EVLDRIVE102BH STM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Datasheet sections
- 1 Specifications
Features
- Operating voltage from 6 V to 50 V
- Output current up to 12 Arms: power stage based on STL220N6F7 60 V, 1.2 mΩ N-channel power MOSFETs
- Three-shunt configuration
- STDRIVE102BH triple half-bridge gate driver: – Programmable gate current (up to 1 A source / 2 A sink) – Charge pump for 100 % duty cycle operation – Three embedded operational amplifiers and three comparators for current sensing and overcurrent detection – Full set of protections: UVLO, thermal shutdown, VDS monitoring
- Input connector for Hall-effect based sensors and encoder
- Motor BEMF sensing network
- Bus voltage sensing
- NTC temperature sensing
- Morpho connectors compatible with a wide range of STM32 NUCLEO boards
Applications
- Battery supplied power tools
- Portable vacuum cleaners
- E-bikes
- Industrial automation
- Robotics
- Pumps and fans
Description
The EVLDRIVE102BH evaluation board is a three-phase inverter based on the STL220N6F7 power MOSFETs. This evaluation board allows a full evaluation of the features of the STDRIVE102BH, a triple half-bridge gate driver. The power stage uses a three-shunt topology: the current sensing and the overcurrent protections are implemented using the three operational amplifiers and the three comparators embedded in the STDRIVE102BH. The embedded protections of the STDRIVE102BH, such as the UVLO on the driving voltage and the VDS monitoring for each power MOSFET, ensure a safe driving operation of the power stage. The EVLDRIVE102BH evaluation board is thermally protected by exploiting both the hardware thermal shutdown protection embedded in the STDRIVE102BH and also an onboard NTC sensor placed close to the power stage, for a firmware thermal protection. The two diagnostic pins of the STDRIVE102BH, the nFAULT pin for the protection events and the FLAG pin for the drivers’ supply warning, are both connected to the control board and are also visible through two different LED indicators. Product status link EVLDRIVE102BH STDRIVE102BH STL220N6F7 STDRIVE102BH evaluation board for three-phase brushless motors EVLDRIVE102BH Data brief DB5414 - Rev 1 - March 2025 For further information, contact your local STMicroelectronics sales office.
The EVLDRIVE102BH evaluation board can support FOC and six-step motion control algorithms. In case the motor is equipped with positioning sensors, they can be connected to the connector for Hall-effect based sensors and for the encoder, in order to increase the precision of the control algorithms. Nevertheless, sensorless control algorithms can be implemented as well: each output phase of the inverter has a read-out network, which allows the sensing of the phase voltage/BEMF of the motor. In addition, the bus voltage sensing present on the board ensures that the control algorithms are properly implemented. The EVLDRIVE102BH evaluation board is compatible with a wide range of Nucleo control boards, thus allowing the evaluation of the STDRIVE102BH together with different STM32 microcontrollers. EVLDRIVE102BH DB5414 - Rev 1 page 2/6
1 Specifications
Ratings of the board can be found in Table 1. Table 1. EVLDRIVE102BH - specifications
- At 25 °C ambient temperature
Revision history
Table 2. Document revision history 24-Mar-2025 1 Initial release.
IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2025 STMicroelectronics – All rights reserved EVLDRIVE102BH DB5414 - Rev 1 page 6/6