ACA2420 SKYWORKS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

204306B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 31, 2017 ACA2420 24 V, 1000 MHz, 21.5 dB Gain High Output Power Doubler Line Amplifier Data Sheet Figure 1: Hybrid Application Diagram

FEATURES

  • 21.5 dB Gain
  • 75 Ω input and output match
  • Characterized at +58 dBmV output power
  • Superior gain flatness (± 0.2 dB)
  • Very Low Distortion
  • Stable with High VSWR Load Conditions
  • Monolithic GaAs Design for Consistent Performance Part-to-Part
  • Surface Mount Package Compatible with Automatic Assembly
  • RoHS Compliant Package

APPLICATIONS

  • CATV Line Amplifiers, Deep Fiber Nodes S7 Package

16 Pin Wide Body SOIC

The ACA2420 is a highly linear, monolithic GaAs RF amplifier that has been developed to replace, in new designs, standard CATV hybrid amplifiers. Offered in a convenient surface mount package, the MMIC consists of two pairs of parallel amplifiers that are optimized for exceptionally low distortion. A hybrid equivalent that provides flat gain response and excellent input and output return loss over the 40 to 1000 MHz CATV downstream band is formed when one ACA2420 is cascaded between two appropriate transmission line baluns. RF Input RF Output 2B1B ACA2420

January 31, 2017 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204306B Figure 2: Pinout Diagram Table 1: Pin Description GND GND ISET 2AIN GND 2BIN 1BIN 1AIN GND GND 1BOUT 2BOUT 2AOUT 1AOUT Bias1A Bias 1B PIN NAME DESCRIPTION PIN NAME DESCRIPTION

1 GND Ground 9 GND Ground

2 2AIN Amplifier 2A Input 10 1BOUT Amplifier 1B Output

3 GND Ground 11 Bias 1B Bias for 1B Amplifier

4 1AIN Amplifier 1A Input 12 2BOUT Amplifier 2B Output and Supply 5 1BIN Amplifier 1B Input 13 2AOUT Amplifier 2A Output and Supply

6 ISET Current Adjust 14 Bias 1A Bias for 1A Amplifier

7 2BIN Amplifier 2B Input 15 1AOUT Amplifier 1A Output

8 GND Ground 16 GND Ground

204306B• Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 31, 2017 Table 2: Absolute Mimimum and Maximum Ratings

ELECTRICAL CHARACTERISTICS

Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges Notes: (1) Pins 2, 4, 5 and 7 should be AC-coupled. No external DC bias should be applied. (2) Pin 6 should be AC-grounded and/or pulled to ground through a resistor for current control. (3) Pins 11 and 14 are bias feeds for input amplifiers 1A and 1B. No external DC bias should be applied. (4) Pins 10 and 15 receive DC bias directly from pins 11 and 14. The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. PARAMETER MIN MAX UNIT Supply (pins 12, 13) 0 +28 VDC Current Adjust (pin 6) 0 +4 VDC RF Power at Inputs (pins 4, 5) - +75 dBmV Storage Temperature -65 +150 °C Soldering Temperature - +260 °C Soldering Time - 5.0 Sec PARAMETER MIN TYP MAX UNIT Supply: VDD (pins 12, 13)- +24- VDC Current Adjust (pin 6) -+ 1.5- VDC RF Frequency4 0- 1000 MHz Case Temperature- 40 -+ 100° C

January 31, 2017 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204306B Table 4: AC and DC Electrical Specifications (Ta = +25 °C, Vdd = +24 VDC) Notes: (1) Measured with baluns on the input and output of the device. (2) Parts measured with 77 channels, +58 dBmV power, 15.5 dB tilt at 1000 MHz. (3) Parts measured with 77 channels, +58 dBmV power, 15.5 dB tilt at 1000 MHz, plus QAM to 1GHz. (4) All specifications as measured on Evaluation Board (see Figures 13 & 14). PARAMETER MIN TYP MAX UNIT COMMENTS Ga in @ 1000 M Hz (1 ) 20.8 21 .5 22.3d B C abl e Eq ui va le nt S lo pe (1 ) -0.1 00 .7 dB Ga in F la tn ess 50 to 1000 MH z- ±0 .2 -d B No is e Fi gu re (1 ) - 5.756 .5 dB CT B (1 )

77 Ch a nne ls (2 )

77 Ch a nne ls (3 )

-7 8 -7 6- 74 dB c CS O (1 ) -7 1 -6 9 -6 7 dB c XM OD (1 ) 77C ha nnel s (3 ) -6 4 -6 3 -5 9 dB c CI N (1 )

77 Ch a nne ls ( 3) -- -5 8 dB c

Re tu rn Loss (I np ut ) (1 ) 40 -1 000 MH z -- 22 -1 8d B 75 Ω sy st em Re tu rn Loss (O ut p ut ) (1 ) 40- 900 MH z 901 -1 000 MH z -2 2 -2 2 -2 0 -1 8 dB Su pply Cu rre nt 4955 20 54 5m A Th er ma l Re si st an ce -2 .7 3. 3 o C/ W (1 ) 75 Ω sy st em

January 31, 2017 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204306B Table 5: Evaluation Board Parts List Notes: (1) N connector center pin should be approximately 80 mils in length. (2) Due to the power dissipation of this device, the printed circuit board should be mounted / attached to a heat sink. Figure 4: Balun Drawing SCHEMATIC TOP VIEW SIDE VIEW Note: See M/A-COM’s data sheet for more details. REFERENCE DESCRIPTION QTY VENDOR VENDOR P/N C1, C2, C3, C6, C7, C10, C14 0.01 uF CHIP CAP 7 MURATA GRM39X7R103K50V C4, C5, C8, C9 270 pF CHIP CAP 4 MURATA GRM39X7R271K50V C11 1.0 pF CHIP CAP 1 MURATA GRM36COG0R5C50 C15 47 uF ELECT CAP 1 DIGI-KEY CORP P5275-ND C12, C13, R2, R3 NOT USED TVS TVS 24 VOLT 600 WATT 1 DIGI-KEY CORP SMBJ24ACCCT-ND L1, L2, L3, L4 470 nH INDUCTOR 4 MURATA LQH1WA47KONO003/- 4052 R3 15 K Ohm 1 - - CONNECTOR (1) 75 Ohm N MALE PANEL MOUNT 2 PASTERNACK ENTERPRISES PE4504 T1, T2 Balun 2 M/A-COM MABA-009210-CT1760 Printed Circuit Board (2) 1 STANDARD PRINTED CIRC. INC. 24VX1AC50

204306B• Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 31, 2017 Figure 5: S7 Package Outline - 16 Pin Wide Body SOIC with Heat Slug PACKAGE OUTLINE

January 31, 2017 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204306B

ORDERING INFORMATION

DESCRIPTION COMPONENT PACKAGING ACA2420RS7P2 -40 °C to +110 °C 16 Pin Wide Body SOIC with Heat Slug Tape and Reel, 1500 pieces per Reel EVB2420 Evaluation Board Part Number

204306B• Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 31, 2017 NOTES

204306B • January 31, 2017 Copyright © 2016-2017 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks cus- tomers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liabil- ity for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice