impedance tolerance Rated current ［A］（max.） Thickness ［mm］ Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Rated current ［A］（max.） Thickness ［mm］Parts number EHS Nominal impedance （Ω） Impedance tolerance Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Rated current ［A］（max.） Thickness ［mm］Parts number EHS Nominal impedance （Ω） Impedance tolerance Parts number EHS Nominal impedance （Ω） Impedance tolerance Parts number EHS Nominal impedance （Ω） Impedance tolerance Rated current ［A］（max.） Thickness ［mm］ Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Rated current ［A］（max.） Thickness ［mm］ Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Rated current ［A］（max.） Thickness ［mm］ Parts number EHS Nominal impedance （Ω） Impedance tolerance Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Parts number EHS Rated current ［A］（max.） Thickness ［mm］ Parts number EHS Nominal impedance （Ω） Impedance tolerance Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Parts number EHS Nominal impedance （Ω） Impedance tolerance Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Nominal impedance （Ω） Impedance tolerance Rated current ［A］（max.） Thickness ［mm］ Rated current ［A］（max.） Thickness ［mm］ Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） chipbeads_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 111 NOISE SUPPRESSION COMPONENTS ／FERRITE BEAD INDUCTORS ■PARTS NUMBER

• FB MH4516 FB MH4516HM851NT RoHS 850 ±30％ 100 0.100 1.5 1.6 ±0.2
• FB MH4525 FB MH4525HM102NT RoHS 1000 ±30％ 100 0.060 3.0 2.5 ±0.3 FB MH4525HM162NT RoHS 1600 ±30％ 100 0.130 2.0 2.5 ±0.3
• FB MH4532 FB MH4532HM681-T RoHS 680 ±25％ 100 0.028 4.0 3.2 ±0.3 FB MH4532HM132-T RoHS 1300 ±25％ 100 0.060 3.0 3.2 ±0.3 FB MH4532HM202-T RoHS 2000 ±25％ 100 0.130 1.3 3.2 ±0.3
• High current type FB MJ1608HS220NTR RoHS 22 ±30％ 100 0.004 7.5 0.8 ±0.2 FB MJ1608HS280NTR RoHS 28 ±30％ 100 0.006 6.0 0.8 ±0.2 FB MJ1608HM180NTR RoHS 18 ±30％ 100 0.004 7.5 0.8 ±0.2 FB MJ1608HM230NTR RoHS 23 ±30％ 100 0.006 6.0 0.8 ±0.2 Measuring frequency ［MHz］ DC Resistance ［Ω］（max.）Parts number EHS Nominal impedance （Ω） Impedance tolerance Rated current ［A］（max.） Thickness ［mm］ Parts number EHS Nominal impedance （Ω） Impedance tolerance Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Rated current ［A］（max.） Thickness ［mm］ Rated current ［A］（max.） Thickness ［mm］Parts number EHS Nominal impedance （Ω） Impedance tolerance Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Rated current ［A］（max.） Thickness ［mm］Parts number EHS Nominal impedance （Ω） Impedance tolerance Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） chipbeads_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 112 NOISE SUPPRESSION COMPONENTS ／FERRITE BEAD INDUCTORS ˙ ELECTRICAL CHARACTERISTICS ■ FB MJ1608 ■ FB MJ2125 ■ FB MJ3216 FB MJ3216HL160NT FB MJ4516HL230NT 100 ■ FB MJ4516

