F09P-K700 MOLEX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 95 DS 10/2007 Waterproof Connector Systems Wasserdichte Steckverbindersysteme Ordering Code for Waterproof Connectors Bestellschlüssel für wasserdichte Steckverbinder UL Recognized File No. E168813 The waterproofness of the end appliance is not content of the UL-inspection Die Wasserdichtheit des Endsystems ist nicht Inhalt der UL-Prüfung..
96 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)DS 10/2007
Protection standard / Schutzart DIN EN 60529 - IP 67 Mating force per signal contact / Steckkraft pro Signalkontakt d3,4 N Unmating force per signal contact / Ziehkraft pro Signalkontakt t0,2 N Operating temperature range Betriebstemperaturbereich -25 °C bis +70 °C (-13 °F to +158 °F) Materials and Platings Materialien und Oberflächen Shell Brass, tin plated over nickel Gehäuse Messing, verzinnt über Nickel Insulator and plastic watertight frame Thermoplastic, glass filled (UL94V-0) Isolierkörper und Kunststoffdichtrahmen Thermoplast, glasfaserverstärkt (UL94V-0) Metal watertight frame nickel plated zinc die-cast Metalldichtrahmen Zinkdruckguss, vernickelt Contact material Copper alloy Kontaktmaterial Kupfer-Legierung Contacts Machined, copper alloy, 0.8 m (31 microinches) Au over Ni, termination area tin plated Kontakte gedreht, Kupferlegierung, 0,8 m Au über Nickel, Anschlussbereich verzinnt Waterproofing elements Silicone Dichtelement Silikon Technical Data Technische Daten Mechanical Data Mechanische Daten Electrical Data Elektrische Daten Materials and Platings Materialien und Oberflächen Electrical Data Elektrische Daten Current rating 5 AMaximale Stromstärke Test voltage between 2 contacts / shell and contact 1200 V / 1 min. Prüfspannung zwischen 2 Kontakten bzw. Kontakt und Gehäuse Meets transitional resistance requirements per contact pair, in accordance with DIN 41652 Erfüllt Übergangswiderstand pro Kontaktpaar nach DIN 41652 für - Straight contacts / gerade Kontakte d 10 m: - Right angled contacts / abgewinkelte Kontakte d 25 m: - Right angled contacts - 50 way / abgewinkelte Kontakte bei 50 Polen d 35 m: Insulation resistance between contacts tIsolationswiderstand Kontakt / Kontakt 5000 M: Volume resistivity 1016 Spezifischer Durchgangswiderstand : cm Dielectric strength 50 kV / mmSpezifische Durchschlagsfestigkeit
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 97 DS 10/2007 Connectors with Solder Pot Termination, Front Mounting Steckverbinder mit Löttopfanschluss, frontseitige Montage Waterproof Connectors with Plastic Watertight Frames Wasserdichte Steckverbinder mit Kunststoffdichtrahmen Connectors with Solder Pot Termination, Rear Mounting Steckverbinder mit Löttopfanschluss, rückseitige Montage Connectors with Solder Pot Termination, max. AWG 20 Steckverbinder mit Löttopfanschluss, max. AWG 20 Number of Contacts A B Order Number Pin Order Number Socket Inner Thread Polzahl ±0,2 ±0,1 Bestellnummer Stift Bestellnummer Buchse Innengewinde 9 40,0 25,0 FWDF09P FWDF09S Standard -K413(1.575) (0.984) Standard 15 48,3 33,3 FWDF15P FWDF15S Standard -K413(1.902) (1.311) Standard 25 62,0 47,04 FWDF25P FWDF25S Standard -K413(2.441) (1.852) Standard Connectors with Solder Pot Termination, max. AWG 20 Steckverbinder mit Löttopfanschluss, max. AWG 20 Number of Contacts A B Order Number Pin Order Number Socket Inner Thread Polzahl ±0,2 ±0,1 Bestellnummer Stift Bestellnummer Buchse Innengewinde 9 40,0 25,0 FWDR09P FWDR09S Standard -K414(1.575) (0.984) Standard 15 48,3 33,3 FWDR15P FWDR15S Standard -K414(1.902) (1.311) Standard 25 62,0 47,04 FWDR25P FWDR25S Standard -K414(2.441) (1.852) Standard
98 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)DS 10/2007
