F2SP MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: F2SP F2SP SPECIFICATIONS ES-5434 Rev.6 Page 1/3 http://www.m-system.co.jp/ Super-mini Signal Conditioners F2 Series LOW FREQUENCY TRANSMITTER (50 Hz minimum) Functions & Features

  • Converting the output from a pulse-type transducer into a standard process signal Typical Applications
  • Positive displacement flowmeters, turbine flowmeters and vortex flowmeters
  • Proximity switches 22.5 (.89) (2.95) mm (inch) 107 (4.21) MODEL: F2SP–[1][2]–R[3]

ORDERING INFORMATION

  • Code number: F2SP-[1][2]-R[3] Specify a code from below for each of [1] through [3]. (e.g. F2SP-2A-R/Q)
  • Frequency range (e.g. 0 – 10 kHz)
  • Special output range (For codes Z & 0)
  • Specify the specification for option code /Q (e.g. /C01) [1] INPUT 1: Dry contact 2: Voltage pulse [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 750 Ω max.) B: 2 – 10 mA DC (Load resistance 1500 Ω max.) C: 1 – 5 mA DC (Load resistance 3000 Ω max.) D: 0 – 20 mA DC (Load resistance 750 Ω max.) E: 0 – 16 mA DC (Load resistance 900 Ω max.) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 1000 Ω min.) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating GENERAL SPECIFICATIONS Construction: Stand-alone; terminal access at the front Connection: Euro type connector terminal (applicable wire size: 0.2 to 2.5 mm2, stripped length 7 mm) Housing material: Flame-resistant resin (black) Isolation: Input to output to power Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) Input pulse sensing: DC coupled; detecting pulse rise Input filter: Provided with input range <100 Hz with dry contact input (time constant approx. 1 msec.) Low-end cutout: 2 to 5 %

MODEL: F2SP F2SP SPECIFICATIONS ES-5434 Rev.6 Page 2/3 http://www.m-system.co.jp/ INPUT SPECIFICATIONS Excitation: 12 V DC @30 mA; shortcircuit protection Frequency range: 0 – 50 Hz through 10 kHz

  • Dry Contact: Mechanical contact or open collector Pulse width time requirement: 20 μsec. min. for ON and OFF (2 msec. for ranges <100 Hz) Sensing: Approx. 12V DC @3 mA ON/OFF level: ≤200 Ω/0.6 V for ON, ≥100k Ω/6 V for OFF
  • Voltage Pulse: Square or sine waveforms Pulse width time requirement: 20 μsec. min. for high and low levels Voltage range: -30 – +30 V DC Hi level: 2 – 30 V p-p Lo level: ≤1 V Input impedance: 10k Ω minimum OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. ■ DC Voltage: 0 – 12 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 0.5 V INSTALLATION Current consumption
  • DC: Approx. 80 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 150 g (0.33 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % (output 10 – 100 %) Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: (0 – 90%) Approx. 1.8 sec. with 0 – 50 Hz Approx. 0.8 sec. with 0 – 100 Hz Approx. 0.5 sec. with 0 – 500 Hz Approx. 0.5 sec. with 0 – 10 kHz Ripple: 0.2 %p-p max. with input ≥ 10 % Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 Approval: UL/C-UL general safety requirements (UL 3111-1, CAN/CSA-C22.2 No.1010-1)

MODEL: F2SP F2SP SPECIFICATIONS ES-5434 Rev.6 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 1 2 3 4 5 6 7 8 DIN RAIL 35mm wide 22.5 (.89) 75 (2.95)

  • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Waveform Shaper Output Driver OUTPUT 12V Supply INPUT SENSOR EXCITATION 4kΩ ■ Dry Contact Input Connection Examples – +12VPWR ■ Voltage Pulse – +12VPWR Z S One-Shot Smoother POWER Specifications are subject to change without notice.