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 113 NOISE SUPPRESSION COMPONENTS ／FERRITE BEAD INDUCTORS ˙ ELECTRICAL CHARACTERISTICS 1600 1400 1200 1000 800 600 400 200 01 10010 1000 10000 FB MH1608HM102-T Z R X 1000 900 800 700 600 500 400 300 200 100 01 10010 1000 10000 FB MH1608HL221-T Z X R 400 350 300 250 200 150 100 01 10010 1000 10000 FB MH2012HM800-T Z X R 200 180 160 140 120 100 01 100 100010 10000 FB MH2016HM121NT Z R X 350 300 250 200 150 100 01 100 100010 10000 FB MH3216HM221NT Z R X 800 600 400 200 01 10010 1000 FB MH2016HM251NT Z R X 800 600 400 200 01 10010 1000 FB MH3216HM501NT X Z R 400 350 300 250 200 150 100 01 10010 1000 10000 FB MH2012HM121-T Z X R 400 350 300 250 200 150 100 01 10010 1000 10000 FB MH2012HM221-T Z X R 800 600 400 200 01 10010 1000 10000 FB MH2012HM331-T Z X R 1400 1200 1000 800 600 400 200 1 10010 1000 10000 FB MH1608HL331-T Z R X 2000 1800 1600 1400 1200 1000 800 600 400 200 01 10010 1000 10000 FB MH1608HL471-T Z R X 2500 2000 1500 1000 500 1 10010 1000 10000 FB MH1608HL601-T Z R X 300 250 200 150 100 01 10010 1000 10000 FB MH1608HL300-T Z X R 300 250 200 150 100 01 10010 1000 10000 FB MH1608HL600-T Z R X 600 500 400 300 200 100 01 10010 1000 10000 FB MH1608HL121-T Z R X 200 180 160 140 120 100 01 100 100010 10000 FB MH1608HM470-T Z R X 200 180 160 140 120 100 01 100 100010 10000 FB MH1608HM600-T Z R X 200 180 160 140 120 100 01 10010 1000 10000 FB MH1608HM101-T Z R X 600 500 400 300 200 100 01 10010 1000 10000 FB MH1608HM151-T Z R X Standard type 600 500 400 300 200 100 01 10010 1000 10000 FB MH1608HM221-T Z X R 600 500 400 300 200 100 01 10010 1000 10000 FB MH1608HM331-T Z R X 1600 1400 1200 1000 800 600 400 200 01 10010 1000 10000 FB MH1608HM471-T Z R X 1600 1400 1200 1000 800 600 400 200 01 10010 1000 10000 FB MH1608HM601-T Z R X ■ FB MH1608 ■ FBMH2012 ■ FB MH2016 ■ FB MH3216

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 114 NOISE SUPPRESSION COMPONENTS ／FERRITE BEAD INDUCTORS 1200 1000 200 800 600 400 01 10010 1000 FB MH4516HM851NT R X Z 1200 1000 200 800 600 400 01 10010 1000 FB MH3225HM601NT R X Z 01 10010 1000 10000 FB MJ1608HS220NTR Z R X ˙ ELECTRICAL CHARACTERISTICS Standard type 1200 1000 200 800 600 400 01 10010 1000 FB MH3225HM102NT Z R X 1800 1600 1400 1200 1000 200 800 600 400 0 1 10010 1000 FB MH4532HM681-T Z R X 1800 1600 1400 1200 1000 200 800 600 400 01 10010 1000 FB M4532HM132-T Z R X 2500 2000 1500 1000 500 1 10010 1000 FB M4532HM202-T X Z R 2500 2000 1500 1000 500 01 10010 1000 FB MH3225HM202NT R X Z 01 10010 1000 10000 FB J1608HM180NTR Z R X 1800 1600 1400 1200 1000 200 800 600 400 01 10010 1000 FB MH4525HM102NT R X Z 1800 1600 1400 1200 1000 200 800 600 400 0 1 10010 1000 FB MH4525HM162NT Z R X ■ FB MH3225 ■ High current type ■ FB MH4525 ■ FB MH4532 ■ FB MH4516

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipbeads_pack_e-E02R01 CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE) ■PACKAGING ①Minimum Quantity Type Standard Quantity［pcs］ Paper Tape Embossed Tape 1608（0603） 4000 － 2125（0805） 4000 － 2012（0805） 4000 － 2016（0806） － 2000 3216（1206） － 2000 3225（1210） － 1000 4516（1806） － 2000 4525（1810） － 1000 4532（1812） － 2000 ②Tape Material