Connectors with Straight PCB Termination, Ø 0.6 mm (Ø 0.024"), Pre-tinned Steckverbinder mit geradem Einlötanschluss, Ø 0,6 mm, vorverzinnt Number of Contacts A B Order Number Pin Order Number Socket Inner Thread Polzahl ±0,2 ±0,1 Bestellnummer Stift Bestellnummer Buchse Innengewinde 9 40,0 25,0 FWDR09P1 FWDR09S1 Standard -K415(1.575) (0.984) Standard 15 48,3 33,3 FWDR15P1 FWDR15S1 Standard -K415(1.902) (1.311) Standard 25 62,0 47,04 FWDR25P1 FWDR25S1 Standard -K415(2.441) (1.852) Standard Connectors with Right Angled PCB Termination, Ø 0.6 mm (Ø 0.024"), Pre-tinned Steckverbinder mit abgewinkeltem Einlötanschluss, Ø 0,6 mm, vorverzinnt Number of Contacts A B Order Number Pin Order Number Socket Inner Thread Polzahl ±0,2 ±0,1 Bestellnummer Stift Bestellnummer Buchse Innengewinde 9 40,0 25,0 FWDR09P25 FWDR09S25 Standard -K416(1.575) (0.984) Standard 15 48,3 33,3 FWDR15P25 FWDR15S25 Standard -K416(1.902) (1.311) Standard 25 62,0 47,04 FWDR25P25 FWDR25S25 Standard -K416(2.441) (1.852) Standard Waterproof Connectors with Plastic Watertight Frame Wasserdichte Steckverbinder mit Kunststoffdichtrahmen Connectors with Right Angled PCB Terminations Steckverbinder mit abgewinkeltem Leiterplattenanschluss Connectors with Straight PCB Termination Steckverbinder mit geradem Leiterplattenanschluss PCB hole pattern: see page 20 Leiterplattenlochbilder: siehe Seite 20 PCB hole pattern: see page 20 Leiterplattenlochbilder: siehe Seite 20
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 99 DS 10/2007 Connectors with Solder Pot Termination, Front Mounting Steckverbinder mit Löttopfanschluss, frontseitige Montage Waterproof Connectors with Metal Watertight Frame Wasserdichte Steckverbinder mit Metalldichtrahmen Connectors with Solder Pot Termination, Rear Mounting Steckverbinder mit Löttopfanschluss, rückseitige Montage Connectors with Solder Pot Termination, max. AWG 20 Steckverbinder mit Löttopfanschluss, max. AWG 20 Number of Contacts A B C Order number pin Order Number Socket Inner Thread On Request Polzahl ±0,2 ±0,1 ±0,2 Bestellnummer Stift Bestellnummer Buchse Innengewinde Auf Anfrage 9 40,0 25,0 21,0 FWDFM09P FWDFM09S Standard -K413 •(1.575) (0.984) (0.827) Standard 15 48,3 33,3 21,0 FWDFM15P FWDFM15S Standard -K413 •(1.902) (1.311) (0.827) Standard 25 62,0 47,04 21,00 FWDFM25P FWDFM25S Standard -K413 •(2.441) (1.852) (0.827) Standard 37 78,5 63,5 21,0 FWDFM37P FWDFM37S Standard -K413(3.091) (2.500) (0.827) Standard 50 76,1 61,1 23,2 FWDFM50P FWDFM50S Standard -K413 •(2.996) (2.406) (0.913) Standard Connectors with Solder Pot Termination, max. AWG 20 Steckverbinder mit Löttopfanschluss, max. AWG 20 Number of Contacts A B C Order Number Pin Order Number Socket Inner Thread On Request Polzahl ±0,2 ±0,1 ±0,2 Bestellnummer Stift Bestellnummer Buchse Innengewinde Auf Anfrage 9 40,0 25,0 21,0 FWDRM09P FWDRM09S Standard -K414 •(1.575) (0.984) (0.827) Standard 15 48,3 33,3 21,0 FWDRM15P FWDRM15S Standard -K414(1.902) (1.311) (0.827) Standard 25 62,0 47,04 21,00 FWDRM25P FWDRM25S Standard -K414(2.441) (1.852) (0.827) Standard 37 78,5 63,5 21,0 FWDRM37P FWDRM37S Standard -K414(3.091) (2.500) (0.827) Standard 50 76,1 61,1 23,2 FWDRM50P FWDRM50S Standard -K414(2.996) (2.406) (0.913) Standard
100 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)DS 10/2007
Connectors with Straight PCB Termination, Ø 0.6 mm (Ø 0.024"), Pre-tinned Steckverbinder mit geradem Einlötanschluss, Ø 0,6 mm, vorverzinnt Number of Contacts A B C Order Number Pin Order Number Socket Inner Thread On Request Polzahl ±0,2 ±0,1 ±0,2 Bestellnummer Stift Bestellnummer Buchse Innengewinde Auf Anfrage 9 40,0 25,0 21,0 FWDRM09P1 FWDRM09S1 Standard -K415 •(1.575) (0.984) (0.827) Standard 15 48,3 33,3 21,0 FWDRM15P1 FWDRM15S1 Standard -K415(1.902) (1.311) (0.827) Standard 25 62,0 47,04 21,00 FWDRM25P1 FWDRM25S1 Standard -K415(2.441) (1.852) (0.827) Standard 37 78,5 63,5 21,0 FWDRM37P1 FWDRM37S1 Standard -K415(3.091) (2.500) (0.827) Standard 50 76,1 61,1 23,2 FWDRM50P1 FWDRM50S1 Standard -K415(2.996) (2.406) (0.913) Standard Connectors with Right Angled PCB Termination, Ø 0.6 mm (Ø 0.024"), Pre-tinned Steckverbinder mit abgewinkeltem Einlötanschluss, Ø 0,6 mm, vorverzinnt Number of Contacts A B C D E Order Number Pin Order Number Socket Inner Thread On Request Polzahl ±0,2 ±0,1 ±0,2 ±0,1 ±0,2 Bestellnummer Stift Bestellnummer Buchse Innengewinde Auf Anfrage Connectors with Right Angled PCB Terminations Steckverbinder mit abgewinkeltem Leiterplattenanschluss Connectors with Straight PCB Termination Steckverbinder mit geradem Leiterplattenanschluss Waterproof Connectors with Metal Watertight Frame Wasserdichte Steckverbinder mit Metalldichtrahmen PCB hole pattern: see page 20 Leiterplattenlochbilder: siehe Seite 20 PCB hole pattern: see page 20 Leiterplattenlochbilder: siehe Seite 20
