F0603HI2500V032TM AEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Website: www.aemchina.com & www.aemcomponents.com Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR(Ω)1 Nominal I2t (A2s)2 Marking (Optional)3 F0603HI1000V032TM 1.0 32
50 A at rated
0.210 0.08 E F0603HI1500V032TM 1.5 32 0.101 0.11 G F0603HI2000V032TM 2.0 32 0.057 0.24 I F0603HI2500V032TM 2.5 32 0.042 0.56 J F0603HI3000V032TM 3.0 32 0.030 0.72 K F0603HI3500V032TM 3.5 32 0.022 1.10 L F0603HI4000V032TM 4.0 32 0.018 2.08 M F0603HI4500V032TM 4.5 32 0.014 2.63 T F0603HI5000V032TM 5.0 32 0.013 3.25 N F0603HI6000V032TM 6.0 32 70 A at rated voltage 0.010 4.00 O F0603HI7000V032TM 7.0 32 0.008 5.00 P 80 A at rated voltage F0603HI8000V032TM 8.0 32 0.006 7.00 R SolidMatrix® Surface Mount Fuses HI Series (High Inrush), 0603 Size Features: Clearing Time Characteristics: Agency Approval: Recognized Under the Components Program of UL. File Number: E232989. Patents: Ordering Information:
- High inrush current withstanding capability
- Ceramic Monolithic structure
- Silver fusing element and silver termination with nickel and tin plating
- Symmetrical design with marking on both sides (optional)
- Operating temperature range: -55°C to +150°C (with de- rating) Shape and Dimensions: Unit Inch mm L 0.063 ± 0.006 1.60 ± 0.15 W 0.031 ± 0.006 0.80 ± 0.15 T 0.031 ± 0.006 0.80 ± 0.15 B 0.014 ± 0.006 0.36 ± 0.15 W T B L % of Current Rating Clearing time at 25°C 100% 4 hours min. 200% 1 second min. 60 seconds max. 1000% (1-5A) 0.0002 seconds min. 0.02 seconds max. Patent numbers “US6,602,766”, “US7,268,661 B2”, “ZL02114719.1”, “ZL200410104280.7”, “ZL201020551360.8”, “ZL201010299185.2”, “ZL201220030614.0”, “ZL201210020693.1”.
Website: www.aemchina.com & www.aemcomponents.com Revision of May 2019 0.001 0.01 0.1 100 1 10 100 1000 Pre-arcing Time (s) Current (A) SolidMatrix® Surface Mount Fuses HI Series (High Inrush), 0603 Size Average Pre-arcing Time Curves: 1.0 A 1.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 4.5 A 5.0 A 6.0 A 7.0 A 8.0 A
Website: www.aemchina.com & www.aemcomponents.com 0.01 0.1 100 1000 10000 0.001 0.01 0.1 1 10 100 I2t (A2s) Time (s) SolidMatrix® Surface Mount Fuses HI Series (High Inrush), 0603 Size Average I2t vs. t Curves: 8.0 A 7.0 A 6.0 A 5.0 A 4.5 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A 1.5 A 1.0 A
Website: www.aemchina.com & www.aemcomponents.com Revision of May 2019 SolidMatrix® Surface Mount Fuses F 0603 FA 1000 V032 T M (1) Product Code: F－Chip Fuse (2) Size Code: Standard EIA Chip Sizes (3) Series Code: FA - Fast Acting, SB - Slow Blow, HI - High Inrush, FF - Very Fast Acting, HB - High Current (4) Current Rating Code: 1000 - 1000 mA (For HB, 10 - 10A) (5) Voltage Rating Code: V032 - 32 VDC (6) Package Code: T - Tape & Reel, B - Bulk (7) Marking Code: M - With Marking Product Identification: Recommended Land Pattern: 0.087 (2.20) 0.031 (0.80) 0.039 (1.00) Inch (mm) 0.063 (1.60) 0.016 (0.40) 0.028 (0.70) Inch (mm) 0.173 (4.40) 0.059 (1.50) 0.071 (1.80) Inch (mm)
0402 Size 0603 Size 1206 Size
Environmental Tests: No. Test Requirement Test condition Test reference
1 Soldering heat resistance DCR change 10%
No mechanical damage One dip at 260C for 60 seconds MIL-STD-202 Method 210
2 Solderability Minimum 95% coverage One dip at 245C for 5 seconds MIL-STD-202
3 Thermal shock DCR change 10%
No mechanical damage 100 cycles between -65C and +125C MIL-STD-202 Method 107
4 Moisture resistance DCR change 15%
No excessive corrosion 10 cycles MIL-STD-202 Method 106
5 Salt spray DCR change 10%
No excessive corrosion 48 hour exposure MIL-STD-202 Method 101
6 Mechanical vibration DCR change 10%
No mechanical damage 0.4 ” D.A. or 30 G between 5 – 3000 Hz MIL-STD-202 Method 204
7 Mechanical shock DCR change 10%
No mechanical damage 1500 G, 0.5 ms, half-sine shocks MIL-STD-202 Method 213
8 Life
