YIC51009EB YIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Evaluation Kit for YIC51009EB Series EVK-YIC51009EBGGBL5 User Guide www.yic.com.tw YYIICC
Yuechung International Corp. (YIC) 2 YYIICC EVK-1009EB 1. Contents of EVK-YIC51009EBGGBL5 Item Description 1. YIC-GPS-EVK-1009EB Main Board 2. YIC-GPS-EVK-1009EB Adaptor Board 3. USB Cable USB Type B to USB Type A 4. ATGGL54138M-SMA-3 Dual Band GNSS L1+L5 Antenna 5. YIC51009EBGGBL5 Sub-1 Meter L1 + L5 GNSS Module
Yuechung International Corp. (YIC) 3 YYIICC EVK-1009EB 2. Install the PL2303 USB driver to PC
2.1 Install the PL2303 USB driver, open the computer control panel,
check the corresponding serial port. 3. Connection diagram
3.1 Carefully slide the DUT GPS module into main board, pin 1 of the module corresponds
to the arrow on main board.
3.2 Test connection
The driver has been installed successfully
Yuechung International Corp. (YIC) 4 YYIICC EVK-1009EB 4. Install test software & start
4.1 For YIC51009EB series (MediaTeK chip based)
4.1-1 Install test software: GNSS Viewer 4.1-2 Software setting ① Select the corresponding serial port ② Select the corresponding baud rate (9600 or 115200,……) ③ Click Connect to start the test Positioning time UTC time GPS satellite positioning information NMEA output statement GLONASS satellite positioning information
Yuechung International Corp. (YIC) 5 YYIICC EVK-1009EB 5. LED and Push Button description
5.1 Adaptor Board
① Red LED: POWER, always on when power on ② Blue LED: RXD, often light while DUT GPS module receiving data ③ Green LED: TXD, flash once per second when DUT GPS module start sending data ④ Push Button: POWER, push to power on and off the EVK
5.2 Main Board
PPS LED: Flash once per second after satellite position fixed