FAR-C4CG-11000-M

FAR-C4CG-08000-M05 FUJITSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Piezoelectric Resonator (8 to 16 MHz) FAR Family (C4 series G type) n DESCRIPTION Fujitsu resonators C4 series (G type) feature originally developed single crystals with a high electromechanical coefficient (LiNbO3 lithium niobate), the result is ultra compact packaging. C4 series (G type) with built-in capacitors for exclusive use in microcomputer clocks, and this series is chip type device for surface-mount. n FEATURES

• Ultra compact package.
• Wide frequency range in 8 to 16 MHz.
• C4 (G type), with built-in capacitors, is the best suited to the source of microcomputer clocks.
• C4 (G type) can be shipped in emboss-typed packages for automatic mounting.
• The resonators have superior shock and vibration resistance, preventing damage during automatic mounting process. n PACKAGE

FAR Family (C4 series G type) n STANDARD CHARACTERISTICS Series C4 series (G type) Remarks Parameter Material Lithium Niobate (LiNbO 3) Frequency 8 to 16 MHz Standard frequency See “ n Standard Frequency.” Initial frequency deviation ±0.5% (µ) Temperature characteristics (–20°C to 60°C) ±0.5% Capacity of built-in capacitor 20±8 pF (Standard) 10±4 pF type are also available. However, the characteristics of 10±4 pF type should be specified by Fujitsu, considering matching data with applied IC (mainly microcomputer.) Aging stability Within ±0.1% Operating temperature –30 °C to +85°C Storage temperature –40 °C to +100°C Standard measuring circuit

8 MHz to 10 MHz

IC: 1/6 MB84069B x 2

10 MHz to 16 MHz

IC: 1/6 MC74HC04 x 2

• VCC =5 V DC
• R : Resonator
• C 1, C2 : Loading capacitance (built-in) (1) Oscillation frequency (2) Serial resonant resistance Measuring equipment: Network analyzer R: Resonator R

75 W 75 WC 1 C 2

FAR Family (C4 series G type) n STANDARD FREQUENCY Note: • For oscillation frequency (in 8 to 16 MHz) other than standard, Fujitsu can also develop applicable part.

• Resonant resistance of the part is specified according to applied frequency as above. n NOTES ON USE
• Handle carefully
• Solder under the following conditions. 5 seconds max. at 230°C (PCB) Do not apply extreme heat to the resonator. Recommended preheating is 150°C for one minute.
• Avoid extreme fluctuations in temperature during use.
• There is no specific direction in resonator mounting.
• Oscillation data should be examined when used in oscillation circuit with micon or other ICs.
• This is for reflow solder, not for flow solder. Standard frequency (KHz) Package size Resonant resistance 8,000 10,000 G1 0 0 W max. (Symbol: 5) 11,000 11,059 12,000 16,000 G 75 W max. (Symbol: 2)

FAR Family (C4 series G type) n PART NUMBERING SYSTEM (1) Series (2) Package T ype (3) Package Size (4) Frequency (KHz) See “n Standard Frequency.” [Example] 8.0 MHz 08000 (5) Initial Frequency Deviation (6) Built-in Capacitor (7) Resonant Resistance Series Single crystal Capacitor C4 LiNbO

3 With built-in capacitors

G G type(Ultra compact) Specification Deviation M± 0 . 5 % Specification Capacitance 0 20±8 pF 1 10±4 pF Specification Resonant resistance 27 5 W max. 5 100 W max. FAR C4 C G R

FAR Family (C4 series G type) (8) User-specific Special Symbols (9) T aping Specification n MARKING Specification Description Name No specification, no taping specification — No specification, with taping specification A to Z Serial number for custom design Specification Description R 12 mm width tape & reel *EIAJ RC1001 standard Year 1993 1994 1995 1996 Jan A N a n Feb B P b Mar C Q Apr D R d r May E S e Jun F T f t Jul G U u Aug H V v Sep J W j Oct K X Nov L Y Dec M Z Note: The code on and after Jan 1997 is specified repeatedly from “A”. F 12 A n Fujitsu logo Frequency (MHz) & Deviation Lot No. (Date confirms to EIAJ. * ) 10 pF 20 pF Marking color Yellow White The stamp color varies according to built-in capacitor.

FAR Family (C4 series G type) n PIN ASSIGNMENT n DIMENSIONS (1) (2) (3) (1) (3) (2) .059(1.5) .018(0.47) .220(5.6) Unit: inches (mm) .102(2.6) .006(0.15) .006(0.15) .040 (1.0) .063 (1.6) .035 (0.9) .035 (0.9) .040 (1.0)

FAR Family (C4 series G type) n TAPE & REEL DIMENSIONS .055±.059 (14.0±1.5) .157±.004(4.0±0.1) .079±.004(2.0±0.1) .075(1.9) f.512±.008 (f13.0±0.2) .079±.020 (2.0±0.5) f.827±.031 (f21±0.8) R .039(1.0) .079±.020 (2.0±0.5) f12.992±.078 (f330±2.0) f3.150 (f80) f.059± .004 Unit: inches (mm) .012(0.3) .472–.012.217±.004 (5.5±0.1) (f1.0± ) 0.1 Reel quantity QTY/reel 3,000 pcs (f1.5± ) .315±.004 (8.0±0.1) 3.1±0.1 6.2±0.1 .059 –.004 (1.5–0.1) (12.0±0.3) 0.1 f.040± .004 .089±.004 (2.25±0.1) .089±.004 (2.25±0.1)

FAR Family (C4 series G type) n RESONATOR BUSINESS FLOW CHART RECEIVE INQUIRY Oscillation frequency should be varied according to applied micro controller or another IC’s. Fujitsu should recommend the resonator parts considering matching condition with applied IC. Following shows business flow chart. CUSTOMER FJ TO CHECK APPLIED CPU AND AVAILABILITY OF MA TCHING DATA TO BORROW APPLIED CPU TO T AKE MA TCHING DA T A (3 WEEKS) TO SUBMIT DATA REDESIGN (6 WEEKS) TO SUBMIT SAMPLE TO SUBMIT SPEC TO CHECK THE NECESSITY OF FREQUENCY ADJUSTMENT EVALUA TION SIGN AND SEND BACK NO MA TCHING DA T A MA TCHING DA T A AVAILABLE NOT OK OK NECESSARY NOT NECESSARY

FAR Family (C4 series G type) FUJITSU LIMITED For further information please contact: Japan FUJITSU MEDIA DEVICES LIMITED Marketing and T echnical Support Dept. SHINYOKOHAMA SQUARE BLDG 2-3-12,Shin-yokohama, Kouhoku-ku, Y okohama-shi, Kanagawa 222-0033, Japan T el: +81-45-471-0067 Fax: +81-45-471-0069 http://www.fujitsu.co.jp/hypertext/fmd/English/index.html North and South America FUJITSU MICROELECTRONICS, INC.

3545 North First Street,

San Jose, CA 95134-1804, U.S.A. T el: +1-408-922-9000 Fax: +1-408-922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) T el: +1-800-866-8608 Fax: +1-408-922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany T el: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New T ech Park, Singapore 556741 T el: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/ F9703 ª FUJITSU LIMITED Printed in Japan All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The contents of this document may not be reproduced or copied without the permission of FUJITSU LIMITED. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipments, industrial, communications, and measurement equipments, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.