• Card board carrier tape Top tape Base tape Sprocket hole Bottom tape Chip cavity Chip Chip Filled
• Embossed tape Top tape Base tape Sprocket hole Chip cavity Chip Chip Filled ③Taping Dimensions
• Paper tape (0.315 inches wide)

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipbeads_pack_e-E02R01 Type Chip Cavity Insertion Pitch Tape Thickness A B F T FBMJ1608 FBMH1608 （0603） 1.0±0.2 （0.039±0.008） 1.8±0.2 （0.071±0.008） 4.0±0.2 （0.157±0.008） 1.1max （0.043max） FBMJ2125 FBMH2012 （0805） 1.5±0.2 （0.059±0.008） 2.3±0.2 （0.091±0.008） 4.0±0.2 （0.157±0.008） 1.1max （0.043max） Unit : mm（inch）

• Embossed tape (0.315 inches wide) Type Chip Cavity Insertion Pitch Tape Thickness A B F K T FBMH2016 （0806） 1.8±0.2 （0.071±0.008） 2.2±0.2 （0.087±0.008） 4.0±0.2 （0.157±0.008） 2.6max （0.102max） 0.6max （0.024max） FBMJ3216 （1206） 1.9±0.2 （0.075±0.008） 3.5±0.2 （0.138±0.008） 4.0±0.2 （0.157±0.008） 1.5max （0.059max） 0.3max （0.012max） FBMH3216 （1206） 1.9±0.2 （0.075±0.008） 3.5±0.2 （0.138±0.008） 4.0±0.2 （0.157±0.008） 2.6max （0.102max） 0.6max （0.024max） FBMH3225 （1210） 2.8±0.2 （0.110±0.008） 3.5±0.2 （0.138±0.008） 4.0±0.2 （0.157±0.008） 4.0max （0.157max） 0.6max （0.024max） Unit : mm（inch）
• Embossed tape (0.472 inches wide) Type Chip Cavity Insertion Pitch Tape Thickness A B F K T FBMJ4516 （1806） 1.9±0.2 （0.075±0.008） 4.9±0.2 （0.193±0.008） 4.0±0.2 （0.157±0.008） 1.5max （0.059max） 0.3max （0.012max） FBMH4516 （1806） 1.9±0.2 （0.075±0.008） 4.9±0.2 （0.193±0.008） 4.0±0.2 （0.157±0.008） 2.6max （0.102max） 0.6max （0.024max） FBMH4525 （1810） 2.9±0.2 （0.114±0.008） 4.9±0.2 （0.193±0.008） 4.0±0.2 （0.157±0.008） 4.0max （0.157max） 0.6max （0.024max） FBMH4532 （1812） 3.6±0.2 （0.142±0.008） 4.9±0.2 （0.193±0.008） 8.0±0.2 （0.315±0.008） 4.0max （0.157max） 0.6max （0.024max） Unit : mm（inch）

