F1G99 ITF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

/circle6 RF bandpass filter /circle6 Usable bandwidth 65 MHz /circle6 High attenuation /circle6 No matching 50 Ω single-ended operation /circle6 Ceramic Surface Mounted Device Package (3.0 mm × 3.0 mm) /circle6 RoHS compliant Package Dimensions Dimensions shown are nominal in millimeters Body : Al

2 O3 Ceramic

Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating Maximum Ratings Parameters Unit Minimum Typical Maximum Operating Temperature Range °C -20 25 70 Storage Temperature Range °C -40 - 85 Power Handling Capability dBm - - 12 Electrostatics Sensitive Device ( ESD ) Pin Configurations

2 Input

5 Output

1, 3, 4, 6 Case ground I 1G99

Part No. F1G99 Rev. Date 2010-06-15 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NCLD04-AS01 2/7 Specifications Fc = 1962.5 MHz Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss Minimum Typical Maximum Unit Center Frequency ( Fc ) - 1962.5 - MHz Insertion Loss (In Fc +/- 32.5 MHz) - 2.6 3.8 dB Amplitude Ripple (In Fc +/- 32.5 MHz) - 1.4 2.3 dB VSWR (In Fc +/- 32.5 MHz) - 2.0 2.5 Attenuation (Reference level from 0dB) 1710.0 MHz ~ 1755.0 MHz 1855.0 MHz ~ 1915.0 MHz 2010.0 MHz ~ 2020.0 MHz dB Temperature Range (Operational) -20 25 70 ℃ Input/Output Impedance 50 Ohms

Part No. F1G99 Rev. Date 2010-06-15 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NCLD04-AS01 3/7 Input 50 Ω Output 50 Ω Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Marking Configuration I 2) 1G99 3) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available

Part No. F1G99 Rev. Date 2010-06-15 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NCLD04-AS01 4/7 Typical Performance ( at 25 ℃℃ ℃℃ )

Part No. F1G99 Rev. Date 2010-06-15 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NCLD04-AS01 5/7 Input / Output VSWR Charts Input / Output Smith Charts

Part No. F1G99 Rev. Date 2010-06-15 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NCLD04-AS01 6/7 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. Tape Specification 1. Leader part and vacant position specification 2. Tensile strength of carrier tape 4.4N/mm width 3. Top cover tape adhesion 1) pull off angle : 0~15 ° 2) speed : 300mm/min 3) force : 20~70g REEL REEL REEL REEL TOP COVER TAPE TOP COVER TAPE TOP COVER TAPE TOP COVER TAPE CARRIER TAPE CARRIER TAPE CARRIER TAPE CARRIER TAPE END END END END START START START START Tape Running Direction Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. 0~15 degree Top cover tape Direction of pull Carrier tape

Part No. F1G99 Rev. Date 2010-06-15 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NCLD04-AS01 7/7 Carrier Tape Dimensions [unit : mm] Part Direction Reel Dimensions [unit : mm] A 3.40 ± 0.1 B 3.40 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Tape Running Direction