F1T1G TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen Low forward voltage drop /cuspopen High current capability /cuspopen High reliability /cuspopen High surge current capability Mechanical Data /cuspopen Cases: Molded plastic /cuspopen Epoxy: UL 94V-0 rate flame retardant /cuspopen Lead: Axial leads, solderable per MIL-STD- 202, Method 208 guaranteed /cuspopen Polarity: Color band denotes cathode end /cuspopen High temperature soldering guaranteed: 2 6 0 ℃/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension /cuspopen Mounting position: Any /cuspopen Weight: 0.20 gram TS-1 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol F1T F1T F1T F1T F1T F1T F1T Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TA = 55℃ I(AV) 1.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 30 A Maximum Instantaneous Forward Voltage @ 1.0A VF 1.3 V Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ IR 5.0 100 uA uA Maximum Reverse Recovery Time ( Note 1 ) Trr 150 250 500 nS Typical Junction Capacitance ( Note 2 ) Cj 15 pF Typical Thermal Resistance ( Note 3 ) RθJA 90 OC/W Operating Temperature Range TJ -65 to +150 ℃ Storage Temperature Range TSTG -65 to +150 ℃ Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B.
- 379 - FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm RATINGS AND CHARACTERISTIC CURVES (F1T1G THRU F1T7G) FIG.5- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.1 1.0 .01 FORWARD VOLTAGE. (V) Tj=25 C Pulse Width=300 s 1% Duty Cycle o FIG.4- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 1 10 100 100 REVERSE VOLTAGE. (V) Tj=25 C0 PEAK FOR WARD SURGE CURRENT . (A) 1 2 4 6 8 10 20 100 40 60 80 NUMBER OF CYCLES AT 60Hz FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 8.3ms Single Half Sine Wave JEDEC Method Tj=25 C0 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 250 50 75 100 125 150 1750 0.25 0.50 0.75 1.00 1.25 1.50 AMBIENT TEMPERATURE. ( C) o Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length