No electrical “opens” during testing voltage drop change shall be less than 20% of initial value 80% rated current (75% for < 1 A fuses) for 2000 hours at ambient temperature between +20C and +30C Refer to AEM QIQ106 F 1206 HC 20A0 T M (1) Product Code: F－Chip Fuse (2) Size Code: L x W (inch), the first two digits-L (length), the last two digits-W (width) (3) Series Code: HC Series (4) Current Rating Code: 20A0—20.0A (5) Package Code: T - Tape & Reel, B - Bulk
Website: www.aemchina.com & www.aemcomponents.com SolidMatrix® Surface Mount Fuses Clearing Time Characteristics: Same as specified on the Short Form Data Sheet Insulation Resistance after Opening: 20,000 ohms typical when cleared with rated voltage applied. Fuse clearing under low voltage conditions may result in lower after clearing insulation resistance values. (Note: Under normal fault conditions (low or rated voltage conditions), AEM SolidMatrix fuses provide sufficient after clearing insulation resistance values for circuit protection.) Current Carrying Capacity: 100% rated current at +25°C ambient for 4 hours minimum when evaluated per MIL -PRF-23419 Interrupt Ratings: Electrical Specification: Fuse Selection and Temperature De-rating Guideline: The ambient temperature affects the current carrying capacity of fuses. When a fuse is operating at a temperature higher than 25°C, the fuse shall be “de-rated”. To select a fuse from the catalog, the following rule may be followed: Catalog Fuse Current Rating = Nominal Operating Current / 0.75 / % De -rating at the maximum operating temperature. Example: At maximum operating temperature of 65°C, % De -rating is 90%. The nominal operating current is 4 A. The current rating for fuse selected from the catalog shall be: 4 / 0.75 / 90% = 5.9 or 6 A. Specifications and descriptions in this literature are as accurate as known at the time of publish, but are subject to change without notice.
Website: www.aemchina.com & www.aemcomponents.com Revision of May 2019 Soldering Temperature Profile: SolidMatrix® Surface Mount Fuses Profile Feature Pb-Free Assembly Preheat/Soak Temperature Min (Tsmin) Temperature Max(Tsmax) Time(ts) from (Tsmin to Tsmax) 150°C 200°C 60~120 seconds Ramp-uprate (TL to Tp) 3°C/second max. Liquidous temperature(TL) Time(tL) maintained above TL 217°C 60~150 seconds Peak package body temperature (Tp) 260°C Time (tp)*within 5°C of the specified classification temperature (Tc) 30 seconds * Ramp-down rate (Tp to TL) 6°C/second max. Time 25°C to peak temperature 8 minutes max. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum * Recommended Temperature Profile for Wave Soldering * Recommended Temperature Profile for Reflow Soldering Notice: Wave Soldering is suitable for 1206 and 0603 size. Chip Size Parts on 7 inch (178 mm) Reel 0402 (1005) 10,000 0603 (1608) 4,000 0603FF (1608) 6,000 1206 (3216) 3,000 Packaging:
Website: www.aemchina.com & www.aemcomponents.com Revision of May 2019 Disclaimer Specifications are subject to change without notice. AEM products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive, aerospace, medical, life -saving applications, or any other application which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party’s life, body or property) not expressly set forth in applicable AEM product documentation. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Warranties granted by AEM shall be deemed void for products used for any purpose not expressly set forth in applicable AEM product documentation. AEM shall not be liable for any claims or damages arising out of products used in applications not expressly intended by AEM as set forth in applicable AEM product documentation. The sale and use of AEM products is subject to AEM terms and conditions of sale. Please refer to AEM’s website for updated catalog and terms and conditions of sale.