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipbeads_pack_e-E02R01 ④Leader and Blank portion ⑤Reel size 2.0±0.5 （0.079±0.020） φ21.0±0.8 （φ0.827±0.031） φ13.0±0.5 （φ0.512±0.020） R1.0 φd t φD W Type φD φd W t FBMJ1608 180＋0/－3 （7.09＋0/－0.118 ） 60＋1/－0 （2.36＋0.039/－0 ） 10.0±1.5 （0.394±0.059） 2.5max (0.098max) FBMJ2125 FBMJ3216 FBMJ4516 14.0±1.5 （0.551±0.059） FBMH1608 10.0±1.5 （0.394±0.059） FBMH2012 FBMH2016 FBMH3216 FBMH3225 FBMH4516 14.0±1.5 （0.551±0.059） FBMH4525 FBMH4532 330±2.0 （12.99±0.080） 100±1.0 （3.94±0.039） 14.0±2.0 （0.551±0.080） 3.0max (1.181max) Unit : mm（inch） ⑥Top tape strength The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipbeads_reli_e-E02R01 CHIP BEAD INDUCTORS FOR POWER LINE (FB SERIES M TYPE) ■RELIABILITY DATA 1. Operating Temperature Range Specified Value －40℃～＋125℃ Including self-generated heat 2. Storage Temperature Range Specified Value －40℃～＋85℃ Test Methods and Remarks *Note: -5 to ＋40℃ in taped packaging 3. Impedance Specified Value Within th e specified tolerance Test Methods and Remarks Measuring equipment : Impedance analyzer (HP4291A) or its equi valent Measuring frequency : 100±1 MHz 4. DC Resistance Specified Value Within the specified range Test Methods and Remarks Four-terminal method Measuring equipment : Milliohm High-Tester 3226 (Hioki Denki) or its equivalent 5. Rated Current Specified Value Within the specified range 6. Vibration Specified Value Appearance : No significant abnormality Impedance change : Within ±30% of the initial value Test Methods and Remarks According to JIS C 0040. Vibration type : A Time : 2 hrs each in X,Y, and Z directions Total: 6 hrs Frequency range : 10 to 55 to 10Hz (/min.) Amplitude : 1.5 mm (shall not exceed acceleration 196m/s Mounting method : Sold ering onto PC board 7. Solderability Specified Value 90% or more of imm ersed surface of terminal electrode shall be covered with fresh solder. Test Methods and Remarks Solder temperature : 230±5℃ Immersion time : 4±1 sec. Preconditioning : Immersion into flux. Immersion and Removal speed : 25mm/sec. 8. Resistance to Soldering Heat Specified Value Appearance : No significant abnormality Impedance change : Within ±30% of the initial value Test Methods and Remarks Preheating : 150℃ for 3 min. Resistance to Soldering Heat : 260±5℃ Duration : 10±0.5 sec. Preconditioning : Immersion into flux. Immersion and Removal speed : 25mm/sec. Recovery : 2 to 3 hrs of recovery under the standard condition after the test.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipbeads_reli_e-E02R01 9. Thermal Shock Specified Value Appearance : No significant abnormality Impedance change : Within＋50/－ 10% of the initial value Test Methods and Remarks According to JIS C 0025. Conditions for 1 cycle Step Temperature (℃) Duration (min.) 1 －40±3℃ 30±3

2 Room Temperature Within 3

3 85±2℃ 30±3

4 Room Temperature Within 3

Number of cycles : 100 Mounting method : Sold ering onto PC board Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber. 10. Resistance to Humidity (steady state) Specified Value Appearances : No significant abnormality Impedance change : Within ±30% of the initial value Test Methods and Remarks Temperature : 40±2℃ Humidity : 90 to 95% RH Duration : 500＋24/－0 Mounting method : Sold ering onto PC board Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber. 11. Loading under Damp Heat Specified Value Appearance No significant abnormality Impedance change Within ±30% of the initial value Test Methods and Remarks Temperature : 40±2℃ Humidity : 90 to 95%RH Applied current : Rated current Duration : 500＋24/－0 hrs Mounting method : Sold ering onto PC board Recovery : 2 to 3hrs of recovery under the standard condition after the removal from test chamber. 12. High Temperature Loading Test Specified Value Appearance : No significant abnormality Impedance change : Within ±30% of the initial value Test Methods and Remarks Temperature : 85±2℃ Duration : 500＋24/－0 hrs Applied current : Rated current Mounting method : Sold ering onto PC board Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber. 13. Bending Strength Specified Value Appearance : No mechanical damage. Test Methods and Remarks Warp : 2mm Testing board : Glass epoxy-resin substrate Thickness : 0.8mm

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipbeads_reli_e-E02R01 14. Adhesion of Electrode Specified Value No separation or indication of separation of electrode. Test Methods and Remarks Applied force : 5N Duration : 10 sec. Note on standard condition: "standard condition" referred to herein is defined as follows: 5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure. When there are questions concerning measurement results: In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity and 86 to 106kPa of air pressure. Unless otherwise specified, all the tests are conducted under the "standard condition."

