FB15ANEP2-FA NKK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 .5 Amp Momentary Pushbuttons Series FB Distinctive Characteristics Optional caps in different colors to vary appearance as needed. Low operating force for ease of actuation. Rear panel bushing mount with compact behind panel dimension. Internal antijamming feature to protect the contacts from damage due to excessive force on the plunger. Self-cleaning contacts make FB models highly reliable. Low cost device of rugged one-piece bushing and housing construction. Reliability of construction with an internal guide to maintain contact alignment. Epoxy sealed terminals. Actual Size

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 .5 Amp Momentary Pushbuttons Series FB General Specifications FB Series Electrical Capacity (Resistive Load) Power Level: 500mA @ 125V AC for silver Logic Level: 0.4VA max. @ 28V AC/DC max. for gold (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation in Supplement section. Other Ratings Contact Resistance: 30 milliohms maximum for silver; 30 milliohms maximum for gold Insulation Resistance: 100 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts & between contacts & case for 1 minute minimum Mechanical Life: 50,000 operations minimum Electrical Life: 50,000 operations minimum Nominal Operating Force: 2.16N Travel: Pretravel .043” (1.1mm) Overtravel .022” (0.57mm) Total Travel .065” (1.67mm) Materials & Finishes Plunger: Polyacetal Bushing: Brass with nickel plating Case: Phenolic resin Movable Contactor: Copper with silver or gold plating Stationary Contacts: Phosphor bronze with silver or gold plating Terminals: Phosphor bronze with silver or gold plating Environmental & Installation Data Operating Temp Range: –10°C through +70°C (+14°F through +158°F) Soldering Time & Manual Soldering: Temperature: See Profile A in Supplement section. Standards & Certifications UL Recognized: Models rated 0.5A @ 125V AC Single pole; Momentary action circuit with solder lug terminations. UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch. C-UL Recognized: Models rated 0.5A @ 125V AC Single pole; Momentary action circuit with solder lug terminations. C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch. R

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 .5 Amp Momentary Pushbuttons Series FB CAP COLORS A Black B White C Red TYPICAL SWITCH ORDERING EXAMPLE AEP FFB SPST OFF-(ON) CircuitSilver Contacts & 500-Milliamp Rating Plunger Position ( ) = Momentary Connected Terminals Throw & Switch Schematics Pole Model Normal Down Normal Down Note: Terminal numbers are not actually on the switch. SP FB15AN OFF (ON) OPEN 1-2 SPST POLE & CIRCUIT 15AN SPST OFF (ON) ( ) = Momentary IMPORTANT: Switches are supplied without UL & C-UL markings unless specified. Specific models & ratings noted on General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE FB15ANEP2-FA POLE & CIRCUIT CAPS F .201” (5.1mm) Dia. H .295” (7.5mm) Dia. CONTACT MATERIALS & RATINGS

2 Silver Contacts

500mA @ 125V AC

4 Gold Contacts

0.4V A max. @ 28V AC/DC max. .201” (5.1mm) Diameter Black Cap 15AN TERMINALS EP Epoxy Sealed PC/Turret P No Epoxy PC/Turret Epoxy Sealed PC/Turret Terminals 1 2

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 .5 Amp Momentary Pushbuttons Series FB CONTACT MATERIALS & RATINGS Silver Contacts Power Level 500mA @ 125V AC AT536 Hex Nut Material: Brass with nickel plating 4 Gold Contacts Logic Level 0.4VA maximum @ 28V AC/DC maximum No Epoxy PC/Turret Terminals Epoxy Sealed PC/Turret Terminals Material: Polyamide Finish: Glossy PEP TERMINALS TYPICAL SWITCH DIMENSIONS PC/Turret FB15ANEP2-FA Plunger is white polyacetal. SLIP-ON CAPS & COLORS AT496 .295” (7.5mm) Diameter AT475 .201” (5.1mm) Diameter H Panel Thickness: .110” (2.8mm) maximum Material: Polyamide Finish: Glossy F A B CBlack White RedColors Available: STANDARD HARDWARE & PANEL CUTOUT (5.1) Dia .201 (7.0) Dia .276 (4.0) .157 M5 P0.5 (1.2) .047 (5.0) Dia .197 (2.7) .106 (5.0) .197 (5.9) .232 (4.0) .157 (11.8) .465 (2.8) Dia .110 (2.54) .100 (0.15) Typ .006 (5.1) Dia .201 (4.0) .157(5.9) .232 (7.5) Dia .295 (4.0) .157(5.9) .232 (7.0) .276 M5 P0.5 (8.0) .315 (1.2) .047 (5.3) Dia .209 Complete explanation of operating range in Supplement section.