YPY1114C-0005 STANLEY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Features

・Outer Dimension 1.6 x 0.8 x 0.4mm ( L x W x H ) ・Temperature range Storage Temperature Operating Temperature ・Lead–free soldering compatible ・RoHS compliant Package Product features Spatial distribution Die materials θx = 130 deg., θy =150 deg. : -40℃～100℃ : -40℃～ 85℃ 1608 (h=0.4mm) Type, Milky White resin AlGaInP 1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Dominant wavelength Yellow Green : 572nm(YPY) Yellow : 590nm(FY) Orange : 605nm(FA) Red : 626nm(FR) Rank grouping parameter Assembly method Soldering methods Taping and reel ESD Sorted by luminous intensity and wavelength per rank taping Auto pick & place machine (Auto Mounter) 4,000pcs per reel in a 8mm width tape. (Standard) Reel diameter: φ180mm 1kV (HBM) Reflow soldering and manual soldering 2007.8.31

Color and Luminous Intensity Page 2 2006.11.29 Single Color 1608 (h=0.4 mm) Type ※Note : The above luminous intensity(Iv) is the setup values of the sorting machine. (Tolerance : IV… ±10%) (Ta=25℃) 1114C-0005 Series TYP. I F MIN. TYP. I F YPY1114C-0005 AlGaInP Yellow Green 5 7 254 . 01 0 5 FY1114C-0005 AlGaInP Yellow 590 5 6.3 16 5 FA1114C-0005 AlGaInP Orange 605 5 6.3 16 5 FR1114C-0005 AlGaInP Red 626 5 6.3 16 5 Milky White Part No. Material Emitted Color Iv (mcd) Lens Color Luminous IntensityDominant Wavelength λd (nm)

2006.11.29 Single Color 1608 (h=0.4 mm) Type (Ta=25℃) 1114C-0005 Series YPY FY FA FR Power Dissipation P d 36 36 36 36 mW Forward Current I F 15 15 15 15 mA Pulse Forward Current ※1 IFRM 48 48 48 48 mA ⊿IF 0.21 0.21 0.21 0.21 mA/ ℃ ⊿IFRM 0.69 0.69 0.69 0.69 mA/ ℃ Reverse Voltage V R 5555 V Operating Temperature Topr ℃ Storage Temperature T stg ℃ Item Symbol Unit Derating (Ta=25℃ or higher) Absolute Maximum Ratings -40～+85 -40～+100 ※1 IFRMMeasurement condition : Pulse Width≦1ms., Duty≦1/20.

Electro-Optical Characteristics Page 4 2006.11.29 Single Color 1608 (h=0.4 mm) Type (Ta=25℃) 1114C-0005 Series Conditions YPY FY FA FR Reverse Current V R=5V I R MAX. 100 100 100 100 μA Peak Wavelength I F=5mA λp TYP. 575 592 609 635 nm Dominant Wavelength IF=5mA λd TYP. 572 590 605 626 nm Spectral Line Half Width IF=5mA ⊿λ TYP. 15 15 15 15 nm 130(θx) 130( θx) 130( θx) 130( θx) 150(θy) 150( θy) 150( θy) 150( θy) Item Symbol Unit Forward Voltage I F=5mA V F V Characteristics deg.Half Intensity Angle I F=5mA 2 θ1/2 TYP.

2006.11.29 Single Color 1608 (h=0.4 mm) Type 1114C-0005 Series ˞ Please contact our sales staff concerning rank designation. Intensity Tolerance each Rank : +/- 10% (Ta=25℃) ˞ Please contact our sales staff concerning rank designation. IF = 5mA YPY IV（mcd） ConditionRank FY FA FR

2006.11.29 Single Color 1608 (h=0.4 mm) Type (Ta=25℃) 1114C-0005 Series Color Tone Groups (λd) ˞ Please contact our sales staff concerning rank designation. B 584.0 587.5 599.1 603.9 C 586.5 590.0 602.1 606.9 D 589.0 592.5 605.1 609.9 E 591.5 595.0 608.1 612.9 F 594.0 597.5 Rank FY FA FR IF = 5mA YPY Dominant Wavelength λd (nm) Condition

Technical Data(YPY/FY/FA/FR) Page 7 2006.11.29 Spatial Distribution Example Condition : Ta = 25℃ Spectral Distribution Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 5mA Wavelength [nm] Relative Intensity Forward Voltage vs. Forward Current Condition : Ta = 25℃ Forward Voltage VF(V) Forward Current IF(mA) Forward Current vs. Relative Intensity Condition : Ta = 25℃ Forward Current IF(mA) Relative Intensity Single Color 1608 (h=0.4 mm) Type 1114C-0005 Series

