STGB18N40LZT4 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 16
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package information
- 4.1 D²PAK (TO-263) type A package information
- 4.2 D²PAK packing information
Features
- AEC-Q101 qualified
- SCIS energy of 180 mJ @ T C = 150 °C, L = 3 mH
- Parts are 100% tested in SCIS
- ESD gate-emitter protection
- Gate-collector high voltage clamping
- Logic level gate drive
- Very low saturation voltage
- High pulsed current capability
- Gate and gate-emitter resistor
Applications
- Pencil coil electronic ignition driver
Description
This application-specific IGBT utilizes the most advanced PowerMESH technology optimized for coil driving in the harsh environment of automotive ignition systems. The device show very low on-state voltage and very high SCIS energy capability over a wide operating temperature range. Moreover, ESD-protected logic level gate input and an integrated gate resistor means no external protection circuitry is required. Product status link STGB18N40LZT4 Product summary Order code STGB18N40LZT4 Marking GB18N40LZ Package D²PAK Packing Tape and reel Automotive-grade 390 V internally clamped IGBT ESCIS 180 mJ STGB18N40LZT4 Datasheet DS5664 - Rev 7 - January 2021 For further information contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings
- Pulse width limited by max. junction temperature.
- For E SCIS test circuit refer to Figure 14. Test circuit for inductive load switching with A and B not connected.
Table 2. Thermal data
2 Electrical characteristics
TC = 25 °C unless otherwise specified Table 3. Static characteristics
- Defined by design, not subject to production test.
Table 4. Dynamic characteristics
Electrical characteristics
Table 5. Resistive load switching characteristics Table 6. Inductive load switching characteristics
2.1 Electrical characteristics (curves)
Figure 1. Collector-emitter on voltage vs temperature Figure 2. Collector-emitter on voltage vs temperature Figure 3. Collector-emitter on voltage vs temperature Figure 4. Self clamped inductive switch Figure 5. Output characteristics at 25 °C Figure 6. Output characteristics at -40 °C
Figure 13. Thermal impedance
3 Test circuits
Figure 14. Test circuit for inductive load switching Figure 15. Test circuit for resistive load switching Figure 16. Gate charge test circuit Figure 17. Switching waveform
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
4.1 D²PAK (TO-263) type A package information
Figure 18. D²PAK (TO-263) type A package outline
Package information
Table 7. D²PAK (TO-263) type A package mechanical data
Figure 19. D²PAK (TO-263) recommended footprint (dimensions are in mm)
4.2 D²PAK packing information
Figure 20. D²PAK tape outline
Figure 21. D²PAK reel outline Table 8. D²PAK tape and reel mechanical data
Revision history
Table 9. Document revision history 18-Jan-2008 1 Initial release. 07-Mar-2008 2 Modified Figure 7, Figure 8, Figure 10. The part numbers STGD18N40LZ and STGP18N40LZT4 have been removed.