EVB-T5 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Datasheet sections

  • 1 HW and SW resources
  • 1.1 ST GNSS solutions
  • 1.2 Power supply
  • 1.3 NMEA port supported
  • 1.4 Connectors
  • 1.5 Sensors
  • 1.6 Kit contents

Features

  • ST Teseo-V STA8100GA with RF Front-End STA5635A GNSS platform
  • Multiconstellation and MultiBand GNSS: GPS, Galileo Glonass, BeiDou, QZSS supported
  • USB Power Supply
  • Button: – ON/OFF button – Reset button – Boot button
  • NMEA over – UART by USB
  • PPS output
  • Leds: – PPS – Power – Antenna
  • ODO/CAN connector
  • ST ASM330LHH MEMS

Description

The EVB-T5 board is a complete standalone evaluation platform for Teseo-V STA8100GA GNSS Multi Band and Multi Constellation Receiver with STA5635A RF Front-End IC solution. The EVB-T5 is designed for best STA8100GA and STA5635A best performance. Boot and Reset buttons allow an easy programming procedure. The 4-pins connector allows access to the ODO/CAN signals to simplify car- connection. Teseo-V embeds the high performance ARM Cortex-M7 microprocessor with RF front-end able to support different bands (L1, L2 and L5), UART communication interfaces. The STA5635A is a fully integrated RF front-end able to support different bands (L2 and L5) with a programmable IF Bandwidth (7 or 13 MHz). Performance and configuration can be analysed using the ST Teseo Suite PC Tool available on www.st.com. Product status link EVB-T5 Order code References EVB-T5 Teseo-V Evaluation Board Teseo-V Evaluation Board EVB-T5 Data brief DB4139 - Rev 1 - February 2020 For further information contact your local STMicroelectronics sales office.

1 HW and SW resources

1.1 ST GNSS solutions

Teseo-V STA8100GA with STA5635A is part of ST Teseo GNSS Multi-Band and Multi Constellation family solution supported.

1.2 Power supply

Board powered through USB.

1.3 NMEA port supported

Teseo-V-UART over USB.

1.4 Connectors

The connectors are:

  • Antenna SMA Female
  • ODO/CAN signals available (on 4x1 connector)
  • SD/MMC connector

1.5 Sensors

ST ASM330LHH MEMS.

1.6 Kit contents

  • EVB-T5 Evaluation Board
  • USB cable EVB-T5 HW and SW resources DB4139 - Rev 1 page 2/5

Revision history

Table 1. Document revision history 12-Feb-2020 1 Initial release.