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 101 DS 10/2007 Spacer (for shell thickness 1.5 mm (0.059“) with thinner front panel, washers are required, which are included in the delivery.) Abstandsbolzen (für Gehäusewandstärke 1,5 mm, bei geringerer Stärke sind Unter- legscheiben notwendig, die im Lieferumfang enthalten sind.) O-ring glued to frame O-Ring mit Dichtrahmen verklebt Metal watertight frame FWDFM Metalldichtrahmen FWDFM Illustration: Mounting on the outer side of a machine with type FWDF09S (Please also see page 13). Abbildung: Montage auf der Geräteaußenseite bei Typ FWDF09S (siehe auch Seite 13). Front Mounting Frontseitige Montage Modifications Additon to Order No. Order Example Modifikationen Bestellnummernergänzung Bestellbeispiel Mating Side Solder Side steckseitig lötseitig 4-40 M3 K577 FWDF09S-K5774-40 M3 4-40 4-40 —— FWDF09S14-40 4-40 4-40 Solder eyelet K708 FWDR09P-K7084-40 Lötöse M3 Solder eyelet M3 Lötöse K709 FWDR09P-K709 All connectors in the FWD series are assembled with front gaskets F1043 K1063 FWDR09S-K1063Alle Steckverbinder der Baureihe FWD mit montierten Frontdichtungen F1043 Modifications of Waterproof Connectors Modifikationen wasserdichte Steckverbinder Rear Mounting Rückseitige Montage O-ring glued onto frame O-Ring am Dichtrahmen verklebt Front panel Frontplatte Metal watertight frame FWDRM Metalldichtrahmen FWDRM Illustration and drawing: Mounting on the inside of a machine with type FWDR09S (Please also see page 13). Abbildung und Zeichnung: Montage auf der Geräteinnenseite bei Typ FWDR09S (siehe auch Seite 13). Distance Bolts Available Lieferbare Abstandsbolzen Inner and Outer Thread Order Number Innen- und Außengewinde Bestellnummer M3 F-GSCH1/5-K834 4-40 UNC F-GSCH1/5-K835
102 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)DS 10/2007
connectors (see drawing). They can also be used with standard D-Sub connectors. Stiftstecker montiert (siehe Zeichnung). Sie sind auch mit Standard D-Sub Steckverbindern verwendbar. Front Seal Frontdichtung Accessories for Pin Connectors Zubehör für Stiftsteckverbinder Ordering Data (Waterproof D-Sub Connectors for FWH Hoods) Bestelldaten (wasserdichte D-Sub Steckverbinder für Hauben FWH) Order Number Shell Size Number of Contacts Bestellnummer Gehäusegröße Polzahl F09P-K700 1 9 F15P-K700 2 15 F25P-K700 3 25 F37P-K700 4 37 F50P-K700 5 50 Order Number Shell Size Number of Contacts Bestellnummer Gehäusegröße Polzahl F09S-K700 1 9 F15S-K700 2 15 F25S-K700 3 25 F37S-K700 4 37 F50S-K700 5 50 Order Number Shell Size Number of Contacts Bestellnummer Gehäusegröße Polzahl F1043-1 1 9 F1043-2 2 15 F1043-3 3 25 F1043-4 4 37 F1043-5 5 50 Material Specification Materialbeschreibung Material Silicone Material Silikon Thickness 0,8 Dicke (0.031) Information / Information: D-Sub pin and socket connectors for waterproof hoods are only available for solder pot terminations. Die D-Sub Stift- und Buchsensteckverbinder für wasserdichte Hauben sind nur mit Löttopfanschluss verfügbar. Packing Unit Verpackungseinheit 2 locking screws 2 St. Verriegelungsschrauben 2 washers 2 St. Unterlegscheiben 1 front seal 1 St. Frontdichtung 2 distance bolts 2 St. Abstandsbolzen For information on FWH hoods, please refer to our hoods catalogue. Informationen zur Haube FWH entnehmen Sie bitte unserem Haubenkatalog.
Click to View Pricing, Inventory, Delivery & Lifecycle Information: FCT Electronics: F25P-K700 Molex: FWDR25S FWDR25P FWDR15P FWDR15S F15P-K700 FWDR09P FWDR09S F09P-K700 F09S-K700 F15S- K700 F25S-K700 FWDRM09P FWDR09P25-K1063 FWDR09S25