F2PP MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: F2PP F2PP SPECIFICATIONS ES-5438 Rev.6 Page 1/3 http://www.m-system.co.jp/ Super-mini Signal Conditioners F2 Series PULSE ISOLATOR Functions & Features

  • Galvanically isolating pulse rate signals
  • Input frequency = output frequency
  • Various outputs (open collector and voltage pulses)
  • High-density mounting Typical Applications
  • Isolating field pulse signals in order to reduce noises
  • Changing e.g. dry contact signal to e.g. 5 V signals 22.5 (.89) (2.95) mm (inch) 107 (4.21) MODEL: F2PP–[1][2][3]–R[4]

ORDERING INFORMATION

  • Code number: F2PP-[1][2][3]-R[4] Specify a code from below for each of [1] through [4]. (e.g. F2PP-33N-R/Q)
  • Frequency range (e.g. 0 – 1000 Hz)
  • Specify the specification for option code /Q (e.g. /C01) [1] INPUT 1: Mechanical contact (max. 30 Hz) 2: Open collector (max. 10 kHz) 3: Voltage pulse (max. 10 kHz) Note: When the output signal is Low frequency open collector, the max. input frequency is 30 Hz. [2] OUTPUT 1: Low frequency open collector (max. 30 Hz) 2: High frequency open collector (max. 10 kHz) 3: 5 V pulse (max. 10 kHz) 4: 12 V pulse (max. 10 kHz) 5: 24 V pulse (max. 10 kHz) [3] OUTPUT LOGIC N: The same as the input R: Inverted POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating GENERAL SPECIFICATIONS Construction: Stand-alone; terminal access at the front Connection: Euro type connector terminal (applicable wire size: 0.2 to 2.5 mm2, stripped length 7 mm) Housing material: Flame-resistant resin (black) Isolation: Input to output to power Frequency range: Input and output are the same. Chattering protection: Filter provided for mechanical contact input Input pulse sensing: DC coupled INPUT SPECIFICATIONS Excitation: 12 V DC @30 mA; shortcircuit protection ■ Open Collector Sensing: Approx. 12 V DC @ 3 mA ON/OFF level: ≤ 200 Ω / 0.6V for ON, ≥ 100 kΩ / 6V for OFF Low frequency open collector output Maximum frequency: 30 Hz Pulse width time requirement: 10 msec. min. for ON and OFF High frequency open collector output Maximum frequency: 10 kHz Pulse width time requirement: 10 μsec. min. for ON and OFF ■ Mechanical Contact Maximum frequency: 30 Hz Pulse width time requirement: 10 msec. min. for ON and OFF Sensing: Approx. 12 V DC @3 mA ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF ■ Voltage Pulse: Square or sine waveforms Low frequency open collector output Maximum frequency: 30 Hz

MODEL: F2PP F2PP SPECIFICATIONS ES-5438 Rev.6 Page 2/3 http://www.m-system.co.jp/ Pulse width time requirement: 10 msec. min. for ON and OFF High frequency open collector output Maximum frequency: 10 kHz Pulse width time requirement: 10 μsec. min. for ON and OFF Voltage range: -30 – +30 V DC Hi/Lo level: 2 – 30 V for high level; ≤ 1 V for low level Input impedance: 10 kΩ minimum OUTPUT SPECIFICATIONS ■ Low Frequency Open Collector:

50 V DC @100 mA (resistive load)

Maximum frequency: 30 Hz Timer: Limits within 75 ±25 msec. for wider than 75 msec. pulses ON time for output logic non-inverted OFF time for output logic inverted Saturation voltage: 0.5 V DC ■ High Frequency Open Collector: Maximum frequency: 10 kHz Saturation voltage: 0.5 V DC ■ Voltage Pulse Maximum frequency: 10 kHz High level: Rating (5, 12 or 24 V) ±10 % Low level: ≤ 0.5V Load resistance: ≥ 250 Ω for 5 V ≥ 600 Ω for 12 V ≥ 1200 Ω for 24 V INSTALLATION Current consumption

  • DC: Approx. 80 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 150 g (0.33 lb) PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 Approval: UL/C-UL general safety requirements (UL 3111-1, CAN/CSA-C22.2 No.1010-1)

MODEL: F2PP F2PP SPECIFICATIONS ES-5438 Rev.6 Page 3/3 http://www.m-system.co.jp/ OUTPUT LOGIC OFF OFF HH H H OFF ON OFF ON H L H L OFF ON OFF ON ON LL L L ON INPUT TYPE Voltage Pulse Mechanical Contact Open Collector PULSE LOGIC Non Inverted Inverted Non Inverted Inverted INPUT VOLTAGE PULSE OUTPUT OPEN COLLECTOR OUTPUT EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 1 2 3 4 5 6 7 8 DIN RAIL 35mm wide 22.5 (.89) 75 (2.95)

  • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Waveform Shaper Output Driver OUTPUT 12V Supply INPUT SENSOR EXCITATION Timer *Low freq. open collector only. 4k Ω ■ Mechanical Contact or Open Collector Input Connection Examples +12V ■ Voltage Pulse ■ Voltage Pulse +12V ■ Open Collector Output Connection Examples PWR PWR + 3 + 3 POWER Specifications are subject to change without notice.