CIM-F22 MITSUMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FEATURES

  1. SMT-type SD memory card connector. 2. Outstanding touch! 8mm stroke type with push-in push-out eject mechanism. 3. Card detection switch and write protect switch provided. 4.Ideal for saving space on the board! Stand-off height is only 1.8mm (connector height is ultra- thin, at 2.8mm). 5. Reverse type also available. 6. Half-lock provided to prevent the card from falling out. HOW TO ORDER F22-009-21 0-A G G E- 12 3 4 5 6 7 8 9 1 Series No. (F22) 2N o. of contacts (009 : 9pins)

3 Housing material (21 : LCP resin)

4 UL grade (0 : UL94V-0)

5 Contact plating (A : Gold)

6 Contact plating thickness (G : 0.3µm)

7 Contact style (G : Angle)

8 Package (E : Taping)

9 Supplementary symbol

ST : Standard type RT : Reverse type RB : Reverse B type Rated Voltage AC 50V (rms) Rated Current 0.5A Withstanding Voltage 500V AC (rms) 1minute Insulation Resistance 1000MΩ min. (at 500V DC) Contact Resistance 100mΩ max. CHARACTERISTICS Life (Matching Cycle) 10,000 times Card Insertion Force 4.9N (0.5kgf) ~9.8N (1kgf) Eject Force 4.9N (0.5kgf) ~9.8N (1kgf) Using temperature Range -25~+90°C MECHANICAL CHARACTERISTICS

MATERIAL & FINISH Component Parts Material Finish Housing LCP resin (Black) Contact Copper Alloy Gold plating CD Switch Copper Alloy Gold plating CD · WP Switch Copper Alloy Gold plating WP Switch Copper Alloy Gold plating Wing Copper Alloy Gold plating Plate SUS - Slider PPA resin (Black) Coil Spring SUS - Lock Pin SUS - DIMENSIONS 5.625±0.1 8.03±0.1 9.75 ±0.1 13.5 11.05±0.1 0.2 0.2 0.4 28.5 +0.2 -0.1 12.85±0.1 5.8 A 0.960.2 24.1+0.1 (32.8) CARD INSERTION DIMENSION 1.56 +0.1 2.25+0.1 Center of card insertion 12.1±0.1 25.2 ±0.1 13.53 21.05 Ø1.5 0 -0.1 0.8 7.85 9.5 1.8 1.8 (3)(2) 0.35 max. 0.8 (32.8) (5.8) (0.8) STROKE (32) (5) (8.2) STROKE (41) (14) 0.3 0.8 THE LOADING SURFACE OF THE CONNECTOR RECOMMENDED PWB LAYOUT(NTS) ±0.05 3.6 3.6 13.35 26.5 14.01 2-Ø1 +0.1 0 hole 2-Ø1.9 The position in set The position in closet The position in ejection A(NTS)NOTE2 2.5 5=12.5 2.7 1.85 9.55 9.05 7.25 9.55 6.95 4.65 13.53 17.6 17.6 21.05 10.75 10.33.2 10.310.31.65 10.3 4.2 7.48 9.75 12.1 8.05 5.63 25.2 2-Ø1.6 +0.1 0 hole A 11.05 12.85 5- PART WHICH IT IS IMPOSSIBLE TO MOUNT B A(NTS) B(NTS) 1.5 0.6 1.5 0.8 1.5 22.6 0 -0.1 13.15 Standard type A(NTS) 1.5 2.7 12.5 5.63 8.03 9.75 11.05 13.5 1.8 12.85 (3)(2) Part which it is impossible to mount (26.55) (6.68) (7.18) (25.75) THE LOADING SURFACE OF THE CONNECTOR PART WHICH IT IS IMPOSSIBLE TO MOUNT THE BACK SURFACE OF CONNECTOR 19.33 3.7 4.2 25.8 Center of card insertion The position in set The position in closet The position in ejection B(NTS) 9.75 11.05 12.85 8.05 5.63 2.5 5=12.5 B 2.70.7 27.6 29.4 29.9 A 13.15 11.4 Ø1.6 2-Ø2 0.8 24.9 11.4 14.01 (0.85) (2.2) (4.7) (3.2) (2.2) (28.5) 0.61.5 1.5 0.8 RECOMMENDED PWB LAYOUT(NTS) ±0.05 THE LOADING SURFACE OF THE CONNECTOR 26.5 0.85 0.35 6.82 Ø1.1 A(NTS) 27 ±0.1 1.8±0.1 0.96±0.15 1.5 A 2.8±0.1 ±0.1 (27.35) Hole 13.35Hole Ø1 +0.1

0 Hole

(4.6) Ø1.5 0 -0.1 28.5 +0.2 -0.1 1.918±0.1 32.8 4.7 3 26.15±0.1 27.6±0.1 1.56+0.1 2.25 +0.1 24.9 ±0.1 Ø1 0 -0.1 (32.8) (5.8) (32) (0.8) STROKE (5) (41) (14) (8.2) STROKE 24.1+0.1 22.6 0 -0.1 20.6 -0.1 -0.2 17.26±0.2 >LCP< 101 >LCP< 101 >LCP< 101 >LCP< 101 Ø1 +0.1 Hole Reverse type Unit: mm Tolerance: ±0.3 Unit: mm Tolerance: ±0.3