FAN7361_07 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

„ Floating Channel Designed for Bootstrap Operation to +600V „ Typically 250mA/500mA Sourcing/Sinking Current Driving Capability „ Common-Mode dv/dt Noise Canceling Circuit „ VCC & VBS Supply Range from 10V to 20V „ UVLO Function for VBS „ Output In-phase with Input Signal „ 8-SOP

Applications

„ PDP Scan Driver „ Motor Control „ SMPS „ Electronic Ballast

Description

The FAN7361/FAN7362, a monolithic high-side gate drive IC, can drive MOSFETs and IGBTs that operate up to +600V. Fairchild’s high-voltage process and common- mode noise canceling techniques provide stable opera- tion of the high-side driver under high dv/dt noise circum- stances. An advanced level sh ift circuit offers high-side gate driver operation up to V S=-9.8V(typ.) for VBS=15V. The UVLO circuit prevents malfunction when V BS is lower than the specified threshold voltage. Output drivers typically source/sink 250mA/5 00mA, respectively, which is suitable for fluorescent lamp ballast, PDP scan driver, motor control, and so on.

Ordering Information

Note: 1. These devices passed wave soldering test by JESD22A-111. 8-SOP Part Number Package Pb-Free Operating Temperature Range Packing Method FAN7361M(1) 8-SOP Yes -40°C ~ 125°C TUBE FAN7361MX(1) TAPE & REEL FAN7362M(1) TUBE FAN7362MX(1) TAPE & REEL

Figure 3. Pin Configuration (Top View)

2 IN Logic Input for High-Side Gate Driver Output

4 GND Logic Ground

7 HO High-Side Driver Output

FAN7361, FAN7362 High-Side Gate Driver © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FAN7361, FAN7362 Rev. 1.0.7 4 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera- ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi- tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA=25°C, unless otherwise specified. Notes: 3. Refer to the following standards: JESD51-2: Integral circuits thermal test method environmental conditions - Natural convection JESD51-3: Low effective thermal conductivity test board for leaded surface mount packages 4. Do not exceed PD under any circumstances. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual dev ice operation. Recommended operating conditions are specified to ensure optimal perfor mance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Characteristics Min. Max. Unit VS High-Side Offset Voltage V B-25 V B+0.3 V VB High-Side Floating Supply Voltage -0.3 625 VHO High-Side Floating Output Voltage V S-0.3 V B+0.3 VCC Logic Fixed Supply Voltage -0.3 25 VIN Logic Input Voltage -0.3 V CC+0.3 dVS/dt Allowable Offset Voltage Slew Rate ± 50 V/ns PD (2)(3)(4) Power Dissipation 0.625 W θJA Thermal Resistance, Junction-to-Ambient 200 °C/W TJ Junction Temperature 150 °C TS Storage Temperature 150 °C Symbol Parameter Min. Max. Unit VB High-Side Floating Supply Voltage V S+10 V S+20 V VS High-Side Floating Supply Offset Voltage 6-V CC 600 VHO High-Side Output Voltage V S VB VIN Logic Input Voltage GND V CC VCC Logic Supply Voltage 10 20 TA Ambient Temperature -40 125 °C

FAN7361, FAN7362 High-Side Gate Driver © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FAN7361, FAN7362 Rev. 1.0.7 5

Electrical Characteristics

VBIAS(VCC, VBS)=15.0V, TA = 25°C, unless other wise specified. The V IN and IIN parameters are re ferenced to GND. The VO and IO parameters are referenced to VS and are applicable to the respective output HO. Dynamic Electrical Characteristics VBIAS(VCC, VBS)=15.0V, VS=GND, CL=1000pF and TA = 25°C, unless otherwise specified. Note: 5. This parameter guaranteed by design. Symbol Characteristics Test Condition Min. Typ. Max. Unit VBSUV+ VBS Supply Under-Voltage Positive Going Threshold VIN=0V FAN7361 8.2 9.2 10.2 V FAN7362 7.6 8.6 9.6 VBSUV- VBS Supply Under-Voltage Negative Going Threshold VIN=0V FAN7361 7.4 8.6 9.2 FAN7362 7.2 8.2 9.2 VBSHYS VBS Supply Under-Current Lockout Hysteresis VIN=0V FAN7361 0.5 FAN7362 0.4 I LK Offset Supply Leakage Current V B=VS=600V 10 µA IQBS Quiescent VBS Supply Current V IN=0V or 5V 50 80 IQCC Quiescent VCC Supply Current V IN=0V 30 75 IPBS Operating VBS Supply Current C L=1nF, f=10kHz 420 550 VIH Logic "1" Input Voltage FAN7361 3.6 V FAN7362 2.9 VIL Logic "0" Input Voltage FAN7361 1.0 FAN7362 0.8 V OH High Level Output Voltage, VB-VHO No load 0.1 VOL Low Level Output Voltage, VHO No load 0.1 IIN+ Logic "1" Input Bias Current V IN=5V 50 90 µA IIN- Logic "0" Input Bias Current V IN=0V 1.0 2.0 IO+ Output High Short Circuit Pulse Current V HO=0V, VIN=5V, PW ≤ 10µs 200 250 mA IO- Output Low Short Circuit Pulse Current V HO=15V, VIN=0V,PW ≤ 10µs 400 500 VS Allowable Negative VS Pin Voltage for IN Signal Propagation to HO -9.8 -7.0 V Symbol Characteristics Test Condition Min. Typ. Max. Unit ton Turn-on Propagation Delay V S=0V 120 200 ns toff Turn-off Propagation Delay V S=0V or 600V(5) 90 180 tr Turn-on Rise Time 70 160 tf Turn-off Fall Time 30 100

Figure 10. Switching Time Test Circuit Figure 11. Input / Output Timing Diagram

Dimensions are in millimeters (inches) unless otherwise noted. Figure 12. 8-Lead Small Outline Package (SOP)

0.202 MAX

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Across the board. Around the world.¥ ActiveArray¥ Bottomless¥ Build it Now¥ CoolFET¥ CROSSVOLT¥ CTL™ Current Transfer Logic™ DOME¥ E CMOS¥ EcoSPARK EnSigna¥ FACT Quiet Series™ FACT FAST FASTr¥ FPS¥ FRFET GlobalOptoisolator¥ GTO¥ HiSeC¥ i-Lo¥ ImpliedDisconnect¥ IntelliMAX¥ ISOPLANAR¥ MICROCOUPLER¥ MicroPak¥ MICROWIRE¥ MSX¥ MSXPro¥ OCX¥ OCXPro¥ OPTOLOGIC OPTOPLANAR PACMAN¥ POP¥ Power220 Power247 PowerEdge¥ PowerSaver¥ PowerTrench Programmable Active Droop¥ QFET QS¥ QT Optoelectronics¥ Quiet Series¥ RapidConfigure¥ RapidConnect¥ ScalarPump¥ SMART START¥ SPM SuperFET¥ SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 TCM¥ The Power Franchise TinyBoost¥ TinyBuck¥ TinyLogic TINYOPTO¥ TinyPower¥ TinyWire¥ TruTranslation¥ PSerDes¥ UHC UniFET¥ VCX¥ Wire¥ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I23 FAN7361, FAN7362 High-Side Gate Driver © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FAN7361, FAN7362 Rev. 1.0.7 9