FBM11PT CHENMKO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT GLASS PASSIVATED FAST RECOVERY SILICON RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) NOTES : Maximum Full Load Reverse Current Average, Full Cycle at TA = 55oC CHARACTERISTICS SYMBOL UNITS 1.3 5.0 150 250 500 uAmps 100 uAmps nSec VoltsMaximum Instantaneous Forward Voltage at 1.0 A DC Maximum DC Reverse Current at Rated DC Blocking Voltage at TA = 25oC MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TL = 110oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 1) Maximum Thermal Resistance Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO CJ R JA VF Maximum Reverse Recovery Time (Note 4) trr IR TJ, TSTG IFSM FBM11PT Volts Volts Volts Amps FBM13PT 200 140 200 FBM14PT 280 400 400 FBM15PT 600 420 600 FBM16PT 800 560 800 FBM17PT 1000 700 1000 1.0 -65 to +150 Amps pF oC / W oC / W oC 100 100 R JL 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance Junction to terminal 6.0 mm2 copper pads to each terminal 3. Thermal Resistance Junction to ambient 6.0 mm2 copper pads to each terminal 4. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A (Note 2) (Note 3) 2004-10 FBM12PT UNITS FBM12PTFBM11PT FBM13PT FBM14PT FBM15PT FBM16PT FBM17PT (1)
FEATURES
(2) * Low leakage current * Ideal for surface mounted applications * Metallurgically bonded construction * Fast recovery times for high efficiency * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * High temperature soldering guaranteed : 260oC/10 seconds at terminals Case: JEDEC SMB molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band Weight: 0.003 ounces, 0.093 gram MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 H Z, resistive or inductive load. For capacitive load, derate current by 20%. SMB SMBDimensions in inches and (millimeters) 0.155 (3.94) 0.130 (3.30) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.012 (0.305) 0.006 (0.152) 0.190 (4.75) 0.160 (4.06) 0.083 (2.11) 0.077 (1.96) 0.220 (5.59) 0.205 (5.21)
RATING CHARACTERISTIC CURVES ( FBM11PT THRU FBM17PT ) FIG. 1 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC FIG. 3 - TYPICAL REVERSE CHARACTERISTICS FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 6 - TYPICAL JUNCTION CAPACITANCEFIG. 5 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT INSTANTANEOUS REVERSE CURRENT, (uA)PEAK FORWARD SURGE CURRENT, ( A ) JUNCTION CAPACITANCE, ( pF ) REVERSE VOLTAGE, ( V )NUMBER OF CYCLES AT 60 Hz INSTANTANEOUS FORWARD VOLTAGE, ( V )PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) INSTANTANEOUS FORWARD CURRENT, ( A ) NONINDUCTIVE NONINDUCTIVE D.U.T( + )
25 Vdc
(approx) ( - ) 1 NON- INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) ( - ) ( + ) NOTES: 1. Rise Time = 7 ns max. Input Impedance = 1 megohm. 22 pF. 2. Rise Time = 10 ns max. Source Impedlance= 50 ohms. +0.5A -0.25A -1.0A trr 1cm SET TIME BASE FOR 50/100 nS/cm AVERAGE FORWARD CURRENT, ( A ) LEAD TEMPERATURE ( O C ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE Single Phase Half Wave 60Hz Resistive or Inductive Load 1.50 1.00 .25 .50 .75 1.25 250 50 75 100 125 150 175 1.0 0.1 .01 Pulse Width = 300uS 1% Duty Cycle TJ =25oC TJ =25oC TJ =25oC TJ =100oC .01 .04 1.0 4.0 100 200 100 .1 .2 .4 1.0 2 4 10 20 40 1001 2 5 10 20 50 100 8.3ms Single Half Sine-Wave (JEDEC Method) 50 10