2006.11.29 Ambient Temperature vs. Relative Intensity Ambient Temperature : Ta(℃) Derating Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 50Hz Ambient Temperature : Ta(℃) Maximum Forward Current : IF MAX. (mA) Relative Intensity Power Dissipation vs. Ambient Temperature Ambient Temperature : Ta(℃) Power Dissipation : Pd (mW) Pulse Width vs. Maximum Tolerable Peak Current Condition : Ta = 25℃ Pulse Width : tw (μs) IF peak Max./IF DC MAX. Single Color 1608 (h=0.4 mm) Type 1114C-0005 Series Technical Data(YPY/FY/FA/FR)

Ambient Temperature vs. Forward Voltage Ambient Temperature : Ta(℃) Duty Cycle vs. Maximum Forward Current Duty(%) Page 9 2006.11.29 Maximum Forward Current : IF MAX. (mA) Forward Voltage VF(V) Single Color 1608 (h=0.4 mm) Type 1114C-0005 Series Technical Data(YPY/FY/FA/FR)

Recommended Soldering Pattern (Unit: mm) Taping Specification (Unit: mm) (Unit: mm) Quantity : 4,000pcs/ reel (standard) Single Color 1608 (h=0.4 mm) Type Page 10 Weight: (1.32)mg 1114C-0005 Series 2007.10.12

Reflow Soldering Conditions Manual Soldering Conditions Iron tip temp. Soldering time and frequency 3 s 1 time 350 (MAX.) (MAX.) (MAX.) Single Color 1608 (h=0.4 mm) Type 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6 maximum) Page 11 1114C-0005 Series 2007.8.31

2006.11.29 These types are designed chiefly for Cellular phone application, and are setting the thickness of the Product to about 0.4-0.5 mm thinly.To achieve the tin type of the product, making each material thin is aimed at. Because they are inferior to our general LEDs by an external stress, please use these product types after paying attention to the following. 1)Please set the mounting load to Max. 2N. 2)Please do not increase more quantity of the soldering paste than necessary quantity (The thickness of stencil Mask : about 100-120μ), because the terminal area of the product is small. 3)Please avoid the collision of the mounting board etc. after LEDs were mounted on the substrate. 4)When warp of substrate is large after these were mounted on FPC etc, please use these product types after affirming these is no problem. 5)Please use these product types after affirming there is no problem about the mounting position etc. of product from substrate edge, when mounting them on multi-layer and multi-piece PCBs. Page 12 Single Color 1608 (h=0.4 mm) Type 1114C-0005 Series

Reliability Testing Result Failure Criteria Reliability Testing Result Applicable Standard Testing Conditions Duration Failure Room Temp. Operating Life EIAJ ED- 4701/100(101) Ta = 25℃, IF = Maxium Rated Current 1,000 h 0/25 Resistance to Soldering Heat EIAJ ED- 4701/300(301) Pre-heating : 150～180℃ 120s Max. Operation Heating : 230℃ 40s Max. Peak Temperature : 260℃ Twice 0/25 Temperature Cycling EIAJ ED- 4701/100(105) Minimum Rated Storage Temperature(30min) ～Normal Temperature(15min) ～Maximum Rated Storage Temperature(30min) ～Normal Temperature(15min) 5 cycles 0/25 Wet High Temp. Storage Life EIAJ ED- 4701/100(103) Ta = 60±2℃, RH = 90±5% 1,000 h 0/25 High Temp. Storage Life EIAJ ED- 4701/200(201) Ta = Maximum Rated Storage Temperature 1,000 h 0/25 Low Temp. Storage Life EIAJ ED- 4701/200(202) Ta = Minimum Rated Storage Temperature 1,000 h 0/25 Vibration, Variable Frequency EIAJ ED- 4701/400(403) 98.1m/s (10G), 100 ～ 2KHz sweep for 20min., XYZ each direction 2 h 0/10 Items Symbols Conditions Failure criteria Luminous Intensity Iv IF Value of each product Luminous Intensity Testing Min. Value ＜ Spec. Min. Value x 0.5 Forward Voltage V F IF Value of each product Forward Voltage Testing Max. Value ≧ Spec. Max. Value x 1.2 Reverse Current I R VR = Maximum Rated Reverse Voltage V Testing Max. Value ≧ Spec. Max. Value x 2.5 Cosmetic Appearance - - Occurrence of notable decoloration, deformation and cracking Single Color 1608 (h=0.4 mm) Type 1114C-0005 Series 2007.8.31

Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet Single Color 1608 (h=0.4 mm) Type Page 14 1114C-0005 Series 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31