FFPF10H60S FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • High Speed Switching ( t rr=25ns(Typ.) @ IF=10A )
  • High Reverse Voltage and High Reliability
  • Avalanche Energy Rated
  • Low Forward Voltage( V F=2.1V(Typ.) @ IF=10A )

Applications

  • General Purpose
  • Switching Mode Power Supply
  • Free-wheeling diode for motor application
  • Power switching circuits General Description The FFPF10H60S is hyperfast rectifier (t rr=25ns(Typ.) @ IF=10A). it has half the recovery time of ultrafast rectifier and is silicon nitride passivated ion- implanted epitaxial planar con- struction. This device is intended for use as freewheeling/clamping rectifi- ers in a variety of switching power supplies and other power swithching applications. Its low stored charge and hyperfast soft recovery minimize ringing and elec trical noise in many power switching circuits reducing power loss in the switching transis- tors. Pin Assignments Absolute Maximum Ratings Thermal Characteristics Package Marking and Ordering 1. Cathode 2. Anode TO-220F-2L Marking:F10H60S 1. Cathode 2. Anode Symbol Parameter Value Units VRRM Peak Repetitive Reverse Voltage 600 V VRWM Working Peak Reverse Voltage 600 V VR DC Blocking Voltage 600 V IF(AV) Average Rectified Forward Current @ TC = 85 °C1 0 A IFSM Non-repetitive Peak Surge Current 60Hz Single Half-Sine Wave 100 A TJ, TSTG Operating Junction and Storage Temperature - 65 to +150 °C Symbol Parameter Max Units RθJC Maximum Thermal Resistance, Junction to Case 3.4 °C/W Device Marking Device Package Reel Size Tape Width Quantity F10H60S FFPF10H60STU TO-220F - - 50 TC = 25°C unless otherwise noted TC = 25°C unless otherwise noted Information

2 www.fairchildsemi.com FFPF10H60S Rev. A FFPF10H60S Hyperfast Recovery Power Rectifier Electrical Characteristics TC = 25°C unless otherwise noted Notes: 1. Pulse : Test Pulse width = 300µs, Duty Cycle = 2% Test Circuit and Waveforms Parameter Conditions Min. Typ. Max Units VFM

1 IF = 10A

IF = 10A TC = 25 °C TC = 125 °C 2.1 2.5 2.2 V V IRM

1 VR = 600V

VR = 600V TC = 25 °C TC = 125 °C mA mA trr IF =1A, di/dt = 100A/µs, VCC = 30V IF =10A, di/dt = 50A/µs, VCC = 390V IF =10A, di/dt = 200A/µs, VCC = 390V TC = 25 °C TC = 25 °C TC = 25 °C ns ns ns t a tb Qrr IF =10A, di/dt = 50A/µs, VCC = 390V T C = 25 °C TC = 25 °C TC = 25 °C 9.0 ns ns nC WAVL Avalanche Energy (L = 40mH) 20 - - mJ

4 www.fairchildsemi.com FFPF10H60S Rev. A FFPF10H60S Hyperfast Recovery Power Rectifier Mechanical Dimensions Dimensions in Millimeters TO-220F 2L 2.54 ±0.20 0.80 ±0.10 0.35 ±0.10 2.76 ±0.20MAX1.47 (1.00x45°) (0.70) 3.30 ±0.10 15.87 ±0.20 (1.80) (6.50) 6.68 ±0.20 10.16 ±0.20 9.40 ±0.20 ø3.18 ±0.10 2.54TYP [2.54 ±0.20] 2.54TYP –0.05

5 www.fairchildsemi.com FFPF10H60S Rev. A FFPF10H60S Hyperfast Recovery Power Rectifier Rev. I19 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR U SE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FA IRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRIT TEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E 2CMOS™ EnSigna™ FACT™ FAST® FASTr™ FPS™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ I 2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET VCX™ Wire™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise Programmable Active Droop™ Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datas heet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datas heet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet c ontains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.