EVB2417

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Features

 40 to 1218 MHz frequency range  Output power: ≥ +44 dBmV/channel  Gain: 25 dB at 1218 MHz  Total composite power : ≥ +64.4 dBmV  Single +24 V supply  Operating current: 240 mA (Pdiss < 6 Wdc)  Surface-mount package compatible with automatic assembly and excellent reliability  Halogen-free/RoHS compliant Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074.

Description

The ACA2417 is a highly linear low-noise, high-gain RF pre-amplifier module in the industry standard SOIC-16 wide body SMT package. Designed to drive D3.1 compliant power doublers in deep fiber node CATV infrastructure applications, the module consists of two parallel amplifiers in cascade forming a push-pull optimized for low noise, low distortion, high output power per channel, and high TCP. Advanced GaAs optimizes operating current, making the module an excellent choice for environmentally friendly “green” applications. A block diagram of the ACA2417 is shown in Figure 1. The device package and pinout are shown in Figure 2. Signal pin assignments and functional pin descriptions are described in Table 1. RF Input RF Output 1A 2A 1B 2B 204467-001 Figure 1. ACA2417 Block Diagram

Figure 2. ACA2417 Pinout Table 1. ACA2417 Signal Pin Descriptions

1 GND Ground 9 GND Ground

3 GND Ground 11 BIAS 1B Bias for 1B amplifier

6 I SET Current adjust 14 BIAS 1A Bias for 1A amplifier

8 GND Ground 16 GND Ground

Table 2. Recommended operating conditions are specified in Table 3, and electrical specifications are provided in Table 4. Table 2. ACA2417 Absolute Maximum Ratings1 or below their nominal value. Exceed ing any of the limits listed here may result in permanent damage to the device. 2 Pins 2, 4, 5, and 7 should be AC coupled. No external DC bias should be applied. 3 Pin 6 should be AC-grounded and/or pulled to ground through a resistor for current control. 4 Pins 10, 11, 14, and 15 should have no other external bias applied. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. ACA2417 Recommended Operating Conditions1 1 Performance is guaranteed only under the conditions listed in this table.

Table 4. ACA2417 Electrical Specifications1 1 Parts measured with 7 9 NTSC analog channels plus digital QAM channels to 1000 MHz, +44 dBmV output power and 0.0 dB tilt. 2 Peak deviation from a straight line be tween gain value at 50 MHz and 1218 MHz. 3 Measured in application circuit in Figure 3. 4 All specifications as measur ed on the Evaluation Board.

Evaluation Board components. Figure 3. ACA2417 Evaluation Board Schematic Table 5. ACA2417 Evaluation Board Bill of Materials (BOM)

Figure 4. ACA2417 PCB Layout Footprint Dimensions

Figure 5. ACA2417 Package Dimensions

Figure 6. ACA2417 Tape and Reel Dimensions

DATA SHEET • ACA2417: 1218 MHz CATV PUSH-PULL DRIVER AMPLIFIER Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 10 November 13, 2017 • Skyworks Proprietar y Information • Products and Product Information are Subject to Change Without Notice • 204667C

Ordering Information

Product Description Package Description Component Packaging ACA2417P2 16-pin wide body SOIC with heat slug 1500-piece tape and reel EVB2417 Evaluation Board part number Copyright © 2017 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.