FAP-600 COHERENT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

High-Brightness Fiber-Coupled Bars Fiber Array Packages (FAP) from Coherent are the highest quality fiber-coupled diode lasers in the industry, offering you the simplest way of delivering the output from a diode laser bar to your application. The FAP 600 series consists of a 19-element conduction-cooled diode laser bar, lensed and coupled to an 600 µm, multimode fiber bundle array.

FEATURES

  • High reliability
  • High efficiency
  • High brightness
  • Rugged construction

APPLICATIONS

  • Solid-State Laser Punping
  • Plastic Welding
  • Soldering
  • Heating FAP 600 Series

SPECIFICATIONS 1 FAP600-25W- FAP600-50W-800.0to Part Number 1041806 1276388 OPTICAL SPECIFICATIONS CW Output Power (W) 25 50 Center Wavelength 2 (nm) 808 810 Center Wavelength Tolerance (nm) ±3.0 ±10.0 Spectral Width 2 (nm) <3.5 <8.0 Wavelength Temperature Coefficient (nm/°C) 0.28 0.28 Beam Divergence 3 (NA) <0.16 <0.16 Beam Diameter (μm) 600 600 ELECTRICAL CHARACTERISTICS ( typical) Slope Efficiency (W/A) >0.9 >1.0 Conversion Efficiency (%) >40 >52 Threshold Current (A) 6 to 9 8 Operating Current (A) <36 <55 Operating Voltage (V) <2.0 <2.0 Recommended Hookup Wire (gauge) 8 or heavier 8 or heavier THERMAL SPECIFICATIONS Thermal Resistance (typical) (°C/W) 0.7 0.7 Case Operating Temperature (°C) -20 to 30 -20 to 30 Case Storage Temperature (°C) -20 to 60 -20 to 60 RECOMMENDED HEAT SINK Capacity (W) 100 100 Thermal Resistance (°C/W) <0.1 <0.1 MECHANICAL SPECIFICATIONS Weight 300 g (10.3 oz.) 300 g (10.3 oz.) Fiber Connector SMA 905 SMA 905 1 All values measured at case temperature (TC) = 25°C. 2 Custom center wavelengths and custom spectral widths are available, some from stock. Consult your Coherent representative. 3 The numerical aperture of the output beam is defined as the sine of the half-angle of the divergence cone that encircles 90% of the energy.

31.8 mm (1.25 in.) 16.4 mm (0.64 in.) 25.8 mm (1.02 in.) 8.6 mm (0.34 in.) 9.5 mm (0.375 in.) 64.0 mm (2.52 in.) 22.2 mm (0.88 in.) 14.8 mm (0.58 in.) 4.3 mm (0.17 in.) 2.2 mm (0.09 in.) 2X R Detail A (scale 3.0) 3.3 mm (0.13 in.) 21.1 ±1.0 mm (0.83 ±0.04 in.) 1.6 ±0.025 mm (0.06 ±0.001 in.) 3.1 mm (0.12 in.) See Detail A AR Coated 13.4 mm (0.53 in.) 15.8 mm (0.62 in.) 12.7 mm (0.50 in.) 11.7 mm (0.46 in.) 4X Ø4.0 mm Thru (0.16 in.) 2X Ø3.8 mm Thru (0.15 in.) Ø2.0 mm (0.08 in.) Ø3.3 mm (0.13 in.) Thru First Wall SMA 905 Male Connector Ø600 µm Fiber Bundle 8.8 mm (0.35 in.) 17.3 mm (0.68 in.) 15.9 mm (0.63 in.) Nose Length 9.77 to 9.80 mm (0.3847 to 0.3860 in.) 19.1 mm (0.75 in.) 6.4 mm (0.25 in.) 3.0 mm (0.12 in.) 70.0 mm (2.75 in.) 64.0 mm (2.52 in.) 57.1 mm (2.25 in.) Side View Bottom View Top View Front View

Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all Fiber Array Packages. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. Coherent, Inc.,

5100 Patrick Henry Drive Santa Clara, CA 95054

p. (800) 527-3786 | (408) 764-4983 f. (408) 764-4646 tech.sales@Coherent.com www.Coherent.com FAP 600 Series Datasheet MECHANICAL SPECIFICATIONS 6.4 mm (0.25 in.) 3.0 mm (0.12 in.) 31.8 mm (1.25 in.) 16.4 mm (0.64 in.) 19.1 mm (0.75 in.) 13.4 mm (0.53 in.) 15.8 mm (0.62 in.) 12.7 mm (0.50 in.) 57.1 mm (2.25 in.) 64.0 mm (2.52 in.) 70.0 mm (2.75 in.) 15.9 mm (0.63 in.) 11.7 mm (0.46 in.) 8.8 mm (0.35 in.) 22.2 mm (0.88 in.) 38.1 mm (1.5 in.) 14.8 mm (0.58 in.) 8.6 mm (0.34 in.) 25.8 mm (1.02 in.)17.3 mm (0.68 in.) 4.3 mm (0.17 in.) 2.2 mm (0.09 in.) 2X R Detail A (scale 3.0) 3.3 mm (0.13 in.) Ø3.3 mm (0.13 in.) 3.1 mm (0.12 in.) 9.53 mm (0.375 in.) 646.0 mm (2.52 in.) See Detail A Scale 0.75 Ø2.0 mm (0.08 in.) 1.6 ±0.025 mm (0.06 ±0.001 in.) 4X Ø4.0 mm Thru (0.16 in.) 2X Ø3.8 mm Thru (0.15 in.) SMA 905 Male Connector Top View Side View Front View Bottom View