EVL400W-80PL STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 9

Technical content

Datasheet sections

  • 1 Electrical diagram
  • 2 Bill of material

Features

  • Universal input mains voltage range: from 90 Vac to 264 Vac – frequency from 45 to 65 Hz
  • Output voltage: 12 V at 33 A continuous operation
  • Overall efficiency at full load: > 89%, according to ENERGY STAR® 6.1 limit for computer and compliant with 80Plus PLATINUM level
  • Average efficiency: > 89%, according to European CoC ver. 5 Tier 2 for external power supplies
  • Efficiency at 250 mW > 50%, compliant to EuP lot 6 Tier 2 limit for household and office equipment
  • No load mains consumption: < 150 mW at 230 Vac, below European CoC ver.

5 Tier 2 limit for external power supplies

  • Mains harmonics: meets EN-61000-3-2 Class-D and JEITA-MITI Class-D
  • EMI: according to EN55022 Class-B
  • Safety: meets EN60950 standards
  • RoHS compliant

Description

The EVL400W-80PL demonstration board is a 12 V - 400 W converter, tailored to the typical specifications of an AC/DC adapter with wide input mains range, very low power consumption at light load and good average efficiency. It is composed by a motherboard mounting the high voltage power devices, the primary control board mounting the IC controllers L4985A and L6699 and the secondary control board for the synchronous rectification. The architecture is based on a two-stage approach: a front-end PFC pre-regulator based on a CCM (Continuous Conduction Mode) boost PFC controller using the L4985A, and a downstream LLC resonant half-bridge converter, designed around the L6699. At the secondary side, synchronous rectification is implemented by means of the SRK2001 that assures a very high rectification efficiency with a reduction in the size of the heatsink required. The PFC section uses the L4985A, a peak current-mode PFC controller for boost converter with a proprietary multiplier “emulator” which, in addition to the innovative THD optimizers, guarantees very low Total Harmonic Distortion (THD) performance in all operating conditions. The device operates in quasi-fixed frequency in all operating conditions thanks to a proprietary off-time modulator and includes the high voltage startup block with the circuitry to discharge the X-capacitors of the EMI filter. This level of integration allows a low-component count solution for boost PFC pre- regulators. The LLC section uses the L6699, a double-ended controller specific to series- resonant half-bridge topology. The output voltage regulation is obtained by modulating the operating frequency. The main focus of this demonstration board is the light-load efficiency, achieved through the burst mode function of both PFC and LLC controllers with the self- adaptive deadtime of the L6699, modulated by the internal logic according to the half-bridge node transition times, which allows the maximization of the transformer magnetizing inductance, reducing the primary current at light load operation. Product status link EVL400W-80PL

12 V - 400 W adapter based on L4985A, L6699 and SRK2001

DB4742 - Rev 1 - July 2022 For further information contact your local STMicroelectronics sales office.

1 Electrical diagram

Figure 1. EVL400W-80PL electrical diagram

2 Bill of material

Table 1. Bill of material - motherboard

Table 2. Bill of material – primary control board

Table 3. Bill of material - EVLSRK2001-SPF

Reference Value Description Manufacturer R201 10 R SMD standard film resistor - 1/4 W - 1% - 100 ppm/°C Vishay R202 N.M. SMD standard film resistor - 1/8 W - 5% - 250 ppm/°C Vishay R203, R204 220 R SMD standard film resistor - 1/8 W - 5% - 250 ppm/°C Vishay R205, R206, R207, R208 1 R SMD standard film resistor - 1/8 W - 5% - 250 ppm/°C Vishay R209, R210 N.M. SMD standard film resistor - 1/4 W - 5% - 250 ppm/°C Vishay EVL400W-80PL Bill of material DB4742 - Rev 1 page 6/9

Revision history

Table 4. Document revision history 05-Jul-2022 1 Initial release.

IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2022 STMicroelectronics – All rights reserved EVL400W-80PL DB4742 - Rev 1 page 9/9