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipbeads_prec_e-E02R01 CHIP BEAD INDUCTORS FOR POWER LINE （FB SERIES M TYPE） ■PRECAUTIONS 1. Circuit Design Precautions ◆Operating environment 1. The products described in this specification are intended fo r use in general electronic equi pment, (office supply equipment , telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high reliabi lity (traffic systems, safety equipment, aerospace systems, nuc lear control systems and medical equipment including life-support sy stems,) where product failure might result in loss of life, inj ury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. ◆Rated current 1. Rated current of this product is shown in this catalogue, but please be sure to have the base board designed with adequate inspection in case of the generation of heat becomes high within the rated current range when the base board is in high resistance or in bad heating conditions. 2. PCB Design Precautions ◆Land pattern design 1. Please refer to a recommended land pattern. 3. Considerations for automatic placement Precautions ◆Adjustment of mounting machine 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mounting and soldering conditions should be checked beforehand. Technical considerations ◆Adjustment of mounting machine 1. When installing products, care should be taken not to apply distortion stress as it may deform the products. 4. Soldering Precautions ◆Wave soldering 1. Please refer to the specifications in the catalog for a wave soldering. ◆Reflow soldering 1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified. ◆Lead free soldering 1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering heat, etc. sufficiently. ◆Preheating when soldering Heating : The temperature difference between soldering and remaining heat should not be greater than 150℃. Cooling : The temperature difference between the components and cleaning process should not be greater than 100℃. ◆Recommended conditions for using a soldering iron Put the soldering iron on the land-pattern. Soldering iron's temperature - Below 350℃ Duration - 3 seconds or less The soldering iron should not directly touch the inductor. Technical considerations ◆Wave, Reflow, Lead free soldering 1. If products are used beyond the range of the recommended con ditions, heat stresses may deform the products, and consequentl y degrade the reliability of the products. 【Recommended reflow condition】 ◆Preheating when soldering 1. There is a case that products get damaged by a heat shock. ◆Recommended conditions for using a soldering iron 1. If products are used beyond the range of the recommended con ditions, heat stresses may deform the products, and consequentl y degrade the reliability of the products.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipbeads_prec_e-E02R01 5. Handling Precautions ◆Handling 1. Keep the inductors away from all magnets and magnetic objects. ◆Setting PC boards 1. When setting a chip mounted base board, please make sure tha t there is no residual stress to the chip by distortion in the board or at screw part. ◆Breakaway PC boards (splitting along perforations) 1. When splitting the PC board after mounting inductors, care s hould be taken not to give any stresses of deflection or twisti ng to the board. 2. Board separation should not be done manually, but by using the appropriate devices. ◆Mechanical considerations 1. Please do not give the inductors any excessive mechanical shocks. Technical considerations ◆Handling 1. There is a case that a characteristic varies with magnetic influence. ◆Setting PC boards 1. There is a case that a characteristic varies with residual stress. ◆Breakaway PC boards (splitting along perforations) 1. Planning pattern configurations and the position of products should be carefully performed to minimize stress. ◆Mechanical considerations 1. There is a case to be damaged by a mechanical shock. 6. Storage conditions Precautions ◆Storage 1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. ・Recommended conditions Ambient temperature 0～40℃ Humidity Below 70% RH The ambient temperature must be kept below 30℃. Even under idea l storage conditions, solderab ility of products electrodes may decrease as time passes. For this reason, inductors should be used within 6 months from the time of delivery. Technical considerations ◆Storage 1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place.