FAR5000 EIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FAR5000 - FAR5010 FAST RECOVERY AUTOMOTIVE RECTIFIER PRV : 50 - 1000 Volts Io : 50 Amperes FEATURES : * High current capability * High surge current capability * High reliability * Low reverse current * Low forward voltage drop * Fast switching for high efficiency * Pb / RoHS Free MECHANICAL DATA : * Case : Molded plastic * Epoxy : UL94V-O rate flame retardant * Terminals : Terminal are readily solderable * Polarity : Cathode polarity band * Mounting position : Any * Weight : 1.84 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL FAR 5000 FAR 5001 FAR 5002 FAR 5004 FAR 5006 FAR 5008 FAR
5010 UNIT
Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage V RMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage V DC 50 100 200 400 600 800 1000 V Average Rectified Forward Current Tc = 150°C IF(AV) 50 A Peak Forward Surge Current Single half sine wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage at I F = 50 Amps. VF 1.3 V Maximum DC Reverse Current Ta = 25 °C IR 10 μA at rated DC Blocking Voltage Ta = 100 °C IR(H) 1.0 mA Maximum Reverse Recovery Time ( Note 1 ) Trr 150 250 500 ns Thermal Resistance (Note 1) RθJC 0.8 °C/W Junction Temperature Range T J - 65 to + 175 °C Storage Temperature Range T STG - 65 to + 175 °C Notes : (1) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. (2) Thermal resistance from junction to case. Single side cooled. Page 1 of 2 Rev. 02 : March 24, 2005 RATING IFSM 500 A Dimensions in inches and (millimeters) 0.410 (10.4) 0.380 (9.70) 0.185 (4.7) 0.165 (4.2) 0.250 (6.4) 0.235 (6.0) 0.225 (5.7) 0.215 (5.5) 5° NOM BUTTON CASE www.eicsemi.com
RATING AND CHARACTERISTIC CURVES ( FAR5000 - FAR5010 ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF. 2. Rise time = 10 ns max., Source Impedance = 50 ohms. 3. All Resistors = Non-inductive Types. FIG.2 - DERATING CURVE FOR OUTPUT FIG.3 - MAXIMUM NON-REPETITIVE PEAK RECTIFIED CURRENT FORWARD SURGE CURRENT 130 140 150 160 170 180 190 200 1 2 4 6 10 20 40 60 100 CASE TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 01 : July 22, 2005 60Hz, SINE WAVER, ESISTIVE LOAD 100 10 1.0 400 500 300 200 100 0.1 0.01 1.0 0.1 100 1400 20 40 60 120 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FORWARD CURRENT, AMPERES REVERSE CURRENT, MICROAMPERES Ta = 25 °C Ta = 100 °C TJ = 25 °C Pulse Width = 300 μs 2% Duty Cycle Tc = 55 °C + 0.5 A - 0.25 A - 1.0 A Trr 1 cm SET TIME BASE FOR 50-100 ns/cm 1 Ω 50 Ω 10 Ω PULSE GENERATOR ( NOTE 2 ) OSCILLOSCOPE ( NOTE 1 ) D.U.T.
50 Vdc
(approx) PERCENT OF RATED REVERSE VOLTAGE, (%) www.eicsemi.com