DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Features
- Qualified to AEC Q100
- Floating channel designed for bootstrap operation fully oper - ational up to 300V.
- Tolerance to negative transient voltage on VS pin
- dv/dt immune.
- Gate drive supply range from 4.5V to 20V
- Under-voltage lockout
- CMOS Schmitt-triggered inputs with pull-down and pull-up
- High side output out of phase with input (Inverted input)
- Reset input
- Internal recharge FET for bootstrap refresh Typical Applications
- Diesel and gasoline injectors/valves
- MOSFET-and IGBT high side driver applications
Description
The FAN7085-GF085 is a high-side gate drive IC with reset input and built-in recharge FET. It is designed for high voltage and high speed driving of MOSFET or IGBT, which operates up to 300V. ON Semiconductor's high-voltage process and common-mode noise cancellation technique provide stable operation in the high side driver under high-dV/dt noise circumstances. Logic input is compatible with standard CMOS outputs. The UVLO cir-cuits prevent from malfunction when VCC and VBS are lower than the specified threshold voltage. It is available with space saving SOIC-8 Package. Minimum source and sink current capability of output driver is 250mA and 250mA. Built-in recharge FET to refresh bootstrap circuit is very useful for circuit topology requiring switches on low and high side of load. SOIC-8
Ordering Information
Temp. FAN7085M-GF085 SO IC-8 -40 C ~ 125 C FAN7085MX-GF085 SO IC-8 -40 C ~ 125 C X : Tape & Reel type
www.onsemi.com FAN7085-GF085 High Side Gate Driver with Recharge FET Block Diagrams VCC Under Voltage Reset VCC to GND Logic Pulse Filter Level Shifter ON Level Shifter OFF Delay Under Voltage Reset VB to VS Pulse Filter Flip Flop Brake before make RESET- IN- GND VS HO VB Recharge Path Pin Assignments 4 5 VCC IN GND RESET VS NC HO VB Pin Definitions Pin Number Pin Name I/O Pin Function Description
1 VCC P Driver supply voltage, typically 5V
2 IN- I Driver control signal input (Negative Logic)
3 GND P Ground
4 RESET- I Driver enable input signal (Negative Logic)
5 VS P High side floating offset for MOSFET Sour ce connection
6 NC - No connection (No Bond wire)
7 HO A High side drive output for MOSFET Gate connection
8 VB P Driver output stage supply
www.onsemi.com FAN7085-GF085 High Side Gate Driver with Recharge FET Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are abso- lute voltages referenced to GND. Parameter Symbol Min. Max. Unit High side floating supply voltage VBS -0.3 25 V High side driver output stage voltage Neg. transient: 0.5 ms, external MOSFET off VB -5 325 V High side floating supply offset voltage Neg. transient 0.2 us Vs -25 300 V High side floating output voltage VHO VS-0.3 VB+0.3 V Supply voltage VCC -0.3 25 V Input voltage for IN- VIN -0.3 Vcc+0.3 V Input voltage for RESET- VRES -0.3 Vcc+0.3 V Power Dissipation 1) Pd 0.625 W Thermal resistance, junction to ambient 1) Rthja 200 C/W Electrostatic discharge voltage (Human Body Model) VESD 1.5K V Charge device model VCDM 500 V Junction Temperature Tj 150 C Storage Temperature TS -55 150 C Note: 1) The thermal resistance and power dissipation rating are measured bellow conditions; JESD51-2: Integrated Circuit Thermal Test Method Environmen tal Conditions - Natural condition(StillAir) JESD51-3: Low Effective Thermal Conductivity Test Board for Leaded Surface Mount Package Recommended Operating Conditions For proper operation the device should be used within the recommended conditions Parameter Symbol Min. Max. Unit High side floating supply voltage(DC) Transient:-10V@ 0.2 us VB VS+4.5 VS+20 V High side floating supply offset voltage(DC) @VBS=7V VS -3 300 V High side floating supply offset voltage(Transient) 0.2us @VBS<25V VS -25 300 V High side floating output voltage VHO Vs VB V Allowable offset voltage Slew Rate 1) dv/dt - 50 V/ns Supply voltage for logic part VCC 4.5 20 V Input voltage for IN- VIN 0 Vcc V Input voltage for RESET- VRESET 0 Vcc V Switching frequency 2) Fs 200K Hz Minimum low input width 3) tIN(low,min) 560 - ns Minimum high input width 3) tIN(high,min) 60 - ns Minimum operating voltage of VB related to GND VB(MIN)4) 4 - V Ambient temperature Ta -40 125 C Note: 1) Guaranteed by design. 2) Duty = 0.5, VBS >=7V 3) Guaranteed by design. Pulse widths below the specified values, may be ignored. Output will either follow the input signal or will ignore it. No false output state is guaranteed when minimum input width is smaller than tin 4) Guaranteed by design
www.onsemi.com FAN7085-GF085 High Side Gate Driver with Recharge FET Statics Electrical Characteristics Unless otherwise specified, -40°C <= Ta <= 125°C, VCC = 5V, VBS = 7V, VS = 0V, VRESET = 5V, RL = 50, CL = 2.5nF. Parameter Symbol Conditions Min. Typ. Max. Unit VCC and VBS Supply Characteristics VCC and VBS supply under voltage positive going threshold VCCUV+ VBSUV+ Vcc and VBS rising from 0V - 3.7 4.3 V VCC and VBS supply under voltage negative going threshold VCCUV- VBSUV- Vcc and VBS dropping from 5V 2.8 3.4 - V VCC and VBS under voltage hysteresis VCCUVH VBSUVH - 0.02 0.3 - V Under voltage lockout response time tduvcc tduvbs VCC: 6.5V->2.4V or 2.4V->6.5V VBS: 6.5V->2.4V or 2.4V->6.5V 0.5 0.5 us us Offset supply leakage current I LK VB=VS=300V - - 200 uA Quiescent Vcc supply current IQCC Vcc=20V - - 500 uA Quiescent VBS supply current IQBS1 Static mode, VBS=7V, VIN=0 or 5V 100 uA Quiescent VBS supply current IQBS2 Static mode, VBS=16V, VIN=0 or 5V 200 uA VBS drop due to output turn-on (Design guaranty) BS VBS=7V, Cbs=1uF, tdIG-IN =3uS, tTEST=100uS 210 mV Input Characteristics High logic level input voltage for IN- VIH 0.6VCC - - V Low logic level input voltage for IN- VIL - - 0.28VCC V Low logic level input bias current for IN- IIN- VIN=0 5 25 60 uA High logic level input bias current for IN- IIN+ VIN=5V - - 5 uA Full up resistance at IN RIN 83 200 1000 High logic level input voltage for RESET- VRH 0.6Vcc - - V Low logic level input voltage for RESET- VRL 0.28Vcc V High logic level input current for RESET- IRES+ VRESET=5V 5 25 60 uA Low logic level input bias current for RESET- IRES- VRESET=0 5 uA Full down resistance at RESET- RRES 83 200 1000 Output characteristics High level output voltage, VB - VHO VOH IO=0 - - 0.1 V Low level output voltage, VHO-GND VOL IO=0 - - 0.1 V Peak output source current IO+ VIN=5V 250 450 - mA Peak output sink current IO- VIN=0 250 450 - mA Equivalent output resistance ROP 15.5 28 RON 15.5 28 Recharge Characteristics Recharge TR turn-on propagation delay Ton_rech 4 7.9 9.8 us Recharge TR turn-off propagation delay Toff_rech 0.2 0.4 us Recharge TR on-state voltage drop VRECH Is=1mA, VIN=5V @125C 1.2 V Dead Time Characteristics High side turn-off to recharge gate turn-on DTHOFF Vcc=5V, VS=7V 4 7.8 9.8 us Recharge gate turn-off to high side turn-on DTHON Vcc=5V, VS=7V 0.1 0.4 0.7 us Note: The input parameter are referenced to GND. The VO and IO parameters are referenced to GND.
www.onsemi.com FAN7085-GF085 High Side Gate Driver with Recharge FET Dynamic Electrical Characteristics Unless otherwise specified, -40°C <= Ta <= 125°C, VCC = 5V, VBS = 7V, VS = 0V, VRESET = 5V, RL = 50, CL = 2.5nF. Parameter Symbol Conditions Min. Typ. Max. Unit Input-to-output turn-on propagation delay tplh 50% input level to 10% output level, VS = 0V 0.56 1 us Input-to-output turn-off propagation delay tphl 50% input level to 90% output level VS = 0V - 0.15 0.5 us RESET-to-output turn-off propagation delay tphl_res 50% input level to 90% output level - 0.17 0.5 us RESET-to-output turn-on propagation delay tplh_res 50% input level to 10% output level - 0.56 1 us Output rising time tr1 Tj=25C - 65 200 ns tr2 - 400 ns tr3 Tj=25C,VBS=16V 65 200 ns tr4 VBS=16V - 400 ns Output falling time tf1 Tj=25C - 25 200 ns tf2 - 300 ns tf3 Tj=25C,VBS=16V 25 200 ns tf4 VBS=16V - 300 ns
www.onsemi.com FAN7085-GF085 High Side Gate Driver with Recharge FET
Application Information
- Logic Tables VCC VBS RESET - IN- Ho RechFET < VCCUVLO- X X X OFF ON X X LOW X OFF ON X X X HIGH OFF ON > VCCU VLO+ > VBS UVLO+ HIGH LOW ON OFF > VCCU VLO+ < VBSUVLO- HIGH LOW OFF OFF Notes: X means independent from signal IN-=LOW indicates that the high side NMOS is ON IN-=HIGH indicates that the high side NMOS is OFF RechFET =ON indicates that the rec harge MOSFET is ON RechFET =OFF indicates that the recharge MOSFET is OFF
www.onsemi.com FAN7085-GF085 High Side Gate Driver with Recharge FET Typical Application Circuit VCC IN- GND RESET- VB HO NC VS R2C2 VCC D1 Up to 300V Load 1. Typical Application Circuit VCC IN- GND RESET- VB HO NC VS C2 C1 From Charge Pump Voltage Source Load GND From LS Driver 2. Application Example
www.onsemi.com FAN7085-GF085 High Side Gate Driver with Recharge FET Input-Output Waveforms Toff_rech Ton_rech tphl IN- RESET- VS VHO Recharge tplh 10% 90%90% 10% tr tf Figure.1 Input and Output Timing Diagram and Switching Time Waveform Definition 1. Input/Output Timing Diagrams 2. Reset T iming Diagrams tphl_res tplh_res IN- RESET- VHO Figure.2 Reset and Output Timing Diagram
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative © Semiconductor Components Industries, LLC ❖