F2AP-02-R

F2AP MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: F2AP F2AP SPECIFICATIONS ES-5436 Rev.6 Page 1/3 http://www.m-system.co.jp/ Super-mini Signal Conditioners F2 Series DC/FREQUENCY CONVERTER Functions & Features

• Providing a pulse rate output in proportion to DC input signal
• High-density mounting Typical Applications
• Totalizing applications in combination with a counter 22.5 (.89) (2.95) mm (inch) 107 (4.21) MODEL: F2AP–[1][2]–R[3]

ORDERING INFORMATION

• Code number: F2AP-[1][2]-R[3] Specify a code from below for each [1] through [3]. (e.g. F2AP-61-R/Q)
• Special input range (For codes Z & 0)
• Output frequency range (e.g. 0 – 500 Hz)
• Specify the specification for option code /Q (e.g. /C01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) D: 0 – 20 mA DC (Input resistance 50 Ω) G: 0 – 1 mA DC (Input resistance 1000 Ω) H: 10 – 50 mA DC (Input resistance 100 Ω) Z: Specify current (See INPUT SPECIFICATIONS) ( 0 % input must be 0 mA.) Voltage 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) ( 0 % input must be 0 V.) [2] OUTPUT 1: Open collector (max. 1 kHz) 2: 5 V pulse (max. 1 kHz) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating GENERAL SPECIFICATIONS Construction: Stand-alone; terminal access at the front Connection: Euro type connector terminal (applicable wire size: 0.2 to 2.5 mm2, stripped length 7 mm) Housing material: Flame-resistant resin (black) Isolation: Input to output to power Zero adjustment: 0 – 5 % (front) Span adjustment: 95 to 105 % (front) INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated Specify input resistance value for code Z. (R ≤ 0.5 W ÷ [F.S. Current]2) ■ DC Voltage: 0 – 30 V DC Minimum span: 1 V Input resistance: ≥ 1 MΩ OUTPUT SPECIFICATIONS ■ Open Collector: 30 V DC @100 mA (resistive load) Frequency range: 0 – 10 pulses/hour through 1 kHz Saturation voltage: 0.6 V DC ■ 5 V Pulse Frequency range: 0 – 10 pulses/hour through 1 kHz Hi level: 3.0 – 5.5 V Lo level: ≤ 0.5 V Load resistance: 250 Ω min.

MODEL: F2AP F2AP SPECIFICATIONS ES-5436 Rev.6 Page 2/3 http://www.m-system.co.jp/ OUTPUT PULSE WIDTH

• Open Collector • Voltage Pulse OFF ON 20 % 80 % 1 / f ■ Frequency less than 500 Hz at 100% input ➞ Duty ratio 20% (See the figure below) H Level L Level 20 % 80 % 1 / f
• Open Collector • Voltage Pulse ■ Frequency greater than 500 Hz at 100% input ➞ See the figure and equation below. H Level L Level Pulse Width OFF ON Pulse Width Pulse Width [millisec.] = 1 2.09 x 100% Frequency [kHz] INSTALLATION Current consumption
• DC: Approx. 80 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 150 g (0.33 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 Approval: UL/C-UL general safety requirements (UL 3111-1, CAN/CSA-C22.2 No.1010-1)

MODEL: F2AP F2AP SPECIFICATIONS ES-5436 Rev.6 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 1 2 3 4 5 6 7 8 DIN RAIL 35mm wide 22.5 (.89) 75 (2.95)

• When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation *Input shunt resistor incorporated for current input. INPUT

1 Output

Output Connection Examples Volt. / Freq. Converter Z S POWER /square7 Open Collector /square7 Voltage Pulse Specifications are subject to change without notice.