DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors LEAD-FREE COMPATIBLE COMPONENT MARKING M CASE S CASE *Capacitance Code A J s Rated Voltage Code Rated Voltage Code /H11623 Packaging /H11623/H11623/H11623/H11623/H11623 Special Code AXE = Rated temperature 60ºC and H dimension 1.0mm Max. AXEH3 = Rated temperature 60°C and H dimension 1.0mm Max., Low ESR LZT = Rated temperature 60ºC only AH1, AH2, AH3 = Low ESR

FEATURES

  • Conductive polymer electrode
  • Benign failure mode under recommended use conditions
  • Compliant to the RoHS2 directive 2011/65/EU
  • SMD facedown
  • Small and low profile
  • High volumetric efficiency

APPLICATIONS

  • Smartphone
  • Tablet PC
  • Wireless module
  • Portable game CASE DIMENSIONS:millimeters (inches) Code L W 1 W2 HS 1 S2 +0.20 -0.10 +0.008 -0.004 +0.20 -0.10 +0.008 -0.004 +0.20 -0.10 +0.008 -0.004 +0.20 -0.10 +0.008 -0.004 Reel Dia Tape Width (φ180) (mm) F38 Type Rated Voltage 225 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) M Tolerance M = ±20% M Case Size See table above HOW TO ORDER Category Temperature Range: -55 to +105°C Rated Temperature: +85°C (*2) Capacitance Tolerance: ±20% at 120Hz Dissipation Factor: Refer to next page (120Hz) ESR 100kHz: Refer to next page (120Hz) Leakage Current: Refer to next page At 20ºC after application of rated voltage for 5 minutes Provided that: After 5 minute’s application of rated voltage, leakage current at 105°C 10 times or less than 20ºC specified value. TECHNICAL SPECIFICATIONS *1 F380J476MMAAXE: 1.0mm Max. *2 F380J476MMAAXE: Rated temperature +60ºC Surge, endurance test temperature +60ºC

Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors Capacitance Rated Voltage *Cap μF Code 4V (0G) 6.3V (0J) 10V (1A) Code 2.2 225 M – 4.7 475 M – 10 106 M/M(AH1,AH2) M/M(AH1) a 22 226 M/M(AH3,AH1)/S/S(AH1) S j 33 336 M**/S n 47 476 M* 4/M*4(H3)/S/S(AH1) s 68 686 S** w 100 107 S* A CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Available Ratings, (Low ESR) *Codes under development – subject to change *4 Rated temperature 60℃ and H dimension 1.0mm Max only. Please contact AVX when you need detail spec. **Rated temperature 60ºC only. Please contact AVX when you need detail spec. Please contact to your local AVX sales office when these series are being designed in your application. RATINGS & PART NUMBER REFERENCE THE CORELATIONS AMONG RATED VOLTAGE, SURGE VOLTAGE AND DERATED VOLTAGE Item All Case (%) Damp Heat, steady state -20 to +30 Rapid change of temperature ±20 Resistance soldering heat ±20 Surge ±20 Endurance ±20 F38 (Standard) F38-AXE Rated Voltage (V) 6.3 10 6.3 60ºC Surge Voltage (V) - - 8 85ºC Surge Voltage (V) 8 13 - 85ºC Derated Voltage (V) - - 4.5 105ºC Derated Voltage (V) 5 8 3.3 *3: ΔC/C Marked “*” Rated Leakage DF ESR 100kHz RMS *3AVX Case Capacitance Voltage Current (%) (mΩ) Current ΔC/CPart No. Size (μF) (V) (μA) @ 120Hz @ 100kHz (mA) (%) 20ºC

6.3 Volt

F380J106MMA M 10 6.3 10.0 8 500 224 * F380J106MMAAH1 M 10 6.3 10.0 8 300 289 * F380J106MMAAH2 M 10 6.3 10.0 8 200 354 * F380J226MMA M 22 6.3 13.9 10 500 224 * F380J226MMAAH3 M 22 6.3 13.9 10 300 289 * F380J226MMAAH1 M 22 6.3 13.9 10 200 354 * F380J226MSA S 22 6.3 13.9 10 200 474 * F380J226MSAAH1 S 22 6.3 13.9 10 150 548 * F380J336MMALZT M 33 6.3 41.6 10 500 224 * F380J336MSA S 33 6.3 20.8 10 200 474 * F380J476MMAAXE*4 M 47 6.3 59.2 10 500 224 * F380J476MMAAXEH3 M 47 6.3 59.2 10 300 289 * F380J476MSA S 47 6.3 29.6 10 200 474 * F380J476MSAAH1 S 47 6.3 29.6 10 150 548 * F380J686MSALZT S 68 6.3 86.0 10 200 474 *

10 Volt

F381A225MMA M 2.2 10 10.0 6 500 224 * F381A475MMA M 4.7 10 10.0 6 500 224 * F381A106MMA M 10 10 10.0 15 500 224 * F381A106MMAAH1 M 10 10 10.0 15 300 289 * F381A226MSA S 22 10 22.0 10 200 474 *

Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors TEST F38 series (Temperature range -55ºC to +105ºC) Condition At 40°C, 90 to 95% R.H., 500 hours (No voltage applied) At -55°C / +105°C, 30 minutes each, 5 cycles 10 seconds reflow at 240°C After application of surge voltage in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC (*2), capacitors shall meet the characteristic requirements in the table above. After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C (*2), capacitors shall meet the characteristic requirements in the table above. Shear Test After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Terminal Strength Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. QUALIFICATION TABLE NOTICE: DESIGN, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. *2 F380J476MMAAXE: Rated temperature +60ºC Surge, endurance test temperature +60ºC