F6501 IDT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

 12.5GHz to 15GHz operation  8 radiation channels  6-bit phase control  6-bit gain control  50ns typical gain settling time  20ns typical phase settling time  3° typical RMS phase error  0.4dB typical RMS gain error  35dB gain attenuation range  5-bit IC address  Integrated proportional-to-absolute temperature (PTAT) sensor with external biasing  -40°C to +95°C Internal temperature sensor  Programmable 4-state on-chip memory  Supply voltage: +2.1V to +2.5V  -40°C to +95°C ambient operating temperature range  27°C typical ambient operating temperature  3.8mm x 4.6mm, 62-BGA package Block Diagram Figure 1. Block Diagram

F6501 Preliminary Short-Form Datasheet © 2018 Integrated Device Technology, Inc. 2 September 21, 2018

Ordering Information

Orderable Part Number Package MSL Rating Carrier Type Temperature F6501AVGK 3.8mm x 4.6mm 62-BGA MSL 3 Loose Parts -40° to +95°C F6501AVGK8 3.8mm x 4.6mm 62-BGA MSL 3 Reel -40° to +95°C F6501EVB Evaluation Board F6501EVS F6501 Evaluation Kit System, including Evaluation Board, 2x THRU Reference Fixture, FT2232H Mini-Module Microcontroller, Digital Cable, Power Cable, and USB-to-Mini Cable Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138 www.IDT.com Sales 1-800-345-7015 or 408-284-8200 Fax: 408-284-2775 www.IDT.com/go/sales Tech Support www.IDT.com/go/support DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modi fy the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance specifica tions and operating parameters of the described products are determined in an independent state and are not guaranteed to per form the same way when installed in customer products. The information contained herein is provided without representation or warra nty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an implied warranty of merchantability, or non -infringement of the intellectual property rights of others. This docume nt is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreeme nt by IDT. Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary . All contents of this document are copyright of Integrated Device Technology, Inc. All rights reserved. Preliminary