DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

 25GHz to 31GHz operation  4 radiation channels  100ns typical RF switch Tx/Rx mode switching time  20ns typical gain and phase settling time  3° typical RMS phase error  0.4dB typical RMS gain error  Advanced SPI with 4 state memory  6-bit chip address  Integrated PTAT with external biasing  Internal temperature sensor  Up to 50MHz SPI control  Programmable on-chip memory  Supply voltage: +2.3V to +2.7V  -40°C to +105°C ambient operating temperature range  3.6 × 3.6 mm, 49-BGA package Block Diagram Figure 1. Block Diagram

F5280 Short-Form Datasheet © 2018 Integrated Device Technology, Inc. 2 November 6, 2018 IDT Confidential and Proprietary Information

Ordering Information

Orderable Part Number Description and Package MSL Rating Carrier Type Temperature F5280AVGK 3.6 × 3.6 × 0.9 mm BGA MSL 3 Tray -40° to +105°C F5280AVGK8 3.6 × 3.6 × 0.9 mm BGA MSL 3 Reel -40° to +105°C F5280EVB F5280 Evaluation Board F5280EVS F5280 Evaluation Kit System, including Evaluation Board, 2x THRU Reference Fixture, FT2232H Mini-Module Microcontroller, Digital Cable, Power Cable, and USB-to-Mini Cable.

Revision History

Revision Date Description of Change November 6, 2018 Initial release. Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138 www.IDT.com Sales 1-800-345-7015 or 408-284-8200 Fax: 408-284-2775 www.IDT.com/go/sales Tech Support www.IDT.com/go/support DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, w hether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an implied warranty of merchantability, or non- infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the Unit ed States and other countries. Other trademarks used herein are the property of IDT or their respective third party owners. For dat asheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary . All contents of this document are copyright of Integrated Device Technology, Inc. All rights reserved.