F0503N-1WR3 MORNSUN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

F05_N-1WR3 series 2018.07.26-A/3 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Selection Guide Certification Part No. Input Voltage (VDC) Output Efficiency (%,Min./Typ.) @ Full Load Max. Capacitive Load(µF) Nominal (Range) Output Voltage (VDC) Output Current (mA)(Max./Min.) UL/CE F0503N-1WR3 (4.5-5.5) 3.3 303/30 70/74 2400 F0505N-1WR3 5 200/20 78/82 2400 F0509N-1WR3 9 111/12 79/83 1000 F0512N-1WR3 12 84/9 79/83 560 F0515N-1WR3 15 67/7 79/83 560 F0524N-1WR3 24 42/4 81/85 220 Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Current (full load / no-load) 3.3VDC/5VDC output -- 270/5 286/10 mA 9VDC/12VDC output -- 241/12 254/20 15VDC/24VDC output -- 241/18 254/30 Reflected Ripple Current* -- 15 -- Surge Voltage (1sec. max.) 5VDC input -0.7 -- 9 VDC Input Filter Filter capacitor Hot Plug Unavailable Note: * Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation. Output Specifications Item Operating Conditions Min. Typ. Max. Unit Output Voltage Accuracy See tolerance envelope curve(Fig. 1) Line Regulation Input voltage change: ±1% 3.3VDC output -- -- 1.5 %/% others output -- -- 1.2 Load Regulation 10%-100% load 3.3VDC output -- 15 20 5VDC output -- 10 15 9VDC output -- 8 10 12VDC output -- 7 10 15VDC output -- 6 10 24VDC output -- 5 10 Ripple & Noise* 20MHz bandwidth 24VDC output -- 50 100 mVp-p others output -- 30 75 1W, Fixed input voltage, isolated & unregulated single output Patent Protection RoHS

FEATURES

 Continuous short-circuit protection  No-load input current as low as 5mA  Operating temperature range: -40℃ to +105℃  Isolation voltage: 3K VDC  High efficiency up to 85%  International standard pin-out  Compact DIP package  UL62368, EN62368 approval F05_N-1WR3 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for: pure digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits.

F05_N-1WR3 series 2018.07.26-A/3 Page 2 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Temperature Coefficient 100% load -- ±0.02 -- %/℃ Short Circuit Protection Continuous, self-recovery Note: * Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation; Physical Specifications Casing Material Black flame-retardant and heat-resistant plastic (UL94 V-0) Dimensions 12.70*10.16*8.20 mm Weight 1.8g(Typ.) Cooling Method Free air convection EMC Specifications EMI CE CISPR32/EN55032 CLASS B (see Fig. 4 for recommended circuit) RE CISPR32/EN55032 CLASS B (see Fig. 4 for recommended circuit) EMS ESD IEC/EN61000-4-2 Air ±8kV , Contact ±4kV perf. Criteria B Product Characteristic Curve

3.3 VDC output

Fig. 1 General Specifications Item Operating Conditions Min. Typ. Max. Unit Insulation Voltage Input-output, with the test time of 1 minute and the leak current lower than 1mA 3000 -- -- VDC Insulation Resistance Input-output, isolation voltage 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output, 100KHz/0.1V -- 20 -- pF Operating Temperature Derating when operating temperature up to 85℃, (see Fig. 2) -40 -- 105 Storage Temperature -55 -- 125 Casing Temperature Rise Ta=25℃ 3.3VDC output -- 25 -- others output -- 15 -- Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds -- -- 300 Storage Humidity Non-condensing -- -- 95 %RH Switching Frequency 100% load, nominal input voltage -- 270 -- KHz MTBF MIL-HDBK-217F@25℃ 3500 -- -- K hours

F05_N-1WR3 series 2018.07.26-A/3 Page 3 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation 120 100 Output Power Percent(%) Ambient Temp.( )℃ Temperature Derating Curve Safe Operating Area -40 0 40 85 105 120 Fig. 2 Design Reference 1. Typical application circuit If it is required to further reduce input and output ripple, a filter capacitor may be connected to the input and output terminals, see Fig.3. Moreover, choosing a suitable filter capacitor is very important, start-up problems may be caused if the capacitance is too large. Under the condition of safe and reliable operation, the recommended capacitive load values are shown in Table 1. Vin GND +Vo DCCin DC Cout Fig.3 Recommended capacitive load value table (Table 1) Vin(VDC) Cin(µF) Vo (VDC) Cout(µF) 5 4.7 3.3/5 10 -- -- 9/12 2.2 -- -- 15/24 1 2. EMC solution-recommended circuit Fig. 4 EMC recommended circuit value table (Table 2) Input voltage 5VDC Output voltage (VDC) 5/9 12/15 EMI C1/C2 4.7µF /25V 4.7µF /25V CY -- 1nF/4KVDC VISHAY HGZ102MBP TDK CD45-E2GA102M-GKA C3 Refer to the Cout in table 1 LDM 6.8µH 6.8µH Note: In the case of actual use, the requirements for EMI are high, it is subject to CY .

F05_N-1WR3 series 2018.07.26-A/3 Page 4 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation 3. For more information please find DC-DC converter application notes on www.mornsun-power.com Dimensions and Recommended Layout Notes: 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing bag number: 58200011; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 3. The maximum capacitive load offered were tested at input voltage range and full load; 4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load; 5. All index testing methods in this datasheet are based on our Company’s corporate standards; 6. We can provide product customization service, please contact our technicians directly for specific information; 7. Products are related to laws and regulations: see "Features" and "EMC"; 8. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units. MORNSUN Guangzhou Science & Technology Co., Ltd. Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: info@